command sudo
Hi, I'm connected with a solaris device by ssh (without command login and passwd prompt). I would like to create a custom monitor with the command: sudo iptables -L -n | wc -l Can someone tell me how i can do? I tried to create the custom monitor. As the command sudo needs a password, I put the correct password in the field prompt password in the link password of my device. But the monitor returns the value 0. I think the problem is the password needed by sudo and not the custom monitor. If necessary
How to (if possible) make a Trial Probe to become a Register
Hi Was doing some testing whit extra trial probes and i now need them as Registerprobes. I ordered new licenses from david to day. Is there anny easy way to make these probes Registered ones? Whit my new license. Becurse if i make new probes i cant use the name that i used on the trial ones and i need to do lots off configuring.
Device already present in the system
Getting error message "Device already present in the system" but I searched for the IP in Opmanager and it does not exist. I am running Opmanager 7 with build 7027.
Event Log Rule - Alarms
OpManager 7 build.7023 We created an Event Log Rule monitor on a server. An alarm was triggered and I was sent an email but nothing appears in the Alarms view. And since there is no way to clear the alarm I get an email alert ever 15 minutes. This is what I see; Currently there are no open alarms for the Device How do I clear the Alarm?
Specific Linux Cpu Monitoring to graph
Helo, im trying to create a custon linux monitor that shows the iowait, system, and user cpu of my RHEL40 servers. But im not able to add the monitors after add them to the hostresource.xml and opmanager_graphinfo.xml Example for wait cpu : Hostresourece.xml <CATEGORY ID="Wait CPU Utilization" command="top b n 1 | grep -i 'Cpu(s)'" parseAll="false" description="Percentage of CPU used is monitored periodically and displayed."> <ENTITY ID="WaitCPUUtilization" applyThresholdOver="curValue" threshold="Th6"
alerts when data not collected
Hi Is there a repotr available, or better still can you point me to the correct MSSQL table to find when a device hasn't polled e.g. C:\ snmp partition details not collected for last 3 tries. We do have occasions when snmp stops retrieving data and this would be a good way to spot them without having to go into each device? Many thanks
How do I monitor a process
How does one monitor a process in OpManager? In this case I am trying to monitor Syslog.
WMI Problem
I've been struggling with this for a few days and just can't seem to get it to work. I had a few set up for this but we lost a drive and I lost all of my scripts and I have to recreate them. Basically just a script to see if a process is up. It works from the command line but when I test it I keep getting "The Monitor did not respond to the test request" OpManager version 7 -------------------------- From the command line I get: C:\Program Files\AdventNet\OpManager\conf\application\scripts>cscript
SMS using usb attached mobile phone?
Has anyone had any luck using a mobile phone connected via a USB cable to be recognized by Opmanager? I have tried all the troubleshooting tips in the KB but nothing seems to get it work. I know that the phone I am using is not on the supported phones list but I figured I'd give it a go anyways. Opmanager just refuses to recognize it. Changing baud rates and com port settings don't help either. Just wondering. Thanks! -SAm
Custom monitor using SQL query
Greetings, I'm trying to find out if we can create a custom monitor in OpManager using a SQL query against a MSSQL database? Thanks, Steeve
How to take the mysql dump of opmanager msp edition
I am not able to take the mysql dump of opmanager msp edition .Actually i am not able to find the mysqldump in mysql dir inside the Central.I am using the Linux Box. What i have to do to take the mysql dump.Give me the steps to get this dump lokeshkumarn@aim.com
Proper setting for traffic counter
When adding devices to OpManager, some are added with the traffic counter set at 32 bit and others are at 64 bit. What is the proper way of setting this option? Does it really matter? This happens on devices from the same vendor, same model number, with the same version of firmware.
Cache Hit Ratio(SQL 2005 Server) Monitor
On our SQL2005 servers we cannot see the Cache Hit Ratio(SQL 2005 Server) monitor under Cache Monitors, it's just not being shown. We cant change the threshold value or disable the monitor. It keeps generating alarms.
Can't Open Custom Monitors!
I added a few custom monitors, then later decided to drop a couple. So I deleted one, and when I deleted it a page that says "Error!" appeared. Now whenever I try to go into the Custom Monitor page it gives me the Error page and I can't add any monitors. Also, in the error logs I get a Java NULL pointer exception. Any help would be great, thanks.
dear ramesh...no display.
dear ramesh I'm followed. first. add monitoring -->checked cpu utilization, memory utilization etc. snmp is check. second. screenshot chenck. but, no display. give me a next step notice.
