sql opmanagerdb size question
I'm concerned about the size of my opmanager database. I'm only watching 20 switches and around 20 servers. It is almost 3gb in size and growing. Is this normal? Is there a sql maintenance plan that I could configure?
opmanager via blackberry
I noticed that servicedesk is able to be accessible and viewable via a blackberry browser, however for opmanager, I just get a blank screen - any advice/workarounds? thanks naynesh
MSP: problem creating new user with full control user rights
I use OpManager MSP edition. When i create a new user with full control user permissions for only one or two customer views, this user does not get admin rights, only view rights. When creating a user with full control permissions on all devices, this user does get admin rights. Does anyone know how i can give admin rights to a user for only one customer view? Thanks!
Problem in Opmanager 7
I m facing problem in Op manager.Opmanager shows proper stats when initilly discover and configure devices, but Whenever my PC restarts (on Which Opmanager service is running) due to power failure or some other reason, It failed to get SNMP stats from few devices.It starts showing partial stats for few devices i.e if showing CPU utilization , then unable to show memory utilization.From few devices it is getting full stats.from few devices it is getting no stats.However i have checked that SNMP is
Mail Server settings error
I'm trying to configure the Mail Server settings. When I try to use any of the smtp server settings for gmail, yahoo, etc. I get the error "530 5.7.0 Must issue a STARTTLS command first 35sm249328wra.21" in response to the "Test Mail" test. Any ideas?
Echoing of words in Russian encoding is Incorrect
Hello When writing the name of equipment, its situating and comments to the OpManager 7 problems in Russian after the page refreshing instead of Russian letters there are question marks or numeric�character�set. Could you please help to solve this problem . The decision of purchasing OpManager is depend On its quickest� solving.
AS400 Graph
There is no graph generated when monitoring AS400. Both SNMP and CLI passed the testing. When I test for CPU utilization it also passed. What seem to be the problem. It cannot generate the necessary graph and data. Please help. thank you..
Remove nonlicensed AD monitor
Hi guys. How do I remove the nonlicensed AD monitor after the trial period has expired? It's blocking the view of the server :roll:
Ethernet Interface Traffic possible with Opmanager?
Is it possible to monitor ethernet interface traffic..both inbound and outbound ? If so how do I go about adding this test/monitor. Thanks in advance for your help. P.S. I'll continue to poke around the forums to see if i can find a solution in the mean time.
passing strings to port checks
I'm running tinydns on one of my linux servers. The way tinydns works is that only is that it only listens to udp and it only answered queries for domains that it hosts. Is there any to create a port check and past it a string?
Is it possible migration MSP mysql db to MS SQL Server
My environment : Opmanager MSP edition Ver:6005 w/2 Probe , the central server use default db(MySQL) to stored data&log ...... I want to migration whole data&log db to MS SQL
MySql Database Table Creation Errors
I have OpManager 6 installed on a Fedora Core 6 machine. When trying to start the server, by being in the bin directory and issuing ./StartOpManagerServer.sh I get several mysql table creation errors, which appear to be due to the names of the tables. Here are the errors that I am getting: Exception in creating table Statement being executed was :create table PollingAttributes( NAME varchar(50), TYPE varchar(10), PROPERTY varchar(20), CONDITION varchar(50), VALUE varchar(100)) syntax error or access
OpManager Ver 7, Help Me! Error : IP:X.X.X.X.nexg.net ???
what's problem? key point : x.x.x.x.nexg.net contents of logs folder below. Give me, best Answer! please. source file, attachment! 15:37:36:453 PM com.adventnet.cli.transport.ConnectException: Unable to connect: 211-56-238-130.nexg.net 15:37:36:453 PM at com.adventnet.cli.transport.TelnetTransportImpl.open(TelnetTransportImpl.java:87) 15:37:36:453 PM at com.adventnet.cli.CLIResourceManager.getProviderInstance(CLIResourceManager.java:225) 15:37:36:453 PM at com.adventnet.cli.CLIResourceManager.updateResourceManager(CLIResourceManager.java:153)
Remote Script execution
Hi, I'm looking for the ability to execute remote scripts on linux/unix servers and be able to set a threshold on the output they produce. I know this ability exists in the Application Manager product, but I need to also be able to monitor network elements like routers and switches - an option that does not exist there. I want our server farm administrators to have a single complete view of the network, so I do not wish to divide the monitors across two monitoring systems. Is it possible to implement
OpManager MSP: Communication between Central & Probe-Som
Hello there! Upon going through the forum topics (& blog too!) i found out that the Probe always PUSHES the data to the Central (i.e. one-way initiation, always first to do so). 1. On what factors does this happen... Alarms? or is it a continuous process? 2. Can the PUSH from Probe to Central be controlled e.g. something like polling interval, periodicity etc? Or is it ONLY on an 'on-demand' basis? 3. When does the Central initiate the comm process? 4. How is the availability of the Probe checked?
Monitoring Blade Chassis
Hi, Is there a way we can monitor blade chassis of IBM, HP and Dell. Hope you can help me on this. Thanks..
