Windows Updates Attention
Hi All We are running Opmanager build 8812. I Would like the opmanager to create an Attention/alart event, when a windows server (Windows 2008 R2) is having updates pending install, so the resposible administrator for that server can shedule and install the updates pending... Sometimes we are not seeing that servers has updates pending before we logon to the server to do some other task.. Regards, Steffen.
NCM and Netflow plugin cause OpManager crashed
Hi all, Our Opmanager suffer a problem after NCM and Netflow plugin installed. 1. After the 2 plugin installed according the install instruction, the Opmanager cannot login that popup message"Oops looks like a few tables got corrupted. Don't worry.. Run RepairDB.bat from bin directory and restart the server" 2. We reboot the Opmanager server and run RepairDB.bat. After batch file running finished, the Opmanager still cannot login same as above. 3. We uninstalled the 2 plugin and reboot the server
OpsMan 9 - Virtualization Question- Changing Catagories
So've Ive upgraded to v9 and have a question about the new Virtualization part. I have 33 HyperV server and when I go to change their catagory from Server to VirtualDevice I get a popup: " The Device Catagory Cannot be changed to Virtual Device, if not discovered as a VirtualDevice"... Since I have 33 hosts I want to move into this new catagory I need away to do it other then deleting and then redoing them if possible... Anyone found the trick? I'd hate to have to set these all up again. Would
Send alert after X minutes
Hello, Running 8723, is it possible to send an alert if RAM stays higher than 90% for 10 minutes? Thanks.
Monitor DNS lookups
Is there a way OpManager can alert if a DNS lookup fails? For example, if nslookup/dig cant resolve a host, an email alert would be sent off. Thanks.
Event ID 624 monitoring
We are monitoring event 642 on our DCs for disable accounts for audit reasons and it works very well. However, when we try to fire off an event on ID 624 for account creation, we never see alarm or an email stating the condition was met. The event log rule is only set to look for the event id but have tried a combination of options in the rule to try and get it to work.
Opmanager 9 enterprise for windows
Hi we just recieved a licence renewal from you guys, we had version 8 and upgraded to 9 with our licence before upgrading to version 9. In summary when we installed verion 9 with new license normal standalone 64 bitversion, we could not add more that 500 devices on opmanager for monitoring. we were advised to opt for enterprise version. I downlaoded both probe and central on enterprise version 9 64 bit for windows and installed it on my server but I am unable to get the most recent lisence on Probe
Alarm - clear delete
Hi, im new to Opmanager. The test system is up and runnig with snmp, syslog, NTlogs, escalations and so on. But I am not shure about the alarm clear and delete buttons. Whats the difference? I didn' find it in the manuals. If I clear one Alarm, this type of alarm will never show up again? Can I reactivate this type of alarm? It seems i pressed the clear button for many alarms during initial configuration ... Thanks in advance Thorsten
OpManager does not start after a reboot..
Whenever I reboot my server (for patches or maintenance) OpManager and NetFlow Plugin never start up automatcially. I've had this issue and submitted numerous tickets on it but it never gets 100% fixed.. The service just keeps crashing and keeps repeatedly trying to start.. What I have to do is go into services and stop the service (stop it from trying to start over and over).. I then go into taskmgr and kill: jqs.exe, jucheck.exe, jusched.exe, and mysqld-nt.exe. I then go back to services and start
There is some wrong with the URL?
There are some questions on OpManager 9000(build 8812)+NFA plug-in 9000: 1、 The problem of URL. When opening the interfaces on OPM, we click some application, and then it will turn into the NFA-plugin, but it is shown no data. 2、The customer want to have a report that includes device additional info and interface additional info in one report. Can the OPM do that? Thanks !!!
RIELLO UPS - NETMAN 102 & 202
Hi I am trying to find out if anyone has successfully created monitors for the UPS combination (RIELLO rack mount UPS with NETMAN 102 and NETMAN 202 SNMP/Network cards installed? Further to this does anybody have working MIB files for the above combination? I am trying to setup monitoring for my UPS devices and would love some help with everything from creating the NEW device, to creating new monitors to setting the appropriate thresholds etc. there is not any templates for this product. Op manager
Monitoring 64-bit Counters with SNMP
I am using OpManager 8 to monitor the spare disk space on an Isilon cluster. The number of free blocks is represented as a 64-bit counter. I can read the counter in MIB Browser by setting the version of SNMP to v2c. I have tried to add a monitor to OpManager to monitor this counter but the monitor returns zero. I assume this is because OpManager is using SNMP v1 queries. How can I force OpManager to use SNMP v2c queries with this device? Can I do this within a Device Template?
