read xml output
Is it possible to read an output from a custom xml in opmanager?
OS Processor Queue Length alerts
Hi, Opmanager is throwing alert messages and I'm not sure if this means there is an issue worth looking into. Anyone familiar with an alert like this? Source Domainserver Severity Critical Last Updated Mar 13,2008 03:39:07 PM Message OS Processor Queue Length is 15 Queue, threshold value for this monitor is 13 Queue thanks
RHEL 5 Monitoring Issue -- Vinod Pardeshi.
Hi, I have installed opmanager 8 with build 8052. I have installed adventnet Snmp agent on RHEL 5 64 bit server. When I add that linux server in opmanager & check the Credential Details using both snmp & clip,everything is OK till here. Now the data in CPU & memory Dail is all Wrong. Plz help we have around 6 RHEL5 Server. & I need to dotesting on all server. Regards Vinod Pardeshi
Periodic Backup in OPM
Dear All, No functionality about Perodic Backup. It is possible memual only. Is it right? So we want those feature. Is it feasibility?
HOW CONFIGURE MIB
is there any document explaining how to configure mib? how to use mib browse? any tip?
Migrating OpManager
Hi All, We are currently running OpManager Premium 8052 (32 Bit) on MSSQL 2005. Our hardware is a little underspeced and we wish to migrate to a new server. Is there any documentation to refer to? We also want to upgrade the OS from Windows 2003 (32bit) to Windows 2008 RC2 (x64) and also upgrade MSSQL to 2008. I also have another thread for the Windows 2008 RC2 support: http://forums.manageengine.com/#Topic/49000004040651 Thanks Chris
VM monitoring
Hi, i am unable to fetch the VM installed in Vsphere (ESX server version4). what is the way to fetch what all Virtual Machines has in installed in Vsphere currently using Opmanager build in 8052
TTL EXPIRED IN OPMANAGER
I am still having problem ttl expired in Opmanager routers Expiring your time in transit do not get critical status with status are UP anyone know a patch to fix this problem ????? Pinging 10.190.8.1 with 32 bytes of data: Reply from 10.190.241.8: TTL expired in transit. Reply from 10.190.241.8: TTL expired in transit. Reply from 10.190.241.8: TTL expired in transit. Reply from 10.190.241.8: TTL expired in transit.
Start Opmanager 8.5 on Ubuntu server 8.04LTS
How do I get opmanager 8.5 for linux to start automatically at boot on Ubuntu server 8.04 LTS, I have installed the application in the /root/ManageEngine/OpManager/bin directory. Thank You.
Opmanager 8040 and java.exe using up all memory
Has anyone experienced a serious java memory leak upgrading to version 8040. In a short period of time (two days) it consumes all memory on the server.
Corrupt Views
Hi, Is there a way to rebuild the infratructure views? Mine are showing weird problems, e.g., devices in the wrong views. Thanks
In OPM, the measured memory utilization is high than real memory utilization.
Dear all, Our customer installed OPM server in linux device. Managed server Linux version: 5.2.6.18-128.e15 64bit They manage the linux server using SNMP protocol. (HOST-RESOURCE-MIB). They can't the Telnet/SSH protocols because of security problem. Asset Detail: Measured memory utilization: Issue: When we click the Test Monitor button, the memory utilization is normal as follows: The memory utilization shows normally in the Snapshot page as follows: But when UI is refreshed, the memory utilization
Monitoring SQL jobs in SQL with OPmanager essential
Hi There, I'm a new user that is using the OP manager essential. I'm trying to configure a monitor for MSQL jobs. I can see the SQL server but I cant't find where to cnfigure the monitor. Same for Exchange. Can anyone point me in the right direction? tnx Danny
Windows 2008 Server Ports
Hi There~ I am trying to monitor a windows 2008 server, but I am not able to do if the firewall is on. I can monitor it if i shutdown the firewall. Could you please tell me what are the port numbers that should be opened in firewall to monitor the windows 2008 server? Regards, Balaji Vembu
OpManager 7 - No RX or TX on Interfaces on Device Snapshot
I do get interface detail info, so I know OpM is gathering the data with SNMP, but it displays "NA", "NA", "NA" for Rx, Tx, and Errors I tried removing and rediscovering the interfaces with no success ideas?
