ManageEngine Backup Question
The backup procedure for the ManageEngine products is a bit of a chore in comparison to the rest of my backup system but it has to be done. I understand that there is bat files to stop the service\servers, start the backup, and restart the server\service, so it stands to reason you should be able to create a bat file to do those things in some kind of sequence and use Windows Task Scheduler to automate the backup process correct? Then my normal backup would run and the running db would not be backed
HWg-STE SNMP Temp Sensor - MIB
Hi, I have problems implementing our new SNMP Temp sensor in Opmanager. 1. The MIB I got from the manufacturer doesn't get accepted by Opmanager. I used an other SNMP browser which accepted the MIB file. I attached a screenshot from the 3rd party SNMP browser (snap.png) and the MIB to the topic. 2. I tried to add a new sensor to the Template using .1.3.6.1.4.1 (RFC-1213) which seems to be compatible with the sensor. Regarding the Opmanager SNMP browser I need .1.3.6.1.4.1.21796.4.1.3.1.4.1 which
OpManager Update Issue
I was running OpManager update from 8022 to 8050 but this installation ended abruptly. I am able to start OpManager and it works fine but when i go to About, it still shows version 8022. When i try to reinstall the 8050 update, it comes back and says that i already have 8050 update installed. I dont see updates to uninstall in UpdateManager. Is there a way i can re-run the 8050 update? Thanks
How to send from OpManager Trap to other Trap receiver?
Dear All, We have tested Trap using OpManager and AdventNet Simulation Toolkit. We sent Trap from Toolkit (using SNMP Trap Stormer) to OpManager. Work's fine! OpManager received message: "ColdStart : ADSERVER.1.3.6.1.4.1.311.1.1.3.1.3 Hardware: x86 Family 6 Model 15 Stepping 6 AT/AT COMPATIBLE - Software: Windows Version 5.2 (Build 3790 Multiprocessor Free)" In order to send to Toolkit (using Snmp Trap Recorder) the Trap (where OpManager received Trap), we have configured as follows: We have modifies
Snmp Traps is not shown after added the trap processor
Hi OpManager experts, I have difficulties when the traps processor for the 'unsolicited traps' is created, the traps doesn't shown in the alarms section. Below is the steps i did to the opmanager, 1. Install OpManager under ubuntu 10.04. 2. Start OpManager with root access. 3. send trap to the localhost ip using the snmptrap tool from net-snmp: #> sudo snmptrap -v 1 -c public localhost '' localhost 2 1 '' 4. The trap is sent, and can be seen under opmanager "unsolicited traps" 5. Create the
Poller SNMP
SNMP Poller stops after one day after launch Platform Debian 3.0, Opmanager Build Number : 8052 Total Monitored Devices : 209 Total Monitored Interfaces : 6084
Installation Opmanager
Good afternoon I just do the training in Opmanager Inspirit which is located in Brazil, and I'm having doubts on the installation Opmanager how can I get those doubts. I need an installation of Opmanager process step by step because I am doing a Discover Network Device and he is doing in monitoring the machines, and all my windows network and I already checked on all machines and the Serbian WMI and SNMP esto all correct. That if possible please send me some via email douglas.callegari@megainfra.com.br
Did OpManager support Huawei and H3C devices ?
We have lots of customers who using Huawei or H3C network devices. But i found that OpManager did not support any of those devices, we must create device template by ourself. We did it all the time, each time when we need to install OpManager for customers, we have to recreate those device template again and again. Could you please help us ?
Devices not showing down.
Hi Support, I have Observed, OpManager did not show down on which devices they have Ping status "Destination host unreachable" or "TTL Expire". kindly do needful Regards, M. Furqan Akram
How to monitor IBM DS-3400 SAN
Hi, I have a DS3400 SAN installed. I've been able to configure the snmp community and the Trap host ip address however I can get any data from it. Does anyone have been able to setup in OPManager ? Cheers Andrew
Analog Modem on Opmanager
I have connected an analog modem on my Opmanager Server. With Windows I can connect to the modem and test it with no problems. Opmanager however keeps saying: Modem is not connected properly. Check your settings! Any ideas what i am doing wrong ?