OpManager v9 upgrade - when will it be available?
OpManager v9 was released Nov 11th to much fanfare, but the actual upgrade/service pack to move to v8 has yet to appear. I've filled out the "form" on the service pack download page, but just got back this: ---------------- We have received your service pack request to upgrade to the latest version of OpManager. The service pack PPM will be emailed to you before this month end. This short delay is due to a breakage identified just before the official launch, which is getting fixed right now. We
OpManager – issuing recursive alarms on 4 ISDN links on 2 routers.
Hi – I just inherited an installation of OpManager. There are 109 routers being monitored, and 2 of them are issuing recursive alarms on two of their ISDN interfaces. The alarms are: Interface 'BRI0/1/0-Physical-BR0/1/0' is down. These alarms occur regularly all day, every day about every 3-10 minutes. But, When I drill down into the interface display using OpManager, the interfaces show 100% availability. The routers have identical configurations: Router 1 interfaces: BRI0/0/0-BR0/0/0
trying to load cpqrack.mib error message
Error occured during the MIB parsing. The eError occured during the MIB parsing.
Support service complaint
Dear Sir/Madam, My name is Surapong Termphantunun who works for Bridge Business College which is in Sydney, Australia. I am using your trial network monitoring software which is OpManager. Today, I am writing to complain that I have been waiting your reply email which is about OpManager software for a week. I expect to complete setting up and configuring the software as soon as possible, but I still have a difficult setup with my production. I sent a couple of emails to find out what to configure
Availability Reporting
Does OpManager monitor just the network links or does it use all the thresholds for services / processes when calculating availability? If a monitored service is down then my manufacturing operation is down and that is a “hit” against my system availability.
OpManager - ServiceDesk Plus Integration not working
I am trying to integrate the OpManager to ServiceDesk Plus. Both are running fine on there own but when I go to Add-In setup and run a test, it does not connect. I have double/tripled checked settings and they are correct. I am running Op V 9000 and SDP 8015. I'm not sure if this is creating an issue since I can't find anywhere which tells me which versions are compatible.
Why does the CPU always show at 100%?
I have one of my Citrix server running Windows Server 2003 R2 w/ SP2, it has 2 Quad Core processors, and when monitoring CPU Utilization it is always recording all 8 cores at 100% but the server barely reaches 10%. I am using WMI montioring, and it works one all the other 30 servers I have but this one it continues to report 100%. All the other montiors for the server are accurate, any suggestions?
CPU utilization 100% on opmanager
I would like to ask what could be the reason why my opmanager monitoring display 100 CPU utilization while upon checking the server. Its actual CPU usage is less than 10 percent.? TIA
OPManager License
Hi, Can i purchase license for an unlicensed OPManager pro 8? Regards, Van
No WMI credentials are working for terminal server
Hello, I are in the process of setting up additional monitoring with OpManager 8 (build 8812) and have run across an issue with getting any WMI credentials to work with a Windows 2003 Terminal server. This server is on our domain, and with the exception of the Terminal Services software running on it is the same as every other Windows server we have in our environment. I have logged in using a couple of different credential sets directly onto the hardware, so I know that the credentials work,
Importing devices via CSV does NOT work
Hello, I tried bulk importing devices via CSV and while it successfully discovered the correct IPs of devices, and said successful, the devices did not import. If I manually import them IP it does work. I am not even close to my licensed device limit. Thanks -Marty-
Monitor credential access
I set the credentional settings cli and Snmp for monitoring multiple Serer. Everything works. But if suddenly one of the servers is no longer authenticate the user on ssh or not answer snmp reqest, the values of performance counters are 0. But server is aviable becouse ping is OK. How to set up so that if credentional access no longer work, I issued an alert about this?