Test Credential CLI failed
Hi, CLI credentials tests, except one, are failed. However, logins and passwords are corrects and i can be connected on devices with putty. someone can help me?
Change the IP server
Hi, I need change the IP Server. I am using OpManager 7.0 with Database SQL 2005. I did a change the IP Address in the server, but OpManager doesn�t work. What recomend me to do in order to OpManager will work fine? Thank & Regards I. G. Delgado Especialista :o
Device templet bug.
When you add a new monitor to the Device Templates, such as Disk Usage, it will remove any manually added performance monitors and remove all the thresholds. The test. Added a monitor to a Linux(Any device works) Server (Delivered Mails) Went to "Device Templates" --> "Linux" and add "Disk Writes" "Apply" to all, the default. Go look at my Linux server. The "Delivered Mails" monitor is now gone. To make this work, all the Thresholds are gone! Is this just me? Can any one else replicate this.
Discovering SNMPv2 devices
we are having a hard time discovering SNMPv2 devices with OpUTILS 5, It does SNMPv1 no problem. When tryng to discovering v2c devices, OPutils just sits there. gengg
Firewall Analyzer reports only show VPN clients
I have successfully integrated Firewall Analyzer (FA) as an Add On to OpManager. However, when I view FA reports for particular servers, the only clients that show up in the report are VPN addresses. In addition, I think the client IP address and the associated user for each record is incorrect. As added information, in Firewall Analyzer I have two Intranet IP addresses listed, our internal subnet as well as the VPN subnet. Any ideas?
Error when adding a device
Hi, When i go to add a device into opmanager i am recieving a strange error. When i go into admin and then into add device. i enter the name of the device and then click Add Device. OpManager then comes up the top with an info message saying Device already present in the System So i try and search for the device name. and i get the following message No results found for pc626 and it asks me if i want to add a device. We are currently stuck because i am unable to enter this machine, and we want to
Cannot start OpManager
Hello, am using RHEL5. i've installed OpManager7 successfully. but while trying to start OpManager (./StartOpManagerServer.sh) i get the following errors at first: cp: cannot stat `/opmanager/OpManager/apache/ssl/backup/ssl.conf': No such file or directory The File: /opmanager/OpManager/apache/ssl/ssl.conf does not exist inside addon check tables are created, processes start, then i get the following error msg: Verifying connection with web server ... Failed to establish connection with web server.
No CPU, Memory etc....no display.
Dear opmanager-support answer. thank you.. test credential is snmp passed but, no display cpu, memory etc. Your answer did followig but, no answer help.. have a nice day!
Templates Problem
I have a Zyxel MIB file, I uploaded it in OpManager. How do I convert it to template? Also, I created a template for Zyxel with correct OID, but OpManager still failed to identify the Zyxel switches correctly. They are being identified as desktop. I have to manually change them to Zyxel. Also after changing them to Zyxel switches, Opmanager is unable to rediscover interface and I have to reconfigure the password to one of our SNMP keys - again - manually. We have over 500 switches, is there anyway
SMS Port Number
Hello. We attempted to connect a USB cellular modem for SMS, but it did not work and we uninstalled it. However, under Admin>SMS Server Settings it is still requiring a PORT NUMBER to be entered or it will not save the setting (error box: �Please enter the port number�), and obviously, we can�t enter a port number because the modem is no longer attached. How do we remove the modem in OpManager build 7027?
Availability reports
Hi, I'm trying to produce availability reports for our SLA's and i was wondering if opmanager can do reports for just our service hours. I'm trying to do an entire year but just between 8am-6pm and all i can seem to do is 8am on 1/1/07 to 6pm 1/1/08 which i assume is the full 24hr periods in between. thanks.
AutoLogin and business views
Hi, when I use the autologin feature (see knowledgebase article below) for a read only account in I cannot see the content of business views (It just says ???????????????). However when I logout and then login interactively with the same guest account business views just work fine. This behavior started in V7, V6 was fine. I really only need the business views working for the guest account :-( http://support.opmanager.com/sd/AddSolution.sd?solID=6606 Thanks for your help Dirk
OpManager doing 300+ gets, ever min!