Test Throughput between 2 end nodes
Hi everybody, I want to know if OPmanager is able to test the throughput between 2 End points and if so , how this can be done Thanks AZ
[OPManager] SUN Solaris component tempertures and RAID monitoring
Hi there, Need some help in configuring temperatures and RAID monitoring for Solaris servers and also our Dell PowerEdge 2950 servers. I tried working with the templates provided but couldnt get anywhere and I am not sure if we have the MIBs needed for it on SNMP. I am also trying with the telnet/ssh login creds for the server where i can issue ipmitool sdr list |grep degrees so i can filter some results. Can anyone assist please? Thanks.
Monitor Wan links other than Cisco
Hi! We have several remote offices that we would like to monitor the wan links on. The problem is that we DONT have Cisco routers but we use HP and EdgeCore switches with routing capacity. How can we monitor the response time and traffic on these switches? The WAN Add-on only seems to work on cisco routers.
Advanced Alerts
I previously evaluated OPManager and was wondering if Advanced Alerting was going to become available. I have the need to create multiple alerts based upon the same criteria, this was one area that OPManager feel short when we reviewed it. I need to be able to alert on the following Disk Space Used > 70% free and Disk Space Used < 80% Disk Space Used > 80% free and Disk Space Used < 90% Disk Space Used > 90% free and Disk Space Used < 100% Disk Space free > 100MB In my current monitoring product
How to install WMI on Client PC
Hello, I'm trying to use Opmanager with the WMI protocol, but I can't get it to work. I think the reason why it isn't working is because I don't know how to install it properly. That because I've never done it before. Maybe there is a port that needs to be forwarded or another service that needs to get activated but I can't find what it is. For testing the WMI I'm using a small free windows program called Solarwinds WMI Monitor. When I test the WMI protocol it says that the Remote server is unreachable
Buffer Failure
What is Buffer Failure with Cisco Router?
Opmanager cannot monitor the server it resides on
I am having an issue where opmanager cannot authenticate to the server it is currently residing on, therefore I cannot monitor it's resources. I've never had this issue before. Could you please advise on this? --Nate
Exchange 2007 Dashboard questions
Hallo. I just enabled the Exchange dashboard. I am running Exchange 2007. I wonder about send/received statistics. After finding out that the SMTP monitors don't work for 2007, I started wondering why they are added and displayed in the dashboard. What I would like to see is a send/receive statistic per hour/per minute or so. What I see in the transport monitors is Messages received per second. All other statistics values are 0. The messaged received total doesn't give me a lot of information. I
Retrieving cisco router config changes hostname!
Tonight we had a minor disaster. I set up OpUtils to copy some of our router configs, which had hostnames like this: hostname router1.site1 hostname router1.site2 etc. Well, OpUtils CHANGED THE HOSTNAMES when retrieving the configuration, dropping the suffix qualifier. As a result, a technician didn't realize he was in the wrong router and screwed up a configuration. I've verified the behavior in several tests. It also changes the domain name, prepending the suffix it stole from the host name (e.g.,
Custom MIBs in the switch summary
Hi, Currently trying out OPutils as I look for a system to track our switching/ip needs, and I'm having a bit of trouble with getting info up for my switches. I am using Extreme Summit 350x switches, and the switch summary screen slows port/mac and link information, but not the VLAN names of each port. I have added a custom MIB into the MIB browser, and if i walk through using that MIB, i can see the VLAN ids. My question is, how do I get these vlan ids to show in the main switch screen? Thanks,
when i am trying to setup email alert it is giving me error 6002
i tried to set up the SMTP with gmail and yahoo but are not working getting error E6002 please help me out inthis u can email me on shinep@intelligroup.com
All my laboriously entered subnets vanished without warning!
I spent a couple hours carefully entering all our subnet records, then suddenly they all vanished! I thought I must have accidentally hit delete or something, so I began entering them again, and before I got a third of the way through it happened again! This time I'm certain I did not press delete (and anyway, OpUtils would have asked for confirmation, no?). The records all entirely vanished. I just bought this and if it's unstable I'll want a refund. What's going on? I'm running on Windows Server
URL Monitoring - controlling browser reported
Hi, new to OpManager and looking at it to check some sites for me using URL Monitoring. The sites expect certain browsers to present themselves and use javascript and vbscript to check browser and redirect if valid supported one. Can I get URL Monitor to lie about what it is and support script so I don't have to make code changes to the site to allow it to be monitored? If this is all covered off in a manual page(s) somewhere please just redirect me to appropriate section as I haven't looked at the
Cannot complete monitor ESX Server
Dear all, I can monitor Virtual Machines's CPU Util and Mem Util from ESX Server But Disk IO and Network IO cannot monitor please recommend me how I can revise configuration for complete monitor Virtual Machines .
