Create Custom Monitor Report Schedule
Hello Is it possible to create schedule reports of custom monitors? If yes, how should I do it? Thanks!
how to add non snmp devices
Hello, Kindly advice how will iadd Non SNMP enabled devices in Opmanager 6.0 Regards, Asim
Problem starting probe
Hi, When i want to start the Probe (on linux) i get the following error " Probe build number 6001 is not compatible with the central server build number 6000. Hence shutting down the probe". The central server is on windows and the build level is 6001 and not 6000. The build level of the probe is 6001. Thanks, Emti
Null interface
1) When locking @ the router view it shows a Null interface, but I have no Null configured. I do have a dialer interface and could this be it? 2) Can i delete some of the interfaces if we are not using them in the large map view?
Changing Interface Speed for Utilization Calculation
How can I change interface ifspeed response when routers were configured to different bandwidths? For example;interface is 128k but "bandwidth 256" command were applied to router. Therefore, ifspeed response is 256k. I need a solution to change interface speed that used in utilization calculations(ifspeed). I've also changed interface speed that seen on gui by using mysql commands. Creating custom monitors may solve this problem but creating and applying custom monitors for every interface seems
Incorrect IP address
OPManger is currently showing the incorrect IP address associated with an interface on my Cisco router. Is there a way to correct this?
op manager free edition
I downloaded OpManager free edition and it doesn't do anything. What gives? Can anyone help me out here? Thanks! :D
AD lsass cpu monitor above 100%
We just bought Opmanager and we are running into a problem in the Domain controller panel. The LSASS process shows more then 100% cpu usage. Even up to 1300%. When I monitor on the system itself it does only become more then 1% some of the time.
dynamic link on the GUI
Hello all, I would like to have a dynamic link via the web interface. In the Device Details, we can "add more details" and I would like to add a link to a website concerning some of my servers. I want to be redirected to the web page just by clicking on the adress. It is not possible to do it by configuration. But can I access some html pages in OpManager directory concerning these edit fields in order to transform it to a web link by simply adding an html <a href> </href> syntax ? S.
Error adding custom device type
I am trying to add a custom device type for a Raritan Dominion KX KVM-over-IP switch. Its System Description OID is .1.3.6.1.4.1.8072.3.2.10. However, I get the following error: Already a Device Type is present for this OID I see that device type Linux has the more generic OID .1.3.6.1.4.1.8072.3.2. Is that what's preventing me from adding the more specific device OID? The KVM switch is based on a Linux kernel which is why it shares the same major OID, but shouldn't I be able to add a more specific
Problem with SMTP Email - Notifications
After removing "Anonymous" access to our SMTP server, for security reasons, OpManager is unable to send notifications. I gave it a username and email account on our Exchange server, so it should be able to authenticate to the SMTP server as a user. When I try to send a test message, the error returned is: 454 5.7.3 Client does not have permission to submit mail to this server. The error above is received when the Exchange server's SMTP virtual server is set to accept "Integrated Windows Authentication"
Integrate several ManageEngine systems to one url
Hi. I'm currently evaluating some of ManageEngines products and is trying to merge them together to one url, well not really one url but like this: http://hostname/opmanager http://hostname/servicedesk etc. Has someone done this before and is able to share the configurations for this?
OpManager server on Windows and MySQL db on Linux
Hello everybody, I would like to install OpManager on a Windows plateform but also to have its mysql database on a Linux server. Currently, the mysql database is on Windows. Does OpManager supports this ? Have I to install a MySQL server on the remote machine and only change the url in the database_params.conf file ? Currently, the url in this file is url jdbc:mysql://localhost:13306/OpManagerDB AppModules TopoDB-MapDB-EventDB-AlertDB-PollDB-PolicyDB-USERSTORAGEDB. Changing only the adress will feed
Remove Resource monitors from all server
Is there a way to remove a resource monitor from all servers, just like you can add it to all servers ?
Dual Processor showing up as 4 CPUs when monitoring via VMI
I have a Dell Poweredge Dual XEON server running 2003. When I us the CPU Utilization with the monitor type of WMI it shows as if there are 4 CPU's on the detail graph and tables. It shows CPU0, CPU1, CPU2, CPU3. And each have values... granted many times it is 0, but each one at some point does show values as if it is really tracking utilization. If I choose CPU Utilization with monitor type of SNMP then it just acts like there is just one. Why am I seeing the 4? I also see these on several other
Monitoring Backup Interfaces (down at normal conditions)
Is there any solution for monitoring backup lines that are normally at down state. I want to get notification only when the backup line is at up state.
Business View not showing up for user
1) I have created a business view. 2) I then created a user with read rights and checked the box referencing the business view I created in step one. 3) I can see the view in the web client with the administrator. 4) I CANNOT see anything when I sign in as this new user. Nothing at all. Just the tabs across the top of the screen. What am I missing? It is as this user does not have access to anything.
Funcionality Request
It would be nice to be able to reboot a server or group of servers from OpManager. Thanks -Jeff
Monitoring temperature on IBM servers
Hi I am trying to monitor temperature on our IBM server and have tried adding the vendor specific monitor for our x series server without any success. Using the Test Monitor button on the Monitor Properties page results in a Monitor did not respond error. We have installed the latest IBM agents on the x series 236 server.......any clues on how to troubleshhot this issue. Jim
MIB Browser
Using Costom Monitor I load Custom SNMP OIDs. I want to get the value of a specific variable. As I set the OID to monitor, I try to test the new monitor and I find the given OID has a .0 suffix , so differing from the given. In that way the get fails. Do I need more info? Or there is something not acting in the propre way?
