Moving Away from AdventNet?
I've purchased licenses for OpManager, ServiceDesk, OpUtils, and Firewall Analyzer. I've renewed these regularly and even used Site24x7. You can't beat AdventNet on price - nor usually on features. But I am extremely frustrated by one aspect of AdventNet which has to change - or will result in myself discontinuing utilization of the companies' products. Namely, when a critical problem with the software is discovered it needs to be rectified immediately - not wait two or three months for a hotfix.
Switch Port Mapper
On our switches it only shows the ports that have a device plugged into it. It does not show any of the open ports. I am evaluating the product and I cannot justify buying it if this does not work. Thanks, Steve Mize stevemize
SQL services not running with anti-virus turned on
I'm curious if anyone has had issues running their OpManager server with SQL and an anti-virus program. We recently installed nod32 anti-virus and soon after had problems with SQL services not starting up. This sounds like a nod32 problem but I thought I'd throw this out in case anyone had a similar issue. Thanks, Alex
Adding New Monitor for Riverstone
Hi!! I�m trying to add a new monitor for Riverstone.. I go to device templates--->Device templates ---I select my Device templates(RIverstone)----->Add Monitor----->New Monitor...In New monitor window I try to search for Riverstone MIB, Bbut I don found them... So I go to the server and search for the Mib�s folder.. [root@localhost mibs]# pwd /opt/AdventNet/ME/OpManager/mibs There I want to create the MIB that I need rsCapCPUCurrentUtilization60Sec TABULAR read-only Unsigned32 ( 0..100 ) 1.3.6.1.4.1.5567.2.270.5.1.1.3
Configuration Archive
Is it possible to have the Cisco configuration backup retain more than a single backup of the startup and running configurations? It would be very nice to schedule a backup every 24 hours and have the display show each backup instead of it overwriting the previous backup. Also, is it possible in the Bandwidth Manager to write in a description for the interface being monitoring instead of just having the interface name? Finally, can the unit of measure be changed in the Bandwidth Monitor to use kbps
Custom tool to report firmware version
Forgive me if this is an ignorant question but I have a requirement to gather firmware versions from all my servers (Windows, Linux and Solaris). Would it be possible to use the custom tools feature to do this? I am not familiar enough with snmp to know. It doesn't seem to show it in the server monitoring system snapshot.
WMI fails on Windows 2003
I'd just like to share this with you. I've been having problems with WMI failures on some servers but not others. After troubleshooting this with Jason in the OpManager team we found that the reverse DNS was incorrect. After correcting the PTR record WMI was fine. Example Forward DNS Server name: w2k3-server1 IP: 172.16.2.1 Reverse DNS 1.2.16.172.in-addr.arpa Name: w2k3-server2 * * The reverse DNS should resolve to w2k3-server1. To correct this delete the incorrect PTR record Run ipconfig /registerdns
devices disappear
I'm having a weird issue. When I add a new device, it doesn't always map to the correct device type. So, when I go and change the device type, the device simply disappears. I got so sick of it that I blew away my OpManager install over the weekend and started from scratch. Same thing. Anybody else seen this?
Creating Reports
How can i convert my reports to other format (e.g. excel) so i can have it presented in different graph type. When you do Custom Reports it only shows you the graphs, it does not show the details.. Please suggest some techniques or procedures how to get detailed reports on the monitored devices. Hope you can help us on this. Thanks..
OpManager MSP: Issue with Inventory
Hello there! Whenever i try to see the Inventory section on the Central server the following error is generated: Unable to connect to the OpManager Security Service. Possible Reasons : The given/available NAT_NAME(sccm.ExchangeLabs.net) & NAT_PORT(6565) for the probe may be wrong. Firewall configuration might not be done in the probe LAN. Probe May be Down. Internet Connection may be poor.Connection might have timed out. Security/Inventory module possibly not started in probe.Make sure you have applied
HOTFIX 7025
I am trying to apply hotfix 7025 and it's stuck at 98% complete. I just called into support and was told the one person who does support has gone home!!! WTF?!?!?!?!?!?!?!?!?!?!?!?! Support for OpManager really sucks. thanks for taking our money.
upgrade to 7 from 6 failed
I upgraded to version 7 and logged in, all the data was there, i then applied the latest hotfix (7025) and restarted. I now get this message Oops looks like a few tables got corrupted. Don't worry.. Run RepairDB.bat from bin directory and restart the server I have done this as asked but it doesnt matter. I still cannot log in
Linux server monitoring?
