netflow config on a 12000
Hello I have a GSR here and am evaluating netflow analyzer 4 for purchase in future, I did install it and configure the router and can see results, I have a problem though that the results are not matching my MRTG readings, actually they seem not realisitic ! am polling for example a gigabit interface that is about 45% utilized, though I see max utilzation of 3 Mbps on the analyzer, I also can't see some customized reports outputs for certain network ranges as source, I would like to note that I
NFA stopped when opening graph without Exceed X Window serve
I downloaded and install NFA 4020 build in RedHat Linux 7.2. Sorry, it not required OS version; it's a box with Tivoli Netview installed with right to snmp query to other routers and switches. Everything seems working fine after the installation, and added several routers in. But the NFA service stopped, when I close the Exceed X-window server from my installation PC. To look into the problem, I restart the netflowanalyzer service without running Exceed in my PC. I can open the NFA website, and browser
Unable to access Nokia MIBs
I have a Nokia appliance running Checkpoint. I would like to retrieve information from the Nokia MIBs. I have followed the instructions to copy the MIBS to the ./mibs directory. I get the following error when I try to load the MIB from MIB Browser: Error parsing MIB:NOKIA-IPSO-LBCLUSTER-MIB.txt Is there an error log where I can find out the particular parsing error? I have attached the MIB file. Thanks, Jeff
Problem between FA and Cisco PIX515E ver 7.0
Here is some detail from a log: [10:40:35:598]|[10-07-2005]|[com.adventnet.la.util.pe.FormatIdentifier]|[INFO]|[17]|: IDENTIFIED LOG FORMAT FOR :: 10.20.11.243 DATA :: <166>:%PIX-session-6-305012: Teardown dynamic UDP translation from INSIDE:10.1.1.241/1055 to OUTSIDE:205.162.49.242/13088 duration 0:01:15 FORMAT ::CISCO_PIX| [10:40:35:598]|[10-07-2005]|[com.adventnet.la.util.pe.FormatIdentifier]|[INFO]|[17]|: LEARNING PRE LOG FORMAT FAILED :: 10.20.11.243 DATA :: <166>:%PIX-session-6-305012: Teardown
Interface traffic chart reports wrong information
We are currenlty testing OpManager in our environment and we are seeing some errors. The issues we are seeing is on a interface on a Cisco 6509. OpManager is reporting the max Tx traffic to be 40,000 kbps or 40 Mbps. On another monitoring tool we have had in for awhile the same interface is showing 400 Mbps..... So that tells me that one of these is wrong, but I am set to believ OpManager might be the culprit since this is a 2.0 Gb uplink interface. Has anyone else experienced issues like this before.
AIX monitoring
Hello, I'm trying to monitor some AIX servers via SNMP, but I have some problem, for example, even if I'm able to browse the CPU utilization with the command : HOST-RESOURCES-MIB::hrProcessorLoad.1 = INTEGER: 0 HOST-RESOURCES-MIB::hrProcessorLoad.2 = INTEGER: 0 I tried to add the corresponding resource monitor (snmp, cpu utilization via HOST-RESOURCES) but OpManager complains about the monitor is not responding
Creating Auto-Login links for the webclient
Im trying to link op manager to an existing website that I have. The trick is that I want to link to op manager from the current site and not have to login. So basically I need to know what code I need to make this auto login take place. Let me know. Thanks!
Cannot add Network to Discovery
I have just installed the demo of OpManager. When I try to add a network to the Discovery, it keeps telling me "Enter a valid network address". I have tried the following combinations: Network Address: 172.21.29.195 (my IP on my local network) Subnet: 255.255.0.0 (to include my other subnets of 172.21.29.*, 172.21.30.*, 172.21.31.*) I have also tried Subnet 255.255.255.0 I have also tried Network addresses 172.21.29.1, 172.21.29.255, etc... Nothing works! Please help! What am I missing? :oops:
MS Exchange 2000 / Upgrade Opmanager 5.0 to 5.6
Hi, I upgrade opmanager 5.0 to 5.6 following these procedure: 1.- Applied pack to 5.0 (build number 5004). Result opmanager 5.5. 2.- Applied pack to 5.5 (build number 5504). Result opmanager 5.6 After this procedure, in the snapshot for server (running exchange 2000), I tried to add application monitor for exchange 2000, and the menu display MS Exchange 5.5. The most importan chatracteristic to opmanager 5.6 is monitor exchange 2000/2003 but after upgrade don�t appears this option. Thank
Data collected, but nothing on traffic or application tabs
Hi Guys I have now instaleld my licenced version of NFA, and am collecting traffic from routers okay, however, when querying an interface, I can see detail in the source, destination and conversation tabs, but none in the traffic or application tabs. Can anyone suggest what might be wrong please? Thanks Stuart
Test of OpManager, support needed
Hi all! I'm testing OpManager with the intensions of replacing CA UniCenter. But I've got a few problems with HP-UX and Netware servers. Netware: The netware servers are running the hostmib.nlm (20040805) and I can use mib browser to see all required information. The CPU utilization monitor also work. This monitor are using the CPU Utilization based on HOSTRESOURCE MIB. But what should I do with disk and memory monitors? I know I could make custom monitors, but these things should work straight out
tipping point IPS
Would like to use firewall analyzer with my Tipping Point IPS syslogs?? Added it under syslog server with another port. Pointed the Tipping Point to the the syslog server and port but it still doesn't show up? Even on the nonparsed log files either.
removal of syslogs
How do I remove the syslog servers the delete X is greyed out. Also, why is it reading the 127.0.0.1 address instead of the real address?
