Error Parsing MIBs without Newlines between IMPORTS
I've seen this with many vendor mibs like Genesys. If the import section has no newlines between the IMPORTS, an error occurs. Seems like only AdventNet has problems with this. Why? This will not work: IMPORTS enterprises, NetworkAddress, IpAddress, Counter, Gauge, TimeTicks FROM RFC1155-SMI But this will: IMPORTS enterprises, NetworkAddress, IpAddress,
Business View Problems
Hello, i made in Business view. How can i make the business view to full screen?? in the Business view i watch a computer. when i shut down the computer there businnes view make no update and sayy all is ok. when i click on the computer he says shut down. how get i an automatic update of the view? the service intervall is on 1 minute but no update. regards
GE UPS Monitoring
Has anyone managed to get GE UPS's monitored by OpManager? I've followed the guide at http://forums.manageengine.com/forumHome.do?forumGroupId=49000000002007&forumTopicId=49000002635835& , but I still get N/A or data not available in the graphs. I've attached the ups_monitors.xml file in case I've missed something fundamental!
Probe may be down/busy.Operation timed out
When I try to add Windows services to a specific server I constantly get "Probe may be down/busy.Operation timed out " I get this error when I am running on the Central Server or on the Probe itself. I can select one of the dozen or so "canned" services from the list and add them successfully. However if I get the above error and click OK or Cancel, it erases the previously saved service entries.
problem
i dont know what mean community please tell me what i have to write in that box
Comparison Professional, Premium und MSP Edition
Hi, i need to monitor some Server from Clients, i just found your software and sounds nice, what i didnt really understand is, the MSP Edition is the Premium Edition with some more addons, or the Professional Edition with some Addons. I need to monitor SQL-Server, Windows Server and Exchange. Everything is for diffrent customers.......and one more question....payment is only given in Dollar...I'am from Europe and would like to use Euro, is it possible?...so i can check what is the price in Euro!
Monitors not showing any data
Our monitors of our equipment stopped showing any data? Have tried supprt sites to no avail. Can not figure out how to get the data showing again. Opmanager 6.0 build 6005 is the version I am using. Thanks
Online Demo Temporarily Down
Hi, Due to unavoidable reasons, online demo of OpUtils is temporarily down. We regret the inconvenience caused. Thanks & regards, Ananth
Problem while restoring the Opmanager
Dear Support, I just installed OPmanager in a new machine to test the backup/restore process and found following errors in a "backup_file_name_error.txt" file. Please note that i have created a backup folder in Opmanager root folder and than run the restoredb.bat file in DOS mode. Need your support here. babrus@hotmail.com Yasir ******************************************* Backup File does't exist. Please verify the file name. java.lang.Exception: Backup does not exist at jdbc.RestoreBackup.deCompressData(RestoreBackup.java:993)
Dashboard dials not working
Hi there. We had a few servers successfully reporting fully to OpManager including the dashboard status dials, but after a backup and restore of the opmanager MSP server database, now one of the servers which is a DC doesn't show information in the dials. SNMP is configured with correct traps etc and hasn't changed since it was working, and you can go into any SNMP or WMI monitor on the server and it does show all current reporting values and even the Active Directory information is all being successfully
Reports Format
Hi: Can we print the OpManager reports in Excel format. Any help in this regard would be appreciated ? Thanks
Probe Hangs up
Hi folks,i have got the following problem. I use two machines (2003 Server). On one i have installed the central server and on the other one the probe. After generating the key (zip file) and after including it on the other machine (probe). I have got the problem that the probe always hangs (at the startup). The connection between these locations is with an ssh-tunnel. I have opend port 80,443 and the snmp. Finally someone can give me a hint
Probe hangs
Hi, i have got a problem. I have installed the central server in our network and the probem in one of our locations, outside. The connection to the probe is with an ssh-tunel. I followed the instructions and i have created an key and i have insered it (meanwhile the installation of the probe) After a reboot of both machines (central server & probe) i want to start the probe. But it hangs always or it seems to start, but the icon in the task is black and in 3-5 seconds you can't see it anymore.
Monitoring Status
I want to monitor the current status of hardware such as hard drives, ok, degraded, etc. but I can't find any way to do this. An example of what I want to monitor and subsequently send notices about if the status changes is the following: OID: .1.3.6.1.4.1.232.3.2.5.1.1.37 Type: Integer Enumerations 1:other 2:ok 3:degraded 4:failed
exchange database size
Is there any monitor to check total database size for each database store? I mean the total size of file.edb+file.stm (not only .edb file), so we can be alerted before it reaches 16gb limit for exchange server standard or 72Gb in exchange 2003 sp2. Sorry for my bad english.