Hi, Using OpManager, is it possible to monitor linux boxes? I'm very impressed with the presentation and features of OpManager for our windows boxes, but in order to compete with our current solution (zabbix) it needs to be able to monitor linux boxes to (monitor services, memory usage, performance etc). Can this be done ? Olly
UPS monitoring
I have a MGE Galaxy 3000 UPS. There is no device template in OpManager so I loaded the MIB and made on myself. How do I get the UPS load and status to show up in the pictures on the top half like they do with an APC UPS?
OpManager 7 startup problems
Windows XP Pro sp2 / OpManager 7 (d/l 16feb08 installed as free version) Hi, I would have posted here, but the thread seems to be abandoned. The "ManageEngine OpManager" and "ManageEngineOpManagerApache" services appear to start ok, see screenshot 1 and screenshot 2, but the "ManageEngine OpManager" service stops after screenshot 2. I have tried several possible solutions suggested in the forums without success. Any advice or suggestions please? Thanks, Mark.
Switch Port Mapper
I am using OpUtils Build 4409. I have several switches mapped that return information on only a fraction of the ports. For example I have a Cisco 2950G that shows I have 2 ports used and the rest are listed as open or transient. I know for a fact that this is incorrect. There are at least 2 dozen devices connected to that switch.
Domino Server
Do you have monitors for Domino Servers? Thanks..
CLI - CPU Utilization question
Please see the below picture, basically my dial for cpu utilization is showing -1%. What can I put in my host-resource.xml or opmanager_snapshot_dial.xml to correct the issue? This box has 4 cpu's My output for top b n 1 | grep 'CPU[0-9]* states:' CPU0 states: 6.0% user, 1.0% system, 0.0% nice, 92.1% idle CPU1 states: 5.1% user, 1.0% system, 0.0% nice, 93.0% idle CPU2 states: 1.1% user, 58.0% system, 0.0% nice, 40.0% idle CPU3 states: 9.1% user, 1.0% system, 0.0% nice, 89.0% idle top b n 1 | grep
Loss of views and Alarms graph
All business and infrastructure views are missing and cannot create new views. The alarms graph is also missing from the Home tab. This is version 7025 and repairdb runs without errors.
Problem adding network interfaces
Hi, I've installed Opmanager 7 BN 7025. My servers have 3 network interfaces (external,internal,backup). When i discover the interfaces , opmanager shows 3 interfaces, but when i add all the interfaces, only two are added successfully (external and backup). How can I solve this problem? thanks.
problem with mail server setting and availability statistic
hello* I m a big problem I don't use mail server setting because when i send a test message An error appears Impossible to connect it to the mail server Verify that the service of messaging is active on the specified port and i use the port Smtp 25 and i an other problem with the availability statistic OpManager does not post(show) any more the Availability for today Please I need help
Error in SNMP monitoring for interface Tunnel on CISCO
I have error in SNMP statistic for interface type Tunnel on CISCO 3750. In attachments graphic for OpManager and other software for last 24 hours. For ethernet interface OpManager have good statistic. How I can fix this error?
switchport mapper issue
I recently upgraded to the latest version and now when I go into switch port mapper I get the following error on the screen. [ServletException in:SPMMainView.cc] Exception occured when trying to find the view configuration for the given view id : SPMScanning' I also can not put a server into DHCP monitoring. I get the error in the log: authenticationFailure 4 Thanks, Mark
website monitoring
Dear support-team, Is it possible to use the notification profiles with website monitoring? Thanks, PYM
MSSQL 'Login Failed' error on install
I'm trying to install OpManager 7, but when I try to setup an MSSQL connection all I get is a 'Login Failed' error. I'm using the sa account and have even setup a test SQL install on a different server with the same results. Any ideas?
monitoring dell temperature
I am monitoring Dell Servers Temperature from OPManager , but it is showing values like 230 02 220 instead of 23 0r 22 degree centigrade. How can we change the Tenths of Degree Centigrade units values in such a way as to show only exact temperature.
