Computer Inactive Reports - not accurate
Support When I generate a report of Computers that haven't logged on in the last 30 Days (Inactive Computer Report), the Software goes and checks each Domain Controller. O.K so far. I am then presented with a list, which contains some Computers, which I know have logged on and off in the last 30 days. For example, in the list are computers which show the last logon time as May 07, and yet, they were logged onto this week. There is clearly something wrong with this report, and I have no confidence
Device already present in the System (Build 7010)
Hello Yesterday i wanted to add one device to the opmanager. After adding the device OpManager said everything went fine but as i wanted to take a look at the device opmanager didnt find it. So i tried to delete the device with a prepared link (copied the delete link from another device of the same type, changed the name and called it in the browser). OpManager said that the removing of the device was initalized. After about 30min i tried to re-add the device. Now OpManager gives me the error " Device
Personal Firewall Can Either Help And Hinder
One of the key elements in a layered defense strategy is a personal firewall on each computer. You need to protect each computer on your LAN from hostile Internet traffic, and sometimes, from hostile traffic coming from other computers on your LAN. Unfortunately, if you don't setup your personal firewall properly, you can have problems......next :roll:
Specific connection time
I'm using Firewall Analyzer to monitor VPN traffice on a Cisco VPN Concentrator. I need to see the exact time of connection and disconnect of several users. So far I've only been able to find the duration of the connection. Is there a report that can be ran to display the specific connection and disconnect times?
Advanced search does not return any data
Hi I am trying to run the advanced search in firewall analyser and never seem to get any data returned. I know that data is there, as i can access similar information via different predefined reports such as top protocols and so on. I have defined protocol groups and entered this in but get nothing, similarly I have tried single IP's or ports such as 6000/udp but again I get nothing. Is there something i'm missing? Thanks
Report Problems
After the migration of to the new version. We are not able to view reports now, it says no data available. Do we need to do something here?
Technical Support -- SQL Database Monitor
I am trying to monitor a SQL2005 DB with Applications Manager and everything appears to work until polling starts. I get this message "Problem in collecting data for the current status of MSSQL server. Refer Troubleshooting" and no data is returned. I am using the sa id/pw to monitor and the database is set to mixed mode. I monitor other SQL2005 and SQL2000 DB's with no problems. I set a trace on the db to monitor failed logins and this is the message that is returned when I set up the monitor, "Login
Setup help
Hello I have been evaluating the firewall analyzer for a week or two and so far I like what I see, but there are some features I think I am missing. First off, I am running an ASA. The syslog messages are sent to a host on the inside. I have configured the local LAN address as Intranet. I am only seeing "IN" traffic, no out traffic on the live event logs. Do I need to configure more than one interface? In addition...all of my traffic is being classified as "unclassified" even though I'm sure there
Domain Scan port# neededto enable scan on local workstations
Tech Support, We are adding new workstations to our network and are having issues when trying to scan the PC's for inventory. Firewalls are enabled on all of our new workstations coming in due to a new company policy. Can someone provide me with details or port number to enable on all new workstation firewalls so the inventory process can complete successfully. Thank you, Mid-Michigan Network Solutions Support Team
I need reinstall sdp
Hi, I need help , I need install newly sdp previously I had installed sdp trial version but finish test time, now how install newly the trial version if the files old are in the hard disk. I can not delete. What I need do for fix?
v7 - What counts as a node for licencing?
Does the asset state change licence count at all? Ideally changing an asset status from In Use to Expired or Disposed would remove it from the node count so the asset register and associated incidents and problems retain thier integrity. Regards, Andy
Build 6000 backup "Hangs"
I upgraded from 5507 to 6000 and did it with no issues. I wanted to go to 6013 however, I cannot get a the backup routine to complete. It hangs just past the 50% mark. I left it there for almost 30 minutes with no movement. Application and MYSQL are running fine. I have the backup for 5507. Thanks Tom
OpManager 7 does not find network
OpManager 7 does'n find network if i try to discover range, like from 10.15.0.0 to 10.15.0.255 mask 255.255.0.0 Network 10.15.0.0/16 does not appear on the net map.
