Opmanager 7 build 7021 - Cisco Device Problems
Hi, We have a problem in that the interfaces on our 3845/3640 routers and pix515 firewalls are discovered but we dont get any statistics, additionally none of the gauges work other than the availability one. This worked fine on version 6 There are several other issues we have encountered Cisco 3560 switches get mis identified and added to the "routers" group. When using cidr discovery it oftens populates all 254 addresses even though only a few really exist I have checked things like correct community
Need opmanager MSP6003 admin guide
The support tab for our version brings us to the new version support page. Does anyone have the previous admin manuals? We desparately need them and Adventnet apparently doesn't have the old versions. Please send them to opmgr@lanlord.net Thanks!
Graph Network card and VPN traffic
Good Day, I have a Sonicwall 4100 and 3 4060's I currently graph network traffic on. I would also like to graph VPN traffic on these devices. I have the SNMP mibs and they can retrieve bits in/ out, etc. Is this something that can be done with say an Interface template? How would I go about creating one? Thanks!
Can I do deltas with custom WMI monitors?
Hi, I have a WMI script that collects "total anonymous users" for all web farm servers. Below will collect and graph the totals but I need the delta between polls to give me say 100 users per 5min poll. <DEFAULTGRAPH Name="WMI-wwwxxxx-orgcom_requests"> <YAXISTEXT>Requests</YAXISTEXT> <DISPLAYNAME>wwwxxxx requests</DISPLAYNAME> <name>WMI-wwwxxxx_requests</name> <Vendor>WMI</Vendor> <Description>Monitors all UI servers</Description> <oid>WMI-wwwxxxx_requests</oid> <Provider>WMI</Provider> <type>multiple</type>
Error Removing Interfaces
Hi, Any time i go to remove an interface from a Switch/router via the interface tab of the device , Opmanager reports tht it is unable to remove interfaces. This very anoying as some of or Switches would have over 300 ports ad we would only want to view 5-6 of them. Also, when i go to alter a setting under the Interface Templates, e.g : Discards on port, after i have made the change, saved it and saved it again to the list of Ethernet (6) interfaces, all of the ports that i was previously NOT monitoring,
OPManager Web Page problem
Hi, I don't know where to properly address this concern because the feedback mechanism of the website is not working well. I'm currently evaluating OPManager and comparing it versus SolarWinds-Orion so I need as much as info that I can get out of OPManager. But I ran into an annoyance with the /opmanager page of adventnet.com because it loads EXTREMELY slow. It seems that all the pages under /opmanager are so much lagged/slow that it takes about 5 minutes before each page appears on my browser whereas
add your own monitoring scripts
Hi I am trialing OpManager. Does any one know its possible to add your own monitoring scripts or plugins? Thanks Derk
Unable to upgrade to 7 from 6
I'm trying to upgrade to OpManager 7 from 6 but after clicking the .exe installation package the application asks if I want to remove the installation, not upgrade it. How do I get around this problem?
Problem with 6005 Upgrade..
Hi There, We did the upgrade on the central server to version 6005 from 6004 and this seemed to go all good, the services started back up and we could access the central console and view the probes. After around 20 minutes (I am guessing the time it takes for the probes to update) I started noticing several had dropped off and were red. We logged into each one and all the services are running and the Icon is in the task bar indicating OpManager is running but no communication with the central server.
URL Monitoring
Hi All, We have been monitoring a number of internal hosted websites and a number of external hosted websites. In total we are monitoring around 10. The majority are working but we are having a problem when we try and monitor http://intranet OpManager reports Data received from:http://intranet The URL http://intranet is down, Reason : Host Unavailable I'm not sure what the reason is. I have added it too the no-proxy and the rest of our internal websites work. Is there a log somewhere to check what
FIREWALL
HI, CAN YOU GUIDE ME HOW TO CONFIGURE SNMP CONFIGURATION IN THE FIREWALL? PLEASE GO THROUGH THE ATTACHMENT. THANKS AND REGARDS K.CHITTIBABU
backup script, xcopy command not working
This sort of off-topic. I'm writing a script to backup OpManager every night. Here's what I have so far: ______________________________________________________________ cd C:\Program Files\AdventNet\ME\OpManager\bin\backup call backupdb.bat /sh xcopy C:\Program Files\AdventNet\ME\OpManager\backup\*.* z: /d /z /y _______________________________________________________________ The first two lines work fine, but the last line does not. It's supposed to copy the contents of the backup folder on the server
Is it possible....