NFA doesn't want to start
Hi, I just installed NFA on win2k sp4. The installation process run without a flaw, but when I want start NFA through the desktop icon it gave an error message like this: Server is starting. This may take a minute ... This evaluation copy is valid for 29 days Database creation failed. Stopping the Server. Please refer logs for more inform ation Press any key to continue . . . and it won't start at all, even if I tried to run the run.bat script from bin folder. I tried to check the log file, but couldn't
upgraded to the latest service pack 10 and cannot email now.
After upgrading the Helpdesk with Service pack 10, Notification emails are failing and only sms is working.
Possible to customise the login page
Is it possible to customise the login page, we are looking to make SD+ the default page for all our users where currently we use google as our homepage. If we make SD our homepage is it possible to customise the login page that it also can contain links to www.google.com and our corporate intranet page http:xxxx.net at the bottom of the login page Thanks Saleem
Email Notification
Hi, When I try to set up email proxy, and go to test message, I get the following error message: Unable to connect to the mail server. Please check if the Mail service is running on the specified port. The port I used was 25. The mail has to go through an Exchange server. Is there perhaps another port that must be used. Please help
HP-UX CPU Utilization
I'm trying to get the %CPU Utilization out of an HP-UX 900/300 via the "hp-unix" MIB. The following is the custom monitor: <CUSTOMGRAPH Name="HPUXCPUUtilization"> <YAXISTEXT>%</YAXISTEXT> <DISPLAYNAME>HP-UX % CPU Utilization</DISPLAYNAME> <name>HPUXCPUUtilization</name> <oid> (((.1.3.6.1.4.1.11.2.3.1.1.13)+(.1.3.6.1.4.1.11.2.3.1.1.14)) / ((.1.3.6.1.4.1.11.2.3.1.1.13)+(.1.3.6.1.4.1.11.2.3.1.1.14)+(.1.3.6.1.4.1.11.2.3.1.1.15))) * 100 </oid> <type>node</type> <timeAvg/> <interval>900</interval> <THRESHOLDENABLED>false</THRESHOLDENABLED>
My server is also only retriving logs from local machine.
I setup Eventlog Analyzer today and so far I'm very impressed. However I can not get it to pull remote server logs even after confirming successful authentication. I noticed other people have this problem. Is there a common fix or do you need me to generate a log?
How to get MS-SQL Server Stats
Hi, I have a Win2000 Server with Microsoft SQL Server 2000 installed. Windows is SNMP-enabled, and I have no trouble seeing it on my servers view. It also recognizes the MSSQL port. But, how do I configure my server and/or OpManager to view the information about the database statistics? I've seen it as a feature on the web site, but don't know how to enable it.... thanks!
eval on Firewall Analyzer
Using Kiwi Syslog daemon to store Cisco Pix logs. I like what I see with your analyzer, but am getting no DNS resolution (intranet is configured) and can't seem to pull in more than 1 log at a time.
2 Items
1) I see in another post that I am supposed to be able to setup Exchange 2000 monitoring items under applications. I only see Exchange 5.5. Where are the Exchange 2000 items? 2) None of the WMI items appear to work properly. I have removed the SNMP items that are setup by default, and replaced them with WMI for processor, memory and disk. If I go to test, I get a tests OK message, and the graphs get updated. No further updates take place, the last polled is blank, and the next polling time is set
CPU Utilization monitoring - buglet?
I noticed that CPU monitoring only checks UCD-SNMP-MIB::ssCpuUser.0 but neglects to figure in UCD-SNMP-MIB::ssCpuSystem.0 (or UCD-SNMP-MIB::ssCpuIdle.0 for that matter). A server that has very high system CPU overhead will be graphed incorrectly in this case.
SNMP Trap Processors not capturing Trap Description from MIB
In order to make the notifications for Traps received understandable, I would like the notifications to focus on the "Trap Description" I would like in fact, to use the "Trap Description" in the subject line and exclude the OIDs. Here's an example from Trap Tests sent from an IBM Blade Center Management Module (BLADESPPALT-MIB) From OpManager "Load Traps from MIB" displays trap from above mib as: Trap Name__________ Description ibmMMTrapSysLogS___"System Alert: System Log 75% full." ... Trap notification
Data storage pattern
Hi, In a similar vein to this: http://forums.manageengine.com/forumHome.do?forumGroupId=49000000002007&forumTopicId=49000002654223 ...what are the data storage patterns for OpManager? many thanks, alec
importing tickets
Hello... we are trying to import all our old tickets from another database... it's possible for us to email these tickets to ServiceDesk, but the requestor name comes up as "test"... is there a way to change this?