Exception errror while opening a page under <Assets> t
HTTP Status 500 - -------------------------------------------------------------------------------- type Exception report message description The server encountered an internal error () that prevented it from fulfilling this request. exception javax.servlet.ServletException com.adventnet.client.view.web.StateFilter.doFilter(StateFilter.java:51) com.adventnet.authentication.ContextChangeDetector.doFilter(ContextChangeDetector.java:100) org.jboss.web.tomcat.filters.ReplyHeaderFilter.doFilter(ReplyHeaderFilter.java:75)
Constant emails when technician set up vacation auto-respond
We are using your service desk plus 6 software as our in house IT ticket system. Recently, one of the techs went on vacation and put an auto response up on her email system. The system is currently in a loop where she keeps creating new tickets automatically. I could understand if she kept adding notes to one ticket, but she keeps creating NEW tickets over and over again (over 1200 so far since 4:30 today). I had to stop email fetching to get this to cease but I need to know how I can resolve this
Cisco IP SLA support
Hi, I seem to remember that Cisco IP SLA support was on the roadmap - how's it coming? I'm evaluating Crannog's ResponseWatch at the moment, and it's great - love those bullseye charts! Hope to see something similar in OpManager soon! alec
Tasks & PM Tasks -> Outlook
Hi, I test ServiceDesk actually in the company. We want to know if it is possible to get the assigned tasks & PM tasks in the outlook tasks. ServiceDesk can maybe send a mail with new task(s) attached and ready to be copied into outlook's tasks. Thank you,
Technical Support
Hi, I try your software and I would like to know what is the time during the monitoring of one process and if I can change this time. Thanks OSIOWSKI St�phane OSIOWSKI
Eventlog Analyser - Time Mismatch
Time Mismatch between 9 system(s) and the EventLog Analyzer server I'm running Eventlog Analyser trial. I'm using suse linux. I'm gathering logs from windows hosts using snare. When I happen to enter the server I receive this error: "Time Mismatch between 9 system(s) and the EventLog Analyzer server." But it seems that all the logs are where they should be, and the servers have their time clock sincronized. What should I do to get this error message out?
Upgrade from 6005 to 7010 Issues?
Hello. I'm having issues with all our monitoring after the upgrade path. The problem we are experiencing is that when there is a troubled circuit we get paged/emailed, but when the circuit clears we will get paged sometimes on lines but not other times. I have made sure that the notification is setup to notify us when a line clears. To give everyone an idea here is what we have Op setup to do. We monitor our T1 circuits which have Cisco routers on the other end for errors, line down/up, etc. When
Missing Items on Business Views
Hi All -- I wonder if anyone else has had a problem with items disappearing in Business Views? After upgrading from 6 to 7 all views were in place and correct but recently I've found a couple of views missing items. The only thing that has happened is a couple of sub-network scans occurred. Your help and insights are appreciated.
Standard (non-SSL) port for OpManager 7?
I am evaluating OpManager 7 and I would like to enable access to the web interface via regular HTTP in addition to the default SSL configuration. I could not find any reference to this in the user manual, only how to change the listening port to something else. Is it possible to enable HTTP, and if yes, how? Thanks in advance, Virgil
Cannot delete host created
I cannot delete a windows host I added to LogAnalyzer. I tried deleting it using the red X, I've also selected the host from the home page and hit the red X. It confirms the deletion. but if I go to another screen say like other hosts it is there again. I click on the home button and it is still there. I've tried loggin out after I deleted it and back in, still there. I've tried to delete everywhere I see it and then when I try to readd it says it still exists.
OPS Manager unable to detect the Itegno SMS modem
Hi, I got a Itegno vm1080 modem.. But the SMS server settings is unable to detect it?? why?? the modem is in good condition as i used it with other software
sd Plus addon not working
I am running 7010 opmanager and i can go to admin addons and configure sd plus and run the connection test is all fine. But then i go to a computer and click on ihardware details i get the following error. So the test is good i am using sd plus everyday the server does exist in the sd plus inventory. Unable to fetch Hardware Details from ServiceDeskPlus. Possible Reasons Check whether the device is added in ServiceDeskPlus Check whether the ServiceDeskPlus Server is running
DELL Switch Interfaces no longer appear after rediscovery
I am running OpManager 7 build (7020). Initially we had a DELL PowerConnect 3348 switch monitored with all its ports. By mistake the 'Rediscover' button was clicked in OpManager. Now the only switch interfaces that appear are the 6 LAG ports. When you click 'Add' to add the 48 regular ethernet ports it says 'Sucessfully added' but all you ever see is the 6 LAG ports. Can someone help out? Thanks.
reports
HI I am trying to set up a report that will run on the first on the month and will show the last months uptime for all server Monday to Friday 8am -6 pm How would I go about this?