Email notification from switch doesn't include user info
I have changed the "display name" from the default name, ie, fastethernet1, fastethernet2, etc to a more meaningful name but when I get the email error that a port is down, for instance, a user turns off his workstation, I only get the interface number, not the display name so it's impossible to know who or what was affected. I went under admin/snmp trap processors/trap name/link down/and selected "system name" and "system description" but this doesn't give me the display name. How is this resolved?
Has anyone used MSAccess to query OpManager DB
I have setup an ODBC DSN and can query using Excel. However, everytime I use MSAccess it crashes... What I'm trying to do is use MSAccess to create custom reports. Is this possible? Has anyone done this before?
Is it possible to generate reports in Excel or Word format?
Is it possible to generate reports in Excel or Word format instead of PDF?
Opmananger see if application is running
Hi, I have the following question. I would like to monitor if an application is running on a server, the application is not running as a service. Kind regards Stan Borden ANAL Plastics
Device Type Unknown and WMI monitors working
Hello, I am with the IT department with my company. Recently I have been tasked with trying to find a solution for our need for an Event Log / Syslog collections service as well as a system that can monitor each workstation and sever in our domain. OpManager seemed like the correct choice. However, I am experiencing problems getting it to work correctly. My problems are as follows: Upon entering the various subnets to be discovered, and waiting the appropriate time, OpManager discovers our workstations
Trouble messages in opmanager
Hello all, I got trouble messages from a few of our servers: AuthenticationFailure : .1.3.6.1.4.1.311.1.1.3.1.2 Servername Hardware: AMD64 Family 15 Model 5 Stepping 10 AT/AT COMPATIBLE - Software: Windows Version 5.2 (Build 3790 Multiprocessor) Why do I get this messages ? What can I do to prevent it ? Thanks a lot Regards Kai
can not connect to OPmanage webclient console
Hi, there: I've installed OP manage 6.0 on Win2003 R2 platform for one of my clients( they are licensed). I initially installed it as 30 day trial version then applied the license file. It was working fine for at least more than one month until recently my client told me that it's not working. When I use webclient I got this error message: "Internal Server Error The server encountered an internal error or misconfiguration and was unable to complete your request. Please contact the server administrator,
SMTP
The email portion of this product doesn't work. We have other monitoring tools that use the same configuration but the same config doesn't work with OpManager. What could be the likely cause? Theo
Need location of archive of older versions of Opmanager
I need the location of the web archives of the older installation of Opmanager. I need to migrate to newer hardware, and I do not want to upgrade our current version till we move over to the need hardware. I need the location of the files for build number 6003. Kindly do the needful and provide the location of the files on the web.
(Un)Ability to copy/adjust/use custom monitor
Hi all, I've run into a very annoying and inconvenient problem. A short while ago OpManager Support helped me out with some custom monitors. These are to monitor AKCP Environmental SensorProbes (and if I succeed to copy-adjust-use in another way for Powerware UPS's). My problem first is about the AKCP-probes. With OpManager-support help we created custom monitors, added them to devices and started gathering data from these probes. So far, so good. Then I tweaked the custom monitoring with thresholds.
Telnet CLI logging or debug mode
I have tried adding a new CLI Telnet monitor but all I get is "This monitor did not respond to the test request". I have added it per the instructions in keven's post and the KB article. The username and password are correct as I can see on the remote system that opmanager is authenticating correctly. Where or how can I see the output of the command line session to ensure opmanager is parsing it correctly? How would I turn on CLI debug to get more troubleshooting information?
Disable Probe Showing on windows login
Hi there. When a probe is installed on a customers server, when the ManageEngine Probe service is started and then the customer logs in, the OpManager software window appears, loads the little green icon in the taskbar, then auto opens up a webpage to the local probes web interface. We do not want this happing when our customers log in to their servers, as we don't want them trying to get into their local probe interface or to constantly see the software running, we wish it to be a silent monitoring
Notification profile not shown
Hi, I have this problem... New created notification profiles are not shown on the notification profile window, nor when assignign them to computers. If I try to recreate the same notification profile (the same name) OpManager says that it already exists. Note: In the EventAlertFilter table (SQL) the new created profiles do not appear. The ones created several days ago do. Nothing changes on OpManager, that I'm aware of. Need help on this. Thanks and best regards. Rodrigo.