Memory and CPU Utilization Process
Hi OpManager Team, Kindly assist on this , i would like to know what process is going on when the alarm trigger CPU or Memory is above the threshold. I think it OpManager should able to view the process. Thanks you, Regards, Ahmad
Cisco CATOS Support Problem Again
Opmanager first found the cisco 6509(CATOS) as a route and I change the type to Cisco 6500 and switch type. But the portname can not show the right name(such as Ethernet G2/1 etc.) and only show "long ...". For this customer's network topology is cisco 6510 connect with cisco 6509 via the ATM layer(Nortel Passport 15000). Please tell me how to solve it. I also want to know whether the product support cisco CATOS. For performance monitor. It can show memory usage and cannot show CPU usage. Frank
Error occured: We are sorry for the inconvenience.
We have a problem on a newly installed server with OpManager 8052. The server is running Windows Server 2008 R2 (which I was promised by OpManager support that it is supported running platform). The problem is that when you run the dashboard (we are running it on a remote machine) a message appears saying: "Message from webpage" "Error occured. We are sorry for the inconvenience." "Please try after some time or refresh the page and try again" Sometimes it helps just to click OK and the dashboard
manageengine supported devices???
can anyone please tell me where can i find the list of supported hardwares for the manageengine network management software??
Dashboard Refresh
Is it possible to have only the widgets do a refresh on the dashboard? When the whole dashboard does a refresh the widgets that show real time traffic looses there graphs for a few seconds before it picks up again. We have widgets that show "Recent Alarms", "Business View Summary" and "Devices Exceeding Response Time" and for them to update there status the whole dashboard need to be refreshed. It would be great if you could set up individual refresh rates on all the widgets instead.
read xml output
Is it possible to read an output from a custom xml in opmanager?
OS Processor Queue Length alerts
Hi, Opmanager is throwing alert messages and I'm not sure if this means there is an issue worth looking into. Anyone familiar with an alert like this? Source Domainserver Severity Critical Last Updated Mar 13,2008 03:39:07 PM Message OS Processor Queue Length is 15 Queue, threshold value for this monitor is 13 Queue thanks
RHEL 5 Monitoring Issue -- Vinod Pardeshi.
Hi, I have installed opmanager 8 with build 8052. I have installed adventnet Snmp agent on RHEL 5 64 bit server. When I add that linux server in opmanager & check the Credential Details using both snmp & clip,everything is OK till here. Now the data in CPU & memory Dail is all Wrong. Plz help we have around 6 RHEL5 Server. & I need to dotesting on all server. Regards Vinod Pardeshi
Periodic Backup in OPM
Dear All, No functionality about Perodic Backup. It is possible memual only. Is it right? So we want those feature. Is it feasibility?
HOW CONFIGURE MIB
is there any document explaining how to configure mib? how to use mib browse? any tip?
Migrating OpManager
Hi All, We are currently running OpManager Premium 8052 (32 Bit) on MSSQL 2005. Our hardware is a little underspeced and we wish to migrate to a new server. Is there any documentation to refer to? We also want to upgrade the OS from Windows 2003 (32bit) to Windows 2008 RC2 (x64) and also upgrade MSSQL to 2008. I also have another thread for the Windows 2008 RC2 support: http://forums.manageengine.com/#Topic/49000004040651 Thanks Chris
VM monitoring
Hi, i am unable to fetch the VM installed in Vsphere (ESX server version4). what is the way to fetch what all Virtual Machines has in installed in Vsphere currently using Opmanager build in 8052
TTL EXPIRED IN OPMANAGER
I am still having problem ttl expired in Opmanager routers Expiring your time in transit do not get critical status with status are UP anyone know a patch to fix this problem ????? Pinging 10.190.8.1 with 32 bytes of data: Reply from 10.190.241.8: TTL expired in transit. Reply from 10.190.241.8: TTL expired in transit. Reply from 10.190.241.8: TTL expired in transit. Reply from 10.190.241.8: TTL expired in transit.
Start Opmanager 8.5 on Ubuntu server 8.04LTS
How do I get opmanager 8.5 for linux to start automatically at boot on Ubuntu server 8.04 LTS, I have installed the application in the /root/ManageEngine/OpManager/bin directory. Thank You.
Opmanager 8040 and java.exe using up all memory
Has anyone experienced a serious java memory leak upgrading to version 8040. In a short period of time (two days) it consumes all memory on the server.
Next Page