3 Monitoring Questions/Issues
Hi there, Firstly, apologies for the length of this post! I'm running OpManager 7025 and have a three questions/issues which I'd appreciate some help with: 1. Is it possible to monitor Linux (net-snmp) machines for % free SWAP space? I've tried using "Swap Memory Size" (1.3.6.1.4.1.334.72.1.1.9.6.0) but the net-snmp machines aren't responding to this test - even still a % (or MB) free SWAP monitor would be much more useful. 2. I'm having a problem monitoring interfaces on Windows 2003 machines, the
Report Generation- Custom Reports (NOT Flexible)
In Custom Reports I can only generate report for 1 server only. How can i generate reports of 2 or more server in one view. Let say server1 and server2, You will see their CPU, Memory or Disk Utilization in Graph together, so that comparison will be easier. Will not have to generate report on each server then compare them. Im using OPManager 7 or your upcoming SP will address this. I think this is one of the weakness of OPManager, Report Generation is not flexible.. Hope you'll answer my concern.
CPU, Memory, Disk probes do not work
When I click on "Troubleshoot..." here is the helpful message I get: No Data Available - Possible reasons 1. The Performance monitors may not have been associated to this device. 2. Check if SNMP is enabled on this device. 3. If Yes, the Agent may not have responded to the SNMP request. Check if the Agent is responding using the Mib Browser. 4. If you have added a Telnet/SSH/WMI based performance monitor, check if the UserName and Password specified are correct. 5. If the device has just been added,
Device Info. (Additional)
Can you add on your future updates some additional information on Device Info. on the hardware information. Right now it only shows memory and disk size. Hope you can include processor type, processor speed, vendor etc. so that we can also use for the hardware inventory. Thanks..
SNMP using TCP by default, needs UDP for SUN 5.8
How do I switch SNMP to use UDP, instead of TCP? Not on the client side, on the server, OpManager.
Change Device Catagory casuses error
Hello, I added a couple of Cisco Catalyst 3560 switches, they were added as routers. I tried changing them to "switches" at which point I got a an "error" and the devices disappeared !!!. But when I went to add them manually I was informed that they already existed. I take it I need to delete them from the database (SQL2005 running in SQL2000 compatibilty mode) Can someone tell me how to sort this out so that I can re-add switches.
Why are SQL monitors in Windows 2003 monitors
When adding IO pages read monitor to a W2K3 device it turned out to be for SQL. mssqlSrvInfoPageReads 1.3.6.1.4.1.311.1.4.1.1.2.1.4 OBJECT. In fact there are lots of SQL monitors. Is this right. I really need Memory\Page Reads/sec for windows as this gives hard page faults