HP Proliant DL320 mirror monitoring
Hi, I'm trying to monitor the status of the RAID mirror using the inbuilt controller of a HP Proliant DL320 but not having any success. I've loaded the CPQIDA mib, but it doesn't seem to be suitable for this controller. Can anybody assist?
Monitors that show CHANGES in values?
Hello! Is there any way to create a monitor that shows the CHANGE in value from the last time a device was polled? For example - CRC errors on an interface. I don't care how many TOTAL errors there are, I want to know how many ADDITIONAL errors there are since the last time this interface was polled. If an interface has encountered more than, say, five errors on any one poll, I'd like to be alerted. Thanks! - Matt
Event Log Rules
After adding Event Log rules to all of our servers I would like to change some settings as we are being bombarded with notifications. Is there a way to reset or turn of the Monitor event log rules for more than one device at a time? I cannot seem to find a way to accomplish this task. Thanks, Joe
Cisco 7206 virtual interfaces monitoring
We have some trouble with monitoring virtual interfaces on Cisco 7206. We are using Cisco 7000 series device type. Physical interfaces monitored properly. For virtual interfaces utilization, errors and discards parameters are not available. Other monitoring system (MRTG) shows this values. Can you advise me something ?
Update opmanger7
Hi, I'd like update to opmanager7. Now I have opmenager6. How I export (import) the database? Thanks
remove exchange monitor
how do I remove exchange monitor from a server in MSP?
OpMangr SQL Installation Problem
Hi Folks, I'm having a problem getting OpMgr installed on a server which currently runs an instance of MS SQL 2005 Express for a different application (I'd rather have one MSSQL instance instead of one MSSQL and another MySQL both on the same server). I'm getting the error "Unable to connect to SQLServer. Proceed the installation with MySql as database". I've verified that MSSQL is set up for TCP/IP connectivity and is listening on localhost:1433, I've also verified the logon credentials are correct
mysql query to list interface speeds
hi all, does anyone know the mysql query to list all of the interface speeds of the managed nodes within opmanager or the table the interface details are held in.
Configuring Riverstone for OPMANAGER 7
Hi!!! I�m trying to configure my riverston in order to monitoring with the opmanager 7, But I�m not pretty sure about the snmp configuration... I have this configuration, But I dont know how to enable the traps for monitor the cpu, Bw and Interface errors.. snmp set trap-source 10.6.12.10 snmp set target 10.6.2.254 community AAA snmp set community AAA privilege read both view I will appreciate any help from you. Best regards!!!
OpManager MSP Alarm generation
Hi there, we have been running OpManager MSP for a while now, we have full alerting of event logs and disk , CPU threshold being sent by email. We have noticed however that the alarms in Opmanager are getting generated from 3 days ago. why is the Alarm generation not up to date. It is not a mail server problem as by checking the Opmanager database it shows the latest alarms are from 3 days ago.
CPU and other Gauge Monitors
Which monitors are used to generate the CPU dial graphs? I want to monitor a wireless access point and it doesn't include the Mibs used for the monitors" CPU utilization". It does use the predefined CPU util. for switches and firewall. I confirm that by testing the monitor. But the dial doesn't seem to use those.
QUESTION ABOUT CUTOMER
Hello My friends. I am using MSP6004 of the OPManger. In the begging(before network discovery), I had created three customer accounts. Although, I register all the probes under one customer and I have discovered the network under the same customer. Now I want to move some servers under the other two customers and keep the rest. I searched for a way to do this but I couldn't. Please If you know how,let me know in details how I can do it. Also, Is there any feature in this version to create a user
7025 Availability Report Trouble
Installed HF 7025 earlier today and tried to run device availability reports for devices in business views and can only get reports that include no more than 11 devices. I don't know if this is related to some of the problems I've reported with my DB and am wondering if any one else is having similar problems?
Issue with MSExchange Monitor
I am presently having an issue with MSExchange Monitor where it will not populate under Application Monitors or wherever it is to be populated in v7xxx. The steps below are what were taken. 1. On v6016 we migrated from MySQL to MSSQL -- issues resolved with support 2. Upgraded from v6016 to v7 and then applied hotfix 7025 -- lost all data in that update. 3. Decided to roll-back to v6016 and use MSSQL backup taken prior to version upgrades -- db corrupt and repairdb did not work 4. Decided best course
Next Page