How-to get an overview of thresholds and notfications
Hi there, i'm totally confused by my alarms and notifications. First i have roled out a notification profile for a group of servers which some rules. Sometimes there might be some changes on only one or two servers, which have additional services to observe. But when run the Quick Configuration Wizard again, changes are not additional but everything is deleted and decisions you've made before you must do completely again. Therefore i have to check other servers to see what i had ticked before. Not
How do I get a custom monitoring value (OID*0.01)
Looking to take the output from a monitor; to be exact, the Linux load value ".1.3.6.1.4.1.2021.10.1.5.2" and times it by 0.01 That value is an Integer, 9 for example. But the current load is 0.09. So to correct that problem I tried using the following for the SNMP OID: (.1.3.6.1.4.1.2021.10.1.5.2*0.01) Which failed. Is this possible?
i'm problem is no display!
hi i'm want solution.. device : notel 2550T problem is no display. The screen is displayed OS name and device name. but, no displayed cpu utilization and memory utiltilization and notel device is enabled snmp i'm tested add monitor....cpu utilization (snmp, CLI, WMI) but, no display add an attachment....log file help me...
Inventory scanning.
I've installed OpManager MSP as a test on a newly installed 2003 server and added this server to our internal network. Have enabled SNMP on all the devices. On some devices SNMP is working (the blue star is there) but others don't. I'm also not able to run a software inventory, hardware inventory, etc. on any device Reason is that according to the system "Selected asset is not scanned yet". Any idea on how to scanned the assets? Thanks in advance. Paul
HP RAID drive status
Hi there. Can you please tell me how I would go about monitoring in OpManager the status of HP RAID physical drives? as we would like to have that included in the OpManager servers views. We have purchased the MSP edition of OpManager now and although not yet live, most of our customers have HP servers, as well as ourselves, although we can use the HP management software, we would like all the information integrated into OpManager. I have loaded the cpqida.mib file which gives me the support for
add new custom CLI monitors
Hi, I'd would like to know how i can add a new custom CLI monitor. When I add a new monitor, I have to give an OID but I don't have snmp on this host. What can i do?
Unable to access jarfile. \classes\OpManagerStartupClasses.j
Hi, Wonder if somebody can help me with an installation problem I have with ManageEngine OpManager 7. If i run the wizard it gives the following error during the installation: error while i18n It then does not extract all the files but creates the folders. If I extract the files manually running the OpManager.exe file and try to run ManageEngine OpManager 7 the following error occurs: Java Virtual Machine Launcher Unable to access jarfile. \classes\OpManagerStartupClasses.jar I am running the latest
Unmanaged Networks in Opmanager 7
When I was using Opmanger 6, I had some networks I did not want to manage at that time. I used the web interface in network discovery to unmanage these networks. I have since upgraded to Opmanager 7 build 7024 and I would like to manage some of these previously unmanaged networks. I can't find any way to manage them again like I could in Opmanager 6. Is there some menu choice to manage these networks again?
Apache Log file
The Apache log file on my machine has grown to 20 GIG, how do I purge that down?
Moving DataBase
Does anyone have a simple, step by step, procedure for moving the OpManager Database, logs, etc. I currently have OpManager installed on the C: partition of the machine and would like to have the data storage on the D: partition. (I need to move the data for all my AdventNet applictions)
Custom Dials and Values in Device Snapshot Dashboard
Allow for the modification of dials, their presentation and the values being displayed (including custom variables) on the device details snapshot page. Currently this is a fixed table and is clumsy with respect to the monitoring of some equipment types.
Reporting Errors
Hi in reporting Servers Top 50 1. Health Report with Period Last Month report ok for March but the Graph has no data available. all other are ok 1. Health Report with Period This Month has this "This month(From Tue, 1 Apr 2008 to Mon, 31 Mar 2008), Time Window - Full 24 hours, for business view Branches_bv" The dates are wrong The availability graph has data but all other are emplty (no data available) Although Time window is mentioned there is no option to select it 2. Servers by CPU utilization
Startup delay in Initializing Web Server...
An OpMgr Ver 7.0 install on XP is always experiencing a delay during Startup either when "Loading OpManager Services..." or when "Initializing Web Server...". The delay is almost always 3-min 50-sec. After that, OpMgr starts and everything appears normal. I've got the latest hotfix (7027) and have tried repairdb but problem always appears during startup.
mibsToBeLoaded.conf
Hi Is there a posibility to load all mibs containt in direcory? There are a lot of mibs and how to specify to load them all in mibsToBeLoaded.conf .
License View
We are currently using a trial version of optutils, we have not begun to use switchport mapper yet, so we are not sure how many interfaces that we would truly need when selecting a license. Is there a way to view what is currently in use? How does the licensing work if switch port mapper is not used?
Port scan
Another thing that I think would be useful , is if we had an option in the port drop down of "all in list" that would scan all the ports we have put in in the "configure ports" area. Thanks.
Daylight savings time problem
Since the daylight savings time change, opmanager did not advance the time one hour when reporting events. Now all events and alarms are one hour behind. I see that a new build is out. Will this fix the time problem? The time on my server is correct.
Using not equal to in a threshold
I am trying to monitor Dell hardware. The snmp call returns the following. 1: Other 2: Unknown 3: OK 4: Non-critical 5: Critical 6: Non-recoverable The threshold screen only has =, > and < I want the alert to fire when the value is <> 3 How can I do this?