Adding Telnet or SSH link on Snapshot Page
Is there a way in OpManager to add an option on the snapshot page of a router to telnet or SSH to the router? Thanks
Services
I'm evaluating OpManager 5 and so far I really like it. However, there seem to be a few problems: 1. FreeBSD and Win2k servers could not be set to monitor POP3 service. 2. Win2k3 server can only be set to monitor SMTP service. Could anyone tell me how to solve these problems? Thank you very much.
Infrastructure categories adding
Adding and removing an infrastructure category would be very handy when using the opmanger in a lab environment. Now there is no way to indicate traffic generators, probes etc. as they don't belong with any of the existing ones now.
Troubles testing email notification
Hello all, I'm having difficulties with an email notification.. I've recently made a little adjustment within that email notification, but.. I'm at a loss where on Earth I can find a way to test the new settings.. :( Since it's a pretty specific one with a clear status of notification (send to an emailadress that's actually forwarded as SMS to a GSM) it's pretty usefull if I could find the place to test it... The subject is configured to show the following: $message $displayName $stringseverity which
Monitoring Traffic Statistics
I have a question regarding traffic statistics like errors, discards, tx, rx, utilization and so forth. When it asks for utilization on a 15 minute window is it getting the utilization at that EXACT moment or is the snmp returning the average over the last 15 minutes. What about for errors. The default time window is 60 minutes. Is it grabbing the errors accumulated over the last 60 minutes? When it grabs it does it reset it back to 0? Basically I am trying to understand what is being returned, are
OpManager MSP and SD+ related questions
Hi all. We are running SD+ quite happily (even though we have multiple clients we chose SD+ over SC) 1 Can we run SD+ and OM MSP on the same server? 2 What is the running over head for MSP? I know the min specs but I am trying to see if we can put OM central on an SBS2003 server for example. 3 Is the overhead the same for the probe servers as well? I am trying to work out if a client will notice degradation of the server performance. 4 re the ports, if port 443 is already being used what are others
Test an alert
After I setup my notification profiles and such, is there a way to test what will happen without phsyically bringing down a server? I figure there must be some sort of test facility that I am just missing. Thanks.
Port Interface Down Switches
We are currently getting messages about switch ports which seem to be people simply turning off their computer or disconnecting their laptop and packing up. These messages are currently filling up our home page on opmanager as we have lots of switches. Is there a way to change the threshold or disable these messages in particular from showing up on the main page.
TFTP service monitoring
TFTP monitoring doesn't seem to work. Is this because the protocol is UDP??? Cheers
what is the difference between Opmanager 5.5 and 6.0 version
We are using the Opmanager 5.5 free version and wanna to know what is the difference between 5.5 and 6.0's free version. Thank you very much.
Home page is half-blank
This is what our home page looks like. I added a SNMP CPU monitor on a server yesterday, and afterwards this is what I got. When I clicked on a device, it would come back saying it couldn't find the device. I then restarted OpManager and it would come up with a BE error when I tried to log in. I ran the repairDB.bat command like I saw in another post. Everything else seems to work OK, but the front page is still messed up. Any ideas on what to run / re-install / etc. I'm running version 6, but not
Enhancement Request - Suspend Notifications for Device
Hi I would like to suggest an enhancement for opmanager, to add a button to suspend all notifications for a device. Currently, if a device is flapping (eg a wan link bouncing) then opmanager will generate tonnes of emails alerting us to the fact. Once you know a device is down or flapping, you typically dont want an email every time it bounces, but you also want to be able to capture the device outages so you can gather availability, MTBF and MTTR. Currently, the only way to stop the torrent of emails
Reset Password
I cannot get into opmanager for some reason. I'm using the username and password I previously was using...
Service down
Hi, There is a device which gives an alarm as smtp service is down. After that the service was up, the status of the device remain service down. how can i solve this? Emti
Categories - More?
I need to be able to create custom categories/views so I can place devices where I need them for better management. Is there a way to do this? Thanks
Opmanager problems/questions
Hello support, we are running opmanager 6(build 6005) on a XP SP2, P4 3.2 ghz and a 1gig of ram. But we are experiencing some difficulties and have some questions: - We have SNMP enable devices and able to see the memory and disk utilization dial graphs. We cannot see it for Cpu utilization, why? - Can we display values instead of percentages. example, 1gb of memory being used out of 2gb instead of 50%. - Can we have multiple threshold setup on monitors. example, if a application in windows using
MySQL vs MSSQL
Hi, I was just wondering if there are any performance benefits to moving to MSSQL from the standard MYSQL? Currently my MYSQL dbase is sitting at just over 3gb and running a bit slow. Page load times are in the 30-60 seconds mark. Would moving to MSSQL improve performance? thanks, Matt.
Unmanage devices
I need help on how-to unmanage all my desktop devices. I have over 1,000 desktop devices that currently needs to be set to unmanaged. Please assist. Thank you!!
SNMP or WMI on 2003 Servers
Which monitoring type should I be using. I have a choice of SNMP and WMI when dealing with my 2003 servers (non DC's). What is the preferred type? I also notice sometimes the SNMP vs the WMI values show quite a difference in each other for the same monitoring. Why is that? Thank you.
Services on routers
It seems not possible to add services to routers. They also have telnet, ftp, tftp, ssh .... etc.
Next Page