Trial of VoIP monitor in OpManager
Hi, I'm a licensed (Premium) user of Opmanager. How can I trail the VoIP Monitor features with in my existing site? Regards, Carmel Lee
A scrolbar when you add a link
When you add a link on a map between 2 devices sometimes the names of the interfaces are to long that you aren't able to see the whole name of the interfaces.
Only the first MAC address from switch port mapper per port shows up in IP address area manager.
Hard to explain, but if I have multiple ip address's/mac address's connected to a single port on a switch (because the other end has a dumb switch, is a virtual server, etc), only the he first ip/mac listed in the switch port mapper section (the rest are listed when you click "more') will have that corresponding port listed in the ip address manager section. Does that make sense? Please advise.
OP-Manager delete SMS notification Q
Hi, I'm using OP-Manager installed on a virtual machine with the DB in MS SQL. We are in the latest build 8052. The SMS modem is attached phisically to the host and all is Ok if the VM doesn't move (VmWare V Motion) to another host. If this is hapening the SMS notifications will be queued. Once the VM will be moved back to the proper host and connected to the SMS modem, all the queued SMS will be sent over. Is there a solution to delete the SMS in the queue? If not I would need to wait that
ifspeed change alerting
I'm evaluating OpUtils at the moment and I have a question concerning the interface speed. We had some problems with the cabling in the past. The result of these problems was a change of the interface speed from 1Gbps to 100Mbps. At the moment nobody notices such a change until a problem occurs. Is there a possibility to generate an alert with OpUtils if a specified interface changes the speed? It is not necessary to generate this alert immediately. An alert after a scheduled rescan (every hour)
Setting up SNMP in Linux Environment
Hello, I installed and configured the SNMP for Linux per this website. http://net-snmp.sourceforge.net/docs/INSTALL.html The installation went thru find without any errors and when I type the rpm -qa |grep snmp, it gives the the version, etc. That means the snmp was installed correctly. But, when I tried to start the service, it won't start. I tried all the commands that was suggested here to stop and start the snmp services, but it says that the file can't be found. So, I created the snmp.conf and
Cisco Content Services swith 11503 (Load Balancer ) device template
Any body is having Cisco Content Services swith 11503 (Load Balancer ) device template ?
Statistics not available
Hi, I have an OP-Manager build 8052. I have setup the performance database as below: detailed statistics: 90 days; hourly statistics: 90 days; daily statistics: 365 days; I am monitoring a switch since more then 6 months but if i want to see any report of any interface i am able to see the data just from the last 6 days including today (example: from 6.05.2010 at 01:10 till 11.05.2010 09:43). I have tried to place other periods like last month, last 30 days, custom period, all are starting from
Refresh data of all defined servers
Hi, Is there a way to refresh all servers defined in OPManager after executing RepairDB.bat? When repairing the DB you will have to get the latest databasae backup right. Thanks.
OpManager process shuts down automatically
Hi All, I have a question about our opmanager. The process is started automatically in our company, but in every three days it will stop automatically aswell. Followed by event id 7036 The ManageEngine OpManager service entered the stopped state. We have to manually start the service again, and then it's working again for three days. How can i prevent this to happen, and let the opmanager service stay online? Thanks in advance. Eddy
How to install & run OpUtils in Cent OS?