mail monitoring
Hi, Is there a way to monitor all the "road" made by mails, for exemple, something like the ipmonitor POP3 QA, sending an e-mail with a smtp server, and looking then for this mail on a POP3 server, to check if mails are received successfully. Best regards, -- Guillaume
bug with alarms clear
Hi, When you select in Alarm tab to show more than 25 alarms in the page because you have more than 25 alarms and when you decide to clear those alarms, clearing process clear only 25 alarms instead all showed in the page. For example, you have 52 alarms, you select 75 alarms per page then you clear all, only the 25 first alarms are cleared, you must redo the same thing for the rest. Regards PCO
Cannot Delete Custom Report
Post subject: Cant delete custom report by "wchung " on Thu May 03, 2007 states an error while deleting a custom report, I'm having the exact same trouble. Below is the error , please help HTTP Status 500 - -------------------------------------------------------------------------------- type Exception report message description The server encountered an internal error () that prevented it from fulfilling this request. exception javax.servlet.ServletException: SQLException occured while retrieving
Configuring MIB
Hi, We need to monitor a Motorola PTP 58400 device using opmanager. The vendor has send us the MIB of the device. Can anyone guide me on how to do the configuration in opmanager so that this device can be monitored. we have an opmanager central server and 18 probe servers. I have put the MIB in the location D:\Program Files\AdventNet\ME\Central\mibs. We have an option named MIB browser in the probe servers. I tried to load the MIB but it was not listed. Am i missing any steps here. Can anyone guide
Special Characters Problems
Hello I have a problems when I open one Change or Problem and I write words with special characters. Example: altera��o (change in brazilian portuguese) On SD+ 7 Enterprise Edition, the "Change" or "Problems" show this word as alteração. Does anybody know how to solve this problems ?
Graphic in request stops other parts of SD displaying
This might sounds slightly vague, however here goes. A client of ours regularly sends in requests and their signature contains a logo. Initially this logo appears correctly, but sometimes once you reply to the message we have noticed that the reply and everything that would normally show below the original message is not there. These items include the conversations, notes and other items that SD provides. Looking at the original message again and the logo has been changed into a grey block. Go into
Change subcategory to item?
Is there any way to change a subcategory to an item under a different subcateory? Also, I had put in a request and had talked to someone about the fact that on one of my items, it is greyed out like it is unavailable for future use. However, when I try to edit it and uncheck "item not for further usage" it doesn't stick -- It just keeps going back to unusable. But I haven't heard anything back on the request. Has anyone else had this happen to them?
Can't access ServiceDesk web site with linux web browser
Whenever I try to access our ServiceDesk web site from a linux PC the browser just hangs. It works fine from Windows and Mac browsers. I even tried wget from the command line and that hangs too: **************************************************** dsegel@polonius:~ 7>wget help.shs.ucd --09:33:39-- http://help.shs.ucd/ => `index.html' Resolving help.shs.ucd... 10.2.1.2 Connecting to help.shs.ucd|10.2.1.2|:80... connected. HTTP request sent, awaiting response... Read error (Connection timed out) in
I wnat to get remote Server "CPU Utilization" with
Dear Sir : 1. in opmanager server "cmd" do "cscript cpu.vbs 172.16.37.106 Administrator chio123" I get data "CPU0 5" look picture 1 ==> http://img524.imageshack.us/img524/4087/33582802xe9.jpg 2. in "webclient.snapshot.password.changelink" set 172.16.37.106 server user&pass look picture 2 ==> http://img77.imageshack.us/img77/1866/75583688vc4.jpg 3. get "webclient.snapshot.testlinks.testresults" ==> "webclient.snapshot.testlinks.monitordown" look picture 3 ==> http://img166.imageshack.us/img166/3172/29612487zb3.jpg
Deleting a scheduled report
There seems to be a report that is sent out weekly to a client. The client no longer needs the report but I cannot find a way to delete that scheduled report from being sent via email. It does not show up in my list of scheduled reports either. I cannot access or edit that particular report task to even delete the email address. I'm looking all thoughout the 'report' tab but cannot solve this problem. Does anyone have a solution? Thanks Paul
Exinda MIB
Hi there, I'm trying to set-up OpManager to monitor our Exinda Network boxes. I've downloaded the MIB file off teh Exinda Box, however when i try to use it, it gives the following error: Error parsing MIB:Exinda-MIB Exception while loading MIB:Could not parse the file C:/Program Files/AdventNet/ME/OpManager/./mibs/Exinda-MIB The error occured at the line no: 181 ,column: 5. Only the base datatype and TEXTUAL-CONVENTIONs are allowed as syntax in the SEQUENCE construct. Invalid name (character comma)
Strange encounter pls help
Hi All, Netflow reported of "kazaa, skinny,nessus, soulseek" application in the network. I have also trace the IP address to the host but found no such application running. I did a check on AssetExplorer for all software installed in workstations and also did not found such p2p/security application listed. Can somebody please advise me. Or how I can confirm that this is a false alarm from Netflow. Thanks!
MSP Version - More than 10 Alarms on Homepage
Anyone know of a way to get more than 10 Alarms displayed on the Homepage, for those of us with higher resolutions and would like to see more at once? TIA akb
Next Page