Cannot open OpManager from windows 7 machine
Our IT director is running a Lenovo laptop with windows 7 professional 32-bit OS and Internet Explorer 8. Whenever she tries to access the opmanager web interface she receives an error stating that the browser needs to be higher than internet explorer 6, but she is running version 8. Has anyone come across a problem like this? If so, how did it get resolved? Thank you.
dashboard not showing
Hi, I have added a few exchange and MSSQL machines to opmanager and none of them show their respective dashboards. Now I found out I can delete the exchange machine and add it again under servers with the option 'add exchange devices'. This works, I can delete my other exchange machine and add this one as well. However I would much prefer to just enable the dashboard so I won't lose my data. And there is no such option to add a 'MSSQL device', so I don't see the mssql dashboard at all, how do I get
OpManager alert on process
Can OpManager monitor for a particular windows process on a server/client? For instance, if I wanted to be notified when a particular windows process was kicked off, can it alert me?
How I can monitor the URL from host?
Hi, Problem - if I want to monitor URL from host, polling URL goes from the OpManager server. How to make this check from the host? (For Ex. from windows machine, which is added in system)
CCTV views
Dear All, I would like to display a CCTV Views on an External monitor. The software provide me to set up an URL. When i add the one of my Opmanager server, i've to write the log in information like user and pwd. Is it a way to enter directly the CCTV view URL without to enter user and pwd? thanks for your help. Julien
OP Manager
Hi We are currently trialling this product with a view to purchasing if it provides us with the type of monitoring we require? We currently have 14 servers in several locations connected via VPN and have installed OP Manager onto one central server for the purpose of monitoring various events on the servers. We currently have 3 servers which although look to be available and 'polled' they are not showing CPU, Memory or Disk Utilization in the Dashboard? Any advice or guidance would be gratefully
Customize Opmanager Report
Is there any possibility to Add Notes field on System down time report after every alert
Custom Query joining SnmpInterface and Alert tables
Can you give me an example of a query joining the Alert and SnmpInterface tables? I need to report on IFCIRCUITID and IFALIAS for Discard or Error alerts.
getting alarm propertis for invoke chassis view(nar file)
please see this code in events browser for invoke nar file: <MENU-ITEM action_type="openframe" action_value="com.nrdc.bts.chassis.btsChassis? MS_HOST=localhost&HOST=${name}&CLIENT_SERVER=TCP& ;PORT=${snmpport}&URLPREFIX=./&MS_MODE=3& ManagedObjectName=${node}&MS_PORT=9001& CLIENT_CLASS_NAME=com.adventnet.nms.client.ms.MSClientTransporter& XMLFILENAME=btsChassis.xml&CONFIG_CLIENT_IMPL=com.adventnet.nms.config.NmsConfigClient"
OWA monitoring (w/logon test)
http://www.manageengine.com/network-monitoring/howto_demos/url_monitor/demo.html Is not clear for examples of testing to make sure logging into a OWA URL completes. Can you please provide specific example of URL test configuration of testing OWA URL?
Unable to add device
We are unable to add devices in opmanager
After remove monitor with "the interface down" on a device ,but it still alert when interface down!
After remove monitor with "the interface down" on a device ,but it still alert when interface down! How can I slove the issue? Thanks.
SSH : is it possible to replace expect "legacy" login with SSH key sign in ?
At our shop we have several Linux boxes on which I would like to implement check through SSH. At present I am not satasfied at all with the CLI monitoring. SSH key sign in is so easy and robust, I fear the present solution in opmanager is unstable and risky towards security and a simple prompt change. Any tips on this ?
Active Directory user authentication
It would be much better to be able to log in to Op Manager using our AD credentials rather than local Op Manager authentication.
ISDN MONITORING
Hello friends, I have one query about ISDN , i have cisco 7500 router where have severl isdn links configure..i am monitoring this router using OPMANAGER . Now in general all my isdn links are down i use it as backup whenever framrealy goes down it comes up. i dont want OPMANAGER send me mails whenever it poll all isdn down interfaces... I want whenever isdn link comes up opmanger send me mail....can anybody guide me how can i configure this trap...using ciscoisdn.mib i can see status of the links.
Real Time Traffic Glitch - CCTV
I have 5 real time traffic Graphs in a CCTV View. Since Upgrading to the 9000 build, the real time graphs will flicker really bad. I have changed the refresh times and everything. Any suggestions? Happens in Firefox and IE
Next Page