User with "Read Only Access" right can modify data
Hi, I notice that, when you are logged with a user that has "Read Only Access" right, and you specify a device that does not exist in the "Jump to >>" field, you can are prompted to add a device. Sorry your search returned no results. Click here to add a device. Is there a way to prevent this ? Same problem on the main page : when you have no "Business Snapshot", you was will be able to add one even with "Read Only Access" Business View You have not created any business views.Click hereto create
Traffic between two servers
Dear Sirs, Is there a way to monitor the traffic between two servers with OpManage ? Both machines are in the same subnet. Thank you !
Interface Speed
Hi, I'm pretty new to OpsManager and need some help in understanding some of the reports shown for the Interface Details. When I check a particular interface of my Cisco switch, for example, in the 'interface details' box it states the speed of the interface to be 1.54 Mbps. I would like to know if this value is obtained by calculating the rate of traffic going through the interface at that point in time or if it states the bandwidth allocated through that interface (meaning that it will continue
OPmanager Device Templates for EMC Arrays
I know that you have the OpStor product, but I would just like to get a general heart beat type response for Clariion CX300 and CX500. Can you please add this vendor and Type to your device templates. Thanks Mark
How to modify default monitor interval of ressources monitor
Hi In OpManager 6.x, it was possible to modify the default monitor interval and default Threshold of a certain monitor type (for exemple Free Disk Space in MB) through "Ressource monitors" in the admin tab : How do do this in OpManager 7.x ? Regards DPE
Enabling thresholds to all servers for specific items
Hi, How can I enable the threshold counters for a group, or list of devices. For example, by default, the CPU Utilization threshold is not enabled when adding a device. I now want to enable this for all my devices in the Servers catagories. Can you assist? Many thanks, as always, Derek
MIB upload
Sorry to ask what may seem as such a basic question but I have found a MIB that monitors Proliant servers and specifically the RAID array but have no idea how you go about importing it into Op Manager MSP. Can someone please give me a pointer or a document or something. Thanks. :!:
OpManager auto-start on Linux
Hi Everyone I'm evaluating OpManager on a CentOS 5.1 system, and I can't make it to start automatically after a reboot. Is there any way to make OpManager to start automaticly "as a service" in a linux box? Thank's for any help.
interface stats no longer display
hello, as you can see from the attached, the summary of interface traffic no longer displays on ANY device, but clicking an interface will provide a detailed view, graphs etc. any way to get this feature back? it stopped working a few days ago.
To translate ServiceDesk Plus in Brazilian Portuguese
I'm interested to translate ServiceDesk Plus in Brazilian Portuguese. I's possible ? Thanks. Paulo
7027 TimeWindow not exist on All Servers Availability
Hi Time window on reporting was supposed to be on availability reports why it is not implemented in All servers availability and All servers Usage? Regards
Announcing the Release of HotFix 7025
Dear Users, We have released the latest hotfix (Build 7025) which can be applied over Build 7010 or higher. If you are on an earlier build, please upgrade before applying this hotfix. Following is a quick summary of the issues addressed in this hotfix: 1. Blank page in the interface snap shot page if there is any special character is fixed 2. Listing the interfaces in the Interface Template Page is fixed. 3. Availability Report for devices in a business view - fixed 4. Test Credentials details printed
HotFix 7027 Released
Hi All, We are glad to announce the release of HotFix 7027 for OpManager. Some of the features and fixes included this hotfix are. 1. Support for monitoring Exchange 2007 Server is included. 2. Issue of OpManager Service not starting with dbowner account in MSSQL database, is fixed. 3. New Device Template by default is included for Liebert UPS. 4. Multi-level dependency support is included. 5. Option to add new drives is provided both at the device template level as well as in the device snapshot
Huge log file
OpManager has a log file that is 19 Gig on my machine. It is a single file. How do I purge that down? Can that be automated?
how to install probe in client side system
how to install probe in client side system.That is i downloaded the ManageEngine_OpManager_MSP.bin.I am using linux fedora.I am not able to install the probe using the "./ "command.Can any say how to install Regards Lokesh
Escalation not working
I get email alerts when an alarm is triggered, and have configured escalations to send a mail if they are not cleared within three hours but I do not receive these escalation emails. Can anyone think why?
How di I delete a performance monitor?
How do I delete a performance monitor? I built a new performance monitor to watch a systems load average, but got the OID wrong. How do I delete that monitor. Not just remove it from systems?
Monitoring a Process
We are about to purchase a monitoring solution and OpManager has a nice interface but we really need Process monitoring as well... is there something coming out for this? - Brandon
Getting OPManger CD and also the Service Helpdesk
Hi, I'm new to this Software, i downloaded the trial version which i like so much, i dont know how to go about getting the real software. Can someone help out. Thanks Kemi
OpManager vulnerabilities
Our monitoring systems just got disconnected from the network do to OpManager. Here is what our network scanner saw that caused such an aggressive response. Medium Apache < 2.0.48 Web Servers Medium Apache Input Header Folding ... Denial of Service Medium ManageEngine OpManager Login ... CGI abuses : XSS High Apache < 2.0.51 Web Servers We are now with out a network monitor in our environment. When can expect these issues resolved.
URL authentication and business views
Two questions: 1. How can I validate that a URL has been authenticated in the URL monitor? Can you tell if any events are generated that can be tracked? 2. How can I create a business view with URL monitors? For example, I'd like to attach a URL monitor to a server in the business view so I can see what URLs will be affected by a server outage. Please advise. Derek
opmanager for WinXP client doesn't show any monitoring
Hi all, I've the following problem. when the command : "cpu.vbs <device name> admin <password>" is executed from cli where the opmanager is installed, i have results, with no error. There no domain in the LAN when PCs are installed On opmanager GUI, there's no result from performance monitoring. When test monitor is launched, i've got : possible reason : 1. The device might be down. 2. The username and password provided for this device might be wrong. 3. The domain password for this device was not
Next Page