I had to check this one for my self. about every 3 minuets our OpManager server (cornfield) will hit an system that it is monitoring (coldspark, in this case) with 300+ requests. I only have 4 monitors running, all the default ones for Linux. This is what I am seeing coldspark log # tcpdump | grep snmp tcpdump: verbose output suppressed, use -v or -vv for full protocol decode listening on eth0, link-type EN10MB (Ethernet), capture size 68 bytes 11:31:00.185027 IP cornfield.32823 > coldspark.snmp:
SNMP not monitoring all Local Disks
I have a 64bit windows 2003 server that i have the free disk space in MB monitor turned on in OpManager. Opmanager is only displaying 2 of my 5 disks. Anyone have any ideas as to why this is happening. Also getting an error on the top of the page when i add that monitor that it is unable to draw the graph. Thanks Mike
Monitoring VMware environment using OpManager
Can OpManager be used to monitor Vmware environments and the server itself? Please advise how this can be done. Thanks
Unable to get the Memory graphs
Hi, We are setting up OpManager 6 build 6016 . And successfully configured solaris, linux and windows clients. However, for HP-UX servers, unable to get the Memory. Getting "-1" error. We want these details using CLI. Please advise. attach output of OpManager and graphic. TKS
How-to get an overview of thresholds and notfications
Hi there, i'm totally confused by my alarms and notifications. First i have roled out a notification profile for a group of servers which some rules. Sometimes there might be some changes on only one or two servers, which have additional services to observe. But when run the Quick Configuration Wizard again, changes are not additional but everything is deleted and decisions you've made before you must do completely again. Therefore i have to check other servers to see what i had ticked before. Not
How do I get a custom monitoring value (OID*0.01)
Looking to take the output from a monitor; to be exact, the Linux load value ".1.3.6.1.4.1.2021.10.1.5.2" and times it by 0.01 That value is an Integer, 9 for example. But the current load is 0.09. So to correct that problem I tried using the following for the SNMP OID: (.1.3.6.1.4.1.2021.10.1.5.2*0.01) Which failed. Is this possible?
i'm problem is no display!
hi i'm want solution.. device : notel 2550T problem is no display. The screen is displayed OS name and device name. but, no displayed cpu utilization and memory utiltilization and notel device is enabled snmp i'm tested add monitor....cpu utilization (snmp, CLI, WMI) but, no display add an attachment....log file help me...
Inventory scanning.
I've installed OpManager MSP as a test on a newly installed 2003 server and added this server to our internal network. Have enabled SNMP on all the devices. On some devices SNMP is working (the blue star is there) but others don't. I'm also not able to run a software inventory, hardware inventory, etc. on any device Reason is that according to the system "Selected asset is not scanned yet". Any idea on how to scanned the assets? Thanks in advance. Paul
HP RAID drive status
Hi there. Can you please tell me how I would go about monitoring in OpManager the status of HP RAID physical drives? as we would like to have that included in the OpManager servers views. We have purchased the MSP edition of OpManager now and although not yet live, most of our customers have HP servers, as well as ourselves, although we can use the HP management software, we would like all the information integrated into OpManager. I have loaded the cpqida.mib file which gives me the support for
add new custom CLI monitors
Hi, I'd would like to know how i can add a new custom CLI monitor. When I add a new monitor, I have to give an OID but I don't have snmp on this host. What can i do?
Unable to access jarfile. \classes\OpManagerStartupClasses.j
Hi, Wonder if somebody can help me with an installation problem I have with ManageEngine OpManager 7. If i run the wizard it gives the following error during the installation: error while i18n It then does not extract all the files but creates the folders. If I extract the files manually running the OpManager.exe file and try to run ManageEngine OpManager 7 the following error occurs: Java Virtual Machine Launcher Unable to access jarfile. \classes\OpManagerStartupClasses.jar I am running the latest
Unmanaged Networks in Opmanager 7
When I was using Opmanger 6, I had some networks I did not want to manage at that time. I used the web interface in network discovery to unmanage these networks. I have since upgraded to Opmanager 7 build 7024 and I would like to manage some of these previously unmanaged networks. I can't find any way to manage them again like I could in Opmanager 6. Is there some menu choice to manage these networks again?
Apache Log file
The Apache log file on my machine has grown to 20 GIG, how do I purge that down?
Next Page