Unlike other unix based operating systems like Redhat, Fedora, Ubuntu, etc., Cent OS need some specific changes during installation. The steps below will guide you in getting OpUtils installed on a Cent OS: Download the Linux installable from our website and run the installation. The installation can run either as a normal user or a root user. After the installation, login as a root user and execute the command: export PATH=/usr/sbin:$PATH Now, run the installFirebird.sh located under <Install_Dir>/ManageEngine/OpUtils/bin
SNMP v3 Stops Working When Device's IP Changes
The network that we have OpManager installed is fairly dynamic and the IP addresses of some of the devices change on a regular basis. A recurring problem that we are having is that when the IP address of a device changes and we update it in OpManager (and its associated entry in the local /etc/hosts file), we are no longer able to query SNMP v3 statistics from the device. We can still poll it using snmpgets from the linux command line and browse it using your built in mib browser, but it will not
smtp settings
how do i check for my smtp settings
MSSQL monitors send notifications to profileseven when not selected
We have MSSQL server monitors running on OPManager 8052. Average Lock Wait Time monitor is set to poll every 15 minutes with threshold 5120. Whenever threshold limit is reached, notification is sent to EVERY notification profile defined for the server even when "when any [selected...] MSSQL Monitors are down" Criteria is not selected for some notification profiles. Also other MSSQL monitors behave the same, Average Lock Wait Time monitor is just one example. Notification is also sent when this Average
Search Display Name
Hi, Is there any way we can search for a switch port in OpManager by f.ex searching for "Display Name"? I can only find a search for Device. Thanks, Jan Ove Greger
Monitoring Domian Controllers
With earlyer versions of OpManager it was possible, to monitor Windows domain controllers WITHOUT the active directory add on to OpManger. Of course, one couldn't monitor active directory counters, but one could monitor ressources such as memory or disc comsumption as well as hardware failures (as long one was installing the correct MIBs). Today I found out, that this is not longer posasible using built 8051 of OpManger: the system detects domain controllers but refuses access to them, stating
How to get date and time for memory and cpu utilization
Hi, In report server memory and cpu utilization they only show the min,max and average. For each server if they reached max above 100% then i have to get the date and time when was the incident happened.Then i go more details by clicking into server snapshot page and check the cpu and memory utilization but it still not showing when was the server cpu/memory hit 100%.Can somebody help me how to get the exact date and time when was the cpu/memory hit 100%.Thanks.
[Service Startup] - Stop IE from starting at opmanager startup.
Hi, I'm currently reinstalling my whole Opmanager setup from scratch on a new Windows 2008 server (Been doing tests and upgrades since version 5...) and I was wondering if there was any way to prevent IE from starting when Opmanager service start (or restart). It never been usefull since I dont manage from the server, but now when the Service tries to interact with the desktop a popup appears telling me that a service requires attention... And its a bit annoying, so how do I deactivate this ?
Alarm page is showing wrong
Hi Team, We are using op manager 8 (build no 8050). when i am clicking alarm page it showing current alarms.if i m clicking next its showing one year old alarms, awating for your reply
Application and SLA monitor
Hi guys, I am looking for a software which could be able to monitor applications and SLA parameters. One of the main characteristics is that it could offer detailed information about TCP connections. For example, time to complete the handshake, retransmitted, lost, out of order packets, data rate, traffic volume between server and users (endpoints), tcp sessions, etc. It´s a big network with thousands of clients. Hope you can give me the best option.
Problems with configuring Multiple Thresholds
Normally the way we configure multiple thresholds is by doing it at the template level. For some reason we are not able to modify the thresholds for Windows Server 2000 and Windows Server 2003 devices as the only monitor that can be configured this way for those two types of templates is Disk Utilization, everything else (CPU Utilization, Memory Utilization and Partition details thresholds) cannot be mass configured, but have to be configured one at a time. Something that is incredibly tedious and
Select a specific OID in the Device Template
Hi, I am creating a new Device template for a Juniper switch. I put the right MIB in the OpManager mibs folder. Then I created a new template for the right SystemOID. Then I associated a CPU monitor to this template. The problem is that Juniper has several sub-OIDs under the CPU OID. The wizard doesn't let me choose a specific OID but only the main leaf. Is it possible to specify the OID manually instead of choose it with the "MIB Browser"? The problem is that under the main OID I have several sub-OIDs
device summary empty
Hi, I have a fairly recent install of OpManager. My main dashboard shows the Device Summary box empty. What gives? Even if I edit the widget choosing servers, it doesn't show anything. Thanks --Derek
Database Maintenance - not working
Hi, After changing the options in "Database Maintenance" and restart OpManager's service, the changes are lost and back to the default factory. Any idea? Thanks, Reinaldo
VMWare Version 4 Support
Hi! As we people know that now VMWare Version 4 is release. And as of today OpManager is not supporting VMWare. So we want to know that when you people will add support for VMWare 4? OpStore people have already provides VMWare Version 4 Support. Regards, Dipak Raste
Next Page