When you view a device details, there are three main Circle detailing performance of Processor, Memory, and Disk Utilization. Is it possible to choose what goes in there. For example, for my Powerware UPS I could choose Load Percentage, or for a server I could choose Temperature instead of Processor? I think this would be a good idea if it is not possible as many devices I would like to check its 3 critical functions and they are rarely Processor, Memory or Disk Utilization. Thanks for an awsome
Optimization Techniques
Can anyone here please share mysql and java application optimization techniques they've had success with (speeding up performance, paring down memory utilization, etc.)? TIA
Is it possible? - feature request
I'm just new in testing Opmanager Is it possible to read Operating systems environment variables from remote servers? I would like to create scripts that do some tasks and the result is stored in a variable - e.g. count the number/size of files in a directory - the variable could then be read from Opmanager. (Stored in DB for graphs) Is it possible to create notifications according to working hours Example during 7am to 5pm notify Helpdesk by e-mail - during night notify by SMS to someone else? Is
Opmgr MSP Model
I am evaluating the MSP software and I have the Central site and the a Probe PC configured and operational. I have discovered some networks and I can see some alarms pertaining to those devices in the Central site PC. I want to enable snmp traps from these devices to be reported as well. I have configured the devices to forward these traps to the ip address of the probe PC and I can use my sniffer to see those traps hitting the Probe PC. But when I go to the Central site PC I do not see any snmp
When Are DC's Going To Be Included In Reports
Or is this problem already fixed in a patch/upgrade? TIA
Google Map View
Hi, Is there any way to increase the viewable size of Google Maps. We are viewing it on a 42" Plasma at there is so much un-used space. Cheers
Problem in OP7 Adding Switch!
Hi,Op team I have installed OP7 in Windows 2003 Server,and used MS SQL as OP7's Database,when I add swithces I meet a serious problem. I added a cisco 2950-48G using 10 mins,I found that OP7 needs long time to add it's ports,then OP7 returns "add successfully".Meantime I check "task management",there only sqlsvr.exe using 45%-70% CPU and 201M memory. It's very slow,add a switch needs 10mins.I have 52 switches.So,how can I do to solve this problem?? Waiting for your reply?? system configuration: 2
Domain Controllers not available using Quick Config Wizard
Hi, Currently trialling the product. Looks good so far. I'm trying to use the quick Config wizard to add monitoring of Backup Exec service to all of my domain controllers, but none of the systems in the "domain controllers" category are available to add. If I manually move a server into another category, it appears in the list. I have 17 domain controllers I want to make bulk changes for but can't without moving them. Any clues please? Trying : Quick Config Wizard -> Associate a new service monitor
new template cannot be opened after addin custom WMI monitor
Create a template add wmi monitor via bulk Change monitor from SNMP to WMI update graphdetails set protocolid=3 where graphid=xxx Can not get back into template change protocolid=1 Can get back into template
No email notifications in Opmanager MSP
Hi, all email notifications have stopped for all probes, all clients. Where can i start to troubleshoot this?
Cannot add SNMP resource monitor
Hello, I had originally setup free disk space resource monitors on all of our servers. they were working fine until yesterday. They were saccidentily removed using the quick configuration wizard. When I try to add them back on now I cannot. I get an error saying "Unable to configure Graph". It will then add the resource monitors for the A: drive and E: drive, but not the C: and D: drives which I want to monitor. I have restarted OpManager but that hasn't fixed the issue. Any help would be great.
startup error in opmanager
When starting opmanager, the server aborts with an error: Error in initializing relational classes in Topology Module. Please refer the lo g files for more details Aborting Server Startup ... Process : OpManagerStatusProcess [ Started ] Process : AuthMgr [ Started ] Process : DataMgmtRPI [ Started ] Process : NmsPolicyMgr [ Started ] What is happening and how do we fix the opmanager and get it to launch?
