the tutorial of desktop central 7
have you the tutorial of desktop central 7? please reply.....
Suggested features for Desktop Central
Features we would like to see in a future release :- 1. Ability to apply patches now, not have to wait 90 minutes or for the user to logon. 2. When deploying patches to a group of computers and several fail you cannot remove those computers from the patch configuration. If you could remove the users it would stop them retrying a process that has failed. Editing the configuration results in it being redeployed to all machines, including those that succeeded. 3. Restart options after patch install
the tutorial of desktop central 7
is anybody have the tutorial of desktop central 7? please reply........
Wake on LAN Does not Work
after I tried to Wake on LAN, the process is "Wake up process has been started. [total: 1, Successful: 0, failed: 0, remaining: 1] does not work because the client computer is not alive
Different Patch Severity on KB2347290
Dear Forum According to Microsoft Security Bulletin MS10-061 (http://www.microsoft.com/technet/security/bulletin/ms10-061.mspx) on KB2347290 for Windows 2008 server the severity is important. But why in desktop central the severity is set to Critical ? Thanks and Regards
USB Policy: Instead of Block and Unblock, Is it possible to do Read-Only and Read/Write
USB Policy: Instead of Block and Unblock, Is it possible to do Read-Only and Read/Write?
Change Workgroup name
HI, is possible to change workgroup name from Desktop Central 7 to selected Pc's? Regards Stojan
OU report for any usernmae has been lock
Any idea how can i get teh report when the user has been lockut and send the alert thru email?
Memory leak in Desktop Central Agent
I have noticed that the agent program dcswmeter.exe is consuming large amounts of memory on some of our servers. Restarting the service returns the memory usage to a sensible level. The memory used has been between 1GB and 2GB on some servers which obviously has a knock on affect on the server performance. I have seen this in both Windows 2003 and 2008 servers. The agent version is 7.2.16.
Report using OU
I would like to ask about Report using OU. I couldn't find report related to OU in almost every report. For example Reports > User Reports > Disabled User Account, i want to use OU to filter every department in my office, but i couldn't find one. Also in Custom Reports if you select any "Select Sub Module:" there isn't criteria related to OU and i thought is not very useful :) Thanks
Missing Windows 2008 patch in Patch Management
Dear Desktop Central Forum I would like to approve patches at Patch Management and i've found some patches that i have already download is missing or not appear in Applicable Patches & Missing Patches. How can this happen ? Windows6.0-2008-SP2-KB2286198-x86.msu Windows6.0-2008-SP2-KB2485376-x86.msu Windows6.0-KB2296199-x86.msu Windows6.0-KB975558-x86.msu Why in the Downloaded Patches section button "Mark as" not appear ? because i want to approve immediately every downloaded patches or is there another
Patch deployment configuration
Is there a way to change the default settings of a patch configuration job please :- 1) "Force Reboot when the user logged in" (default) to "Allow user to skip Reboot" 2) Put a tick in Deployment Progress for "Show deployment progress in the client computers" (default is un-ticked) Thanks, Simon
Patching mechanism
Hello, I have a question about DesktopCentral's patching functionality. I read the documentation but it did not give an answer. If I deploy a patch configuration to a client with 100 patches, but the client only needs 5 of them, how many patches will the client download? Will the client download and attempt them all locally, or will it know which patches it needs from a configuration and only download those?
Great program.
Without a doubt, this is one of the greatest pieces of software I have ever used. Keep up the great work, ZOHO Corp!
There should be an update button.
A button that checks for updates to the program should be available, unless there's one I don't know about.
Uninstall of My Web Search Bar
Hello, Has anyone been able to setup the MyWeb Searchbar as a restricted software, and automatically uninstall it?
Running a Pre Installation Script
Hi We are currently evaluating DC and wondered if anyone could offer any advice on what hopefully is a simple task! I have created a package - .exe install with a silent switch, and this works fine. The next step i want is some kind of prompt so that the user can confirm to proceed or not. We currently deploy some software via login script so that the user receives a choice of Y to proceed, N to cancel depending on whether it is convenient to install the software. This is done by calling a simple
Deactivate Inventory scanner and delete agent log files (and some other questions)
Hello, sorry bad english. We have some problems with our new Desktop Central 7 system. At some servers the agent and the services need many memory. Up to 1 GB RAM for the inventory scanner. The inventory logs in the log folders are more then 100-200 MB big. Can I deactivate the inventory scanner? Or can I define areas on the local computer that the scanner don't scan? The system recieve many datas from other locations, transfer the data into a new format and send it to other system. All this transfers
Nested Software Deployment
We are looking at migrating from Novell's ZCM 11 to Desktop Central but there are some issues that are still nagging me. For example: 1. We have Application A that has requirements 1,2,3 and 4. How do we install 1,2,3, and 4 before Application A? 2. We have an Application that has had updates and a MSP file released for it. How do we install the MSI and then the MSP in one operation? A quick check tells me that I could use MSIEXEC in a post install script but that is very messy. I would like to see
Error:
Hi When i am installing desktop central Agent on to some desktops,i recieve the following error "Unable to update agent status.Operation timed out". I am running DC build 70220 on windows server 2008 R2. I have deployed agent on some systems but some are giving me an error
Scheduled Reports return buggy/empty attachment
Hi there, I'm playing around with scheduled reports at the moment and have found that two of my reports don't work. The report "System Uptime Report" should email a report in PDF format, as an attachment. I received the email with the attachment, but the file is only 306B and is unable to be opened. Adobe Reader says the file is either not a supported file type or the file has been damaged. I have run the report several times, each time encountering the issue with it. I changed the schedule to send
Sender E-Mail Address
Build No : 70221 'Sender E-Mail Address' for Scheduled Reports always stays admin@desktopcentral.com. Fields in Mail Server Settings seem not working, whatever I put in 'Sender Name' or 'Sender E-Mail Address', emails are received always from admin@desktopcentral.com. For [Send a Test mail] everything works properly. Sender address is always custom. Last verion where custom sender address was working properly for me, was- No : 70114
Software Metering, disable on client
How can I prevet the client application from metering software usage. Our 600 German users have raised a legal objection that such metering is illegal as it constitutes performance appraisal. Need a quick answer or they are going to force me to uninstall the application.