FA (eval) stops running
Hello I'm evaluating FA since 15 days now. Two Fortinet Fortgate 50A firewalls send theire logs in Webtrends format to the FA. Last week FA stopped working. I was not able to start the FA service again. After I restarted the server, FA started again but all logged data seemed to be gone! Now since yesterday FA has stopped working again. I'm not able to start the service. The service starts and a few moments later it is stopped again, In the Event log I find a message: There were 5 failed launches
How To notify certain people about certain servers
That is basically it. We have a few managers that only care about certain servers, how do we get them notified about critical events on only those servers? Version 5.6. Thanks!
service monitoring problem on a server with two lancards
i face a problem to monitor a service on an windows machine (server) with two lancards. the monitored service communicates via the 2nd card, opmanager has discovered this server via lancard 1. The service is indicated as "down" in opmanager. is there anything i can do to handle this ? The service must communicate this way !
No Data from Cisco Router
We are evaluating NetFlow Analyzer and there is no data. "No Router is currently exporting Netflow packets to NetFlow Analyzer " We configured the Cisco 2620 to export the data to port 9996 on the machine we installed NetFlow Analyzer. We have a Firewall in between that we opened up port 9996 UDP from the router to NetFlow Analyzer. Does NetFlow Analyzer need other ports open on the firewall to receive the data.
Error adding licenses
Hi there, Currently I'm evaluating your fine product but I stumbled upon an error. I wanted to ad licenses for a software asset and get the msg: Failure: exception while adding licenses for the software. Please report the problem to the system administrator, with the error code - 1128495556343 Am I doing something wrong, or is this a known "feature" ? Can't wait for your next patch
Feature Request
I would like to be able to select a requester and see all the assets that are associated with that person. I would also like to be able to attach assts to that person from the requester screen. Also If a machine is added under inventory I would like for it to be automatically added as an asset instead of having to manually enter all the data in for the machine. At the least their should be a toggle to add it as an asset
Applications Manager 6.0.3 and Service Pack SP3 released
Hi, The latest service pack (SP3) for Applications Manager is available for download. Complete details on this service pack are available at : http://manageengine.adventnet.com/products/applications_manager/service-packs.html This would automatically upgrade you to Applications Manager 6.0.3 (Build No.6030). Major Enhancements include 1. Manager consoles to maintain SLAs 2. Standalone Enhanced URL Recorder 3. Support for Monitoring Microsoft Exchange Server 4. Support for Monitoring of FreeBSD Operating
FW Analyzer evaluation
I'm currently evaluating FW Analyzer and have some queries Firstly I'm experiencing the PIX IN/OUT traffic problem and have requested the patch but have not received it. I am also sending logs from a Watchguard VCLASS firewall to FW Analyzer. I can see event rules, protocols etc but none of the graphs contain any utilisation information, is this a known problem with this firewall? I have to reboot the FW Analyzer server at least once a day because the service appears to stop running, I am sending
Add notes to any device please!!
Hi I would love to be able to add notes to any device in the same way you can add notes to an alarm. This would allow the system to be used for change management (any changes could be logged as a note) Also, I would really like to be able to attach external files (or at least hyperlinks) so that device configurations, contract documents etc can be readily accessed from the device within OpManger. It would be good to extend the integration with ServcieDesk so that any device can be linked to any asset
Change title of servicedesk page
Is it possible to change the title: <title>AdventNet ManageEngine ServiceDesk Plus</title> into something else? I like to add my companyname thnx in advance
Custom Graphs using different SNMP Ports
I am trying to create a Custom Graph using another port besides 161. Checkpoint uses port 260 to access their enterprise mibs. I am able to get the value in MIB Browser because the parameter tab allows me to change the snmp port. I did not find this feature in the Custom Graphs window. Is there a workaround? Thanks, Jeff
Multiple SNMP Ports on a Device
Hi, I have two SNMP Agents running on a device - one on port 161 and the other on 165. I want to create Custom Monitors for the OID's exposed on each port. How do I do this? Thanks
OpManager Free Edition allows to manage 20 critical devices
Installing OpManager Free Edition allows you manage 20 critical devices in your network. I updated from OpManager build 5600 to 5601 (Free Edition) and the limit is always 10 devices... Is the free edition limited to 10 or 20 devices ? Thank you
Monitoring Websphere Network Deployment problems
Hello, I have some problems to monitor a WebSphere Network Deployment installation with global security activated. I was able to create a monitor for Websphere, but it always states that 'Resource is down', regardless of the real state of Websphere. Trying to add a custom attribute, the error 'java.lang.NoClassDefFoundError: com/ibm/jsse/IBMJSSEProvider' is displayed. System is: - AIX with WebSphere Network Deployment 5.1.1.6 and I also tried - AIX with WebSphere Network Deployment 5.0.2.4 Application
Next Page