ServiceDesk Plus integration
One of the advertised features of this product is its integration with ServiceDesk Plus, definitely a plus for me. However, it mentions one element being the ability to log a ticket, but I believe ServiceDesk Plus allows for tickets by e-mail, which means other programs could do the same. Not being overly familiar with either product I am looking to see how OpManager goes above and beyond this, can I assign to a group via an e-mail for example, or is this a benefit purely of using OpManager? Is the
Old OpManager 6 data
I upgraded to OpManager 7 a month ago and now when I try to get the old OpManager 6 data it says "No Data Available". Is there any way to get it back? Regards, Manuel
Monitoring Compaq Hard Disks & Fans etc
We need to monitor down to component level on Compaq Servers. ie Physical Hard Disks, Fans etc Has anybody done this in Opmanager MSP and if so how did you do it.
Remove inappropriate links from MSP edition for users
Hello, We would like to remove "jump-to" "about" "help" from the user lnterface of MSP as these are not relevant for them to see (for an MSP customer - it shows how many probes, managed devices e.t.c. we have) Thanks, Larry
Feature request - themes
Hi, Can I ask that the inclusion of themes is available in MSP edition please? The files are all there but a support request advises that themes are not supported in MSP (one is an ideal match for our corporate colours) so added as a feature request! Thanks, Larry
google map errors
Hi, We are seeing an error on the page when trying to click the location for a probe - this is a re-install of opmanager so the first probe we are trying to re-add - message is: "I" is null or not an object Anyone else seen this problem? - just not able to get the pin in the map! Thanks, Larry
Interface doesn't show up. General issue?
Hello In the past days i tried to discover the interfaces of my devices (server,switch,router) and most of the interfaces of the servers doesnt show up. I searched the forum and found many suggestions to solve the problem but nothing worked for me and i think there are many users with similar issues. I'm running OpManager 7 (Build 7010) on an Windows 2003 Standard Server, which is a virtual machine based on esx. The database im running is the bundled MySQL that comes with OpManager. Can you tell
Monitoring Cisco 851 and 871
Hi, I just installed OpManager version 7.0 but I am not able to monitor Cisco routers 851 and 871. SNMP is enabled, but the software can only monitor response time and availability, but not CPU and memory usage.
Rediscovering a Windows2003 server turns it into Windows NT!
Rediscovering a Windows2003 server turns it into Windows NT! problem occurs anytime you rediscover a w2003 server (2003 R1 and R2 both SP2). anyway we can remove the Windows NT template? I can believe companies still uses NT. lol
Russian names of SD categories in "Log a ticket"
Cyrillic names of ServiceDesk categories are incorrect (wrong encoding) in Configure Profile Details window of "Log a ticket" notification profile. The same is actual for cyrillic Prioritiy and Technician fields.
Disk IO
Is it possible to monitor disk io with op manager? Regards Stefan
User Import from windows active directory
Hi all, How do I import users from AD. Is it possible to authenticate against AD. Thanks Sumanth
exchange's Monitoring : the remote queue length
Hi, How can I monitor the remote queue length (the number of domains in the queue and not the number of messages) of my server exchange? Thank you, PYM
Printing Report from Device Snapshot Screen
On the 'At a Glance' report which is selected from the reports drop down box on the device snapshot screen - the layout of the report itself is such that whenever the report is sent to the printer (or viewed for that matter) the description field is cut off without telling what the actual interface is under the description column. For example - all of the rows under description will say 'Gigabit Etherne... or Dast Etherne..... but the important part of that field is the actual port number which is
Problem add ISA Service
Hi! I don't know how to add ISA service to monitor statistics and graphs. The server is added correctly. Please help me. Thanks
Auto Starting OpManager7 on RedHat Linux
I cannot find in any documentation or online a pointer that indicates how OpManager 7 is to be setup to auto start during a RHEL system reload. Usually, packaged systems install a startup script then register the script so the system admin may start/stop/restart using the "service" command. Do I need to create my own startup script, or is there one available that i have simply missed? Thanks
Next Page