Performance Issues with Remote Control
Hi - I looked for other forum posts on this and the only one I led to a dead link...... We are trying to use Desktop Central for remote support of our 8 branches, but the performance of Remote Control is really slow - terrible lag. There are a few machines that I use VNC and Logmein to access and the performance on these products is significantly better. Is there anything we can tweak to improve this? I would like to have Desktop Central be the single source solution for remote management. Thanks.
64 bits
I have a windows 7 64 bits... and in old messages I read that Desktop Central don´t support the 64-bit Operating Systems. Exist agent for 64 bits ??? o not ? Thank
Custom message for configurations
When running configurations we always customize the message displayed to the user when permitting them to cancel the restart. How can we permanantly change the default message so we do not have to constantly retype it? Thanks!
Bootup Time
Please add Last Bootup time in the Computer Inventory. This would help allot.
Deploying Flash Player 10.3.181.14 on Firefox 4.0.1
Hello, I have 5 clients that have Firefox 4.0.1 installed on them. Last week Adobe released the new Flash Version 10.3.181.14. Those 5 machines were set to be patched from the old 10.2.159.1 version to the new 10.3.181.14 version over the past weekend. Well instead of being patched, DC said that the patches were not applicable to the target when n fact they were. My other 14 clients that are still running Firefox 3.6.17 all were able to be upgraded to the newest version of Flash Player. It appears
"Interactive service detection" Error on software deployment
I have installed desktop Central 7.0 on Windows server 2008 and i am managing windows 7 desktops.Whenever,i try deploying a software,"interactive service detection" pop up window is thrown.What should i do to install the software properly on windows 7 without this error?
How to know the memory type and frequency of client PC?
I want to know the RAM/ memory type (i.e DDR1/ DDR2 etc) and its frequency (533MHz/ 667MHz etc) on the client PC on which Desktop Central client is installed.. Please advise on how to view the RAM type as well as RAM frequency of the memory fitted in client PC such that the details are visible in the central console.
Allow specific USB pen drive only in Desktop Central
I have downloaded Desktop Central to manage USB devices. Is there any way by which I can allow particular USB pen drive only to connect to laptop and any other Pen drive should be disable?
Desktop Central Newsletter - May 2011
Hi All, The product newsletter for May 2011 has been sent out. The newsletter has the details of latest enhancements and bugfixes done in the last one month. You can update your installation with the latest hotfix available in our website. You can also see the latest features that are currently under development from our roadmap. Thanks, Ananth
Groups not updating
I'm having a bit of a problem; I wanted to deploy Office 2010 to a set of computers defined in a AD Security Group. Problem is, when I apply a configuration and assign it to that group, it just uses the members originally in the group. That is; if I add computers to that group, it won't reflect in DC; and consequently nothing happens. Same goes for custom groups. This can't be by design? If it is, it's a huge flaw. I want to be able to add computers to predefined groups, and they'll get the software
Manage PC's on remote network
I am trying to manage computers on a public network. I have installed a second nic on my DC and have configured a static ip address. I push the client to the workstation and everything seems to work, but when i tell DC to scan the client, the scan fails. The communication between the two doesnt seem consistent, sometimes i can ping the dc and at other times the ping fail. Am i setting this up incorrectly? I also tried configuring the wan agent with the new ip address of the second nic and i get the
Client PC File Search?
Can I use Desktop Central to search client PC local drives for a certain type of file and report on the findings? Specifically I want to find out which PC's have Outlook PST files (*.PST) stored on their local drives.
How do I access Desktop central without having to remote connect to server?
I would like the ability to connect to Desktop Central from any computer on the LAN but I find I can only do it by remote connecting to the server and running it through that. I have tried the following: http://dc-01:8020 http://dc-01:8383 http://192.168.0.3:8020 http://192.168.0.3:8383 But none of these work also tried with https Anyone have a clue or am I being stupid and the answer is easy.
Web Console
I was wondering if any one could tell me how to access the web console from my local computer. I had to install the OS on my computer and now I’m no able to access it. Thanks you for your help in this matter..
Reports
I am trying to create a custom report that searches all computers that have two different software installations. For example i need to find all computers that have openoffice and microsoft office installed. When i run the query for openoffice--- starts with openoffice, by its self i get the results i need. If i run another report for Microsoft Office 2010 by itself i get the results that im looking for. If i put the two queries together using "and" the results are blank. I need to see all computers
Lotus Notes
We are currently a Lotus Notes office and 50% of the office is on 8.5.1 and the other 50% is on 8.5.2. We new users with Desktop Central and we are looking for a way to push the upgrade out including Fix Packs. I have found steps on ManageEngines website that involve using 7-Zip, but I have not been able to make it work. Does anyone out there have these programs and might have a possible solution? Thanks!
Installing Fonts
Is it possible to remotely install fonts using Desktop Central?
Next Page