For myk12pak
Hi myk12pak I couldn't seem to add to the last post so I've added this one just to explain gfor you how I managed to achieve it. I just added the CPQIDA-MIB file into the /mibs folder on both the central server and probe, edited the /conf/mibtobeloaded.conf file to specify the mibs to be loaded on startup. I found I also needed to add cpqhost-mib file as the ida file said it relied on it. (I got the mib files from assure24 website) http://www.assure24.com/databases/snmp-mib/private/Compaq/ Then I
Read memory usage from vmware ESX 2.5.x, result in %
Hi.. i'm trying to make a resource monitor reading the memory usage from vmware ESX server 2.5.x, i can read the installed memoty in the server and available memory, and thought that from this i maby could do something like this.. to get a percentage value, to show tha same gauge as all other servers.. </DEFAULTGRAPH> <DEFAULTGRAPH Name="Esx-MemoryUtilization"> <YAXISTEXT>Percentage</YAXISTEXT> <DISPLAYNAME>ESX Memory Utilization</DISPLAYNAME> <name>EsxMemoryUtilization</name> <Vendor>SNMP</Vendor>
Symantec Backup Exec
Has anyone setup a custom monitor for Symantec Backup Exec? I a new to this product (Op Manager that is), and I am a little unsure how to accomplish this! Any help would eb appreciated.
WMI Not Working
Greetings, I am evaluating OpManager and am struggling to get my domain controller monitored properly. I have SNMP working and can see AD status on the dashboard (for example, which FSMO roles this particular DC has). However, none of the LSASS/WMI monitors work (CPU, Disk, etc..). They all show last polled as N/A and if I run a test I get the error that the monitor failed to respond. I have tested the credentials and know for certain they are correct. I have already checked the server AND run one
Re: OpUtils 4
I installed the trail version of OpUtils4 and import all my Cisco 2950 Switches and seem likes it recongize all the Switches. But the only on been monitor as the Network Bandwidth, the other switches are show no data. Please help Thanks Tommy Tommy Pham
accessing opmanager DB very slow
I'm using Opmanager6 to monitor 20 routers,500 switches & 100 servers. The machine that OPman runs on is a P4 3Ghz with 2GB RAM, accessing top 10 switch ports and other reports can take nearly 700secs to complete. is this because the box is underpowered or OPman is not designed to monitor nearly 10000 ports. I'm going to move the installation to a new Dell server (Dual core 2.33Ghz, 2GB RAM, 36GB 15000rpm SAS drives) should I get an improvement in performance or spilt the monitoring across multiple
SNMP on Cisco Catalyst
We used the demo version of Opmanager where all traps were working fine. On purchasing Opmanager we installed a new server to run the software and since then I can see the ports on the switches but no monitors work. When I test the monitor it responds with : The Monitor did not respond to the test request The SNMP host is configured correctly on the switches, at this point ALL traps have been enabled and the community strings are correct. Any idea's as to how I can get this up and running?
Email based sms not working
We are using OpManager 6.0 Build 6011 on a Windows 2003 Standard Server SP1 and actual patches. We would like to send an email based sms (using Lotus Domino) for alarm escalation to a Vodafone Blackberry. When I try to send a test message from the "Mail server settings" page, I recieve an sms on this device. When I try to generate an alarm i.e. stopping a service with the notification profile assigned, no sms is recieved. In the mail server routing protocolls I can see that this email has been send
event log monitoring
I am trying to set up event log monitoring in MSP edition of Opmanager. WMI seems to be working correctly as I get some performance metrics through it. I have set up the event log rule to monitor for Any Application failure , and I am not getting any results, even though there are application failures logged into the event log. thanks
UPS - MATRIX
I have a question regardin UPS that has SMNP functionality but it is conected via Serial Cable to a Windows 2003 Svr. This server is currently managed by OpenManager, but i can not found how to trap the information of the UPS. The UPS is a Matrix 5000. Thanks,
Notification profiles changed
Hi! We just applied the latest service pack to OPManager and it looks like the notification schema was changed. Previously we could configure Alarm filters for every Notification profile and for every machine separately. Now this option disappeared from Notification profiles. Is it right? Can we get it back?
HP RAID monitoring
I need some handholding getting a custom monitor created to monitor an HP Proliant server's physical drives. I've looked at the thread in http://forums.manageengine.com/forumHome.do?forumGroupId=49000000002007&forumTopicId=49000002637781 and have loaded the CPQIDA MIB. It's now time to select a limb on the tree, and I am at a loss. How do I translate the abbreviated names and which one do I select to monitor the drives?
Next Page