Database Corruption
Good day all -- We are running 7024 with MySQL native and had problems where you get the prompt at login to run the database repair. I ran the repair and noticed we were still having some problems that included: Can't sort systems, can't add a name to a system and we had doubled the count of our servers. It appeared we had a seperate entry for an IP address and an entry for a name for each server. I ran the repairdb again and this time received the following error: myisamchk: MyISAM file ..\mysql\data\OpManagerDB\polleddata.MYI
Credential Test Failed
When testing the "Credential Test", SNMP and CLI test failed. We checked the same test at AdventNet OpManager demo program. http://demo.opmanager.com/ The results were the same. SNMP and CLI credential test failed. Please see the attached screen which is from AdventNet OpManager demo site. The device is SNMP enabled, and the performance data of CPU, Memory are displayed on the gauges, as you see. We tested all the credential test of the demo site, the same results came out. There are two evaluation
Switch port mapper and Linksys switches
Hi all, i am wondering if there is anyone who has had experience setting up switch port mapper with Linksys POE switches. The switches i am using are SRW2048 and SRW248G4P. I have been on this forum before, but i think i need to specify exactly the devices i am using so someone who has had exposure to both can be of assistance! i am almost positive that it is something on the switches that i am forgetting to do or have stuffed up. Any ideas would be greatly appreciated.
max connections per device reached on solaris
I am seeing this error message in the applnerr**.txt log file when trying to update stats from solaris devices: max connections per device reached on solaris is this a known issue or has anyone come up against it before?
OpManager 7.0 Beta - Feedback
Dear All, This is for those who are evaluating the new OpManager version. ( OpManager 7.0 beta ). Its all new, new UI, new features, new issues ()!!!!! This post is for you, those who want to discuss about the features and issues in OpManager 7.0 beta..... Reply to this post in case you want to keep this thread active!!!!! Regards, OpManager Support.
Opmanager MSP monitor custom device traffic
Hello, I have a device on a specific network that is not pingable but I can check for specific (citrix) traffic on a specific port via telnet. HOw Can I add it to the monitored devices? If I try to import it inserting the ip with a manual device add, this device doesn't come to the added devices. SO if I was able to have this device in the listed devices I'm able,I think, to add a custom monitor on a specific port. The problem is how to import it due to the fact is not pingable. Regards, Giuseppe
when any [selected..] Exchange Monitors are DOWN not working
hi, I have a threshold on "Remote queue length" part of the "SMTP Monitors". On a working "Notification Profile" that emails (which works) I have "Exchange Monitors are DOWN not working" ticked and "Remote queue length" ticked. Today a marketeer decided to mailshot 2000 people a 5mb file. "Remote queue length" went over threshold but we got no email. Now the config line says "DOWN". Should I get emails when threshold are broken or just when service is down? If yes it is not working or I am missing
Event Log Rules - Add Rule
I added a new Event Log Rule for: Source: IAS Category: None Event ID: 1 Type: Information User: N/A Severity as: Attention I applied the rule to our IAS server and generated the event, but OpManager did not report or alert when the Event was generated. What did I do wrong?
Monitor % Free Disk Space
Can you monitor the %age of free disk space for each drive? I am currently monitoring Disk free space in MB, but would like to get a warning when free disk space hits around 4%. Thanks!
Problem Downloading Trial Edition of OpManager MSP
Can anyone please help me in downloading the trial edition of OpManager MSP for evaluation purpose ?
starting probe problem
hi i have install one opmanager probe and it was stop and i am trying to start the probe using startdms command but after certain services started, it wan't go beyond and for that i am sending attachment file so plz helped me sothat i can start the probe and we can monitor the network.
Device discovered as domain controller cannot be accessed
When a device is detected as a domain controller, you cannot access the device in OpManager. When you click on the device you get an error of "Active Directory Monitoring Add On Feature is not licensed." You can't even access it to change the type or delete it. Using build 7023 for Windows.
Status icon in Business Snapshot remains in Crtical mode
Hello, While playing with the SNMP traps, I deliberately activated an alarm to trigger a trap just to see how OpManager reacted. While the result was expected, I noticed that the red cross icon in the Business Snapshot was not cleared (Pls see attached screenshot). I have verified that all alarms are cleared and that the fault that I deliberately created was rectified. Is anyone able to tell me what else must I do or set, to have the status icon refreshed automatically ?
Create a custom telnet /ssh monitor
I have several network devices that are not SNMP friendly, however they usually have Telnet or SSH access available. Is there a way to monitor a device using telnet /ssh commands and convert the outback back into OpManager ? CPU and MEMORY use would be a good example of something to poll.
Display graphs on custom Web Page.
The ability to create custom web pages and display graphs required. I would like a 24hr graph for a device showing UpTime,CPU Usage, Memory Usage, Hard Disk Usage. It would need to be able to auto login for speed of use. It would be also handy as our monitor uses web pages for its screen saver so displays all the device details every 10 seconds.
Monitor SNMP values for hardware (ie harddisks)
I need to be able to monitor specific SNMP OID's to check the condition of hardware. ie the defualt value is 2 if device is ok and need an alert if this ever changes.
OPManager 7
How can i install the new hotfix 7025. what is the procedure. anyone can help. ty..
OpManager 7 -- Scheduled Reports
When scheduling reports, I get send PDF's with reports that state 'No Data Available'. THe only report I have tried that has data is the server availability report. Others, such as CPU usage, Least Free Space all come back blank.
trial probe conversion
hello. is it possible to convert trial probes in MSP edition to full probes?
swap space util on solaris
can you please tell me how to view / edit the command that opmanager uses to monitor swap space on solaris servers as the command that exists does not work. linux uses the free command which works but solaris does not have this utility so would need to use vmstat.
Devices added to google map do not show on map
For some reason when I place any device under the router category on the google map it does not show up when I click add. When I add a server to it they all show. Any ideas?
unable to run repairDB
When I try to repair the DB I get error 22. We are using SQL server and not my sql
Unable to fetch Interface Details
I have one router that the FA0/0 will not show up in the Interface list. It does show up in the Routers\Map but when I click on it I get "Unable to fetch Interface Details" I have deleted the device and waited 14 hours and re added it same issue. I see all the other interfaces on this router and my other routers. Any ideas?
UPS Monitoring
Opmanager has detected my networked ups's but it doesnt show extended battery information - i've set a working login name and password up in the software which i can log into the ups with but it still doesnt get the stats. Any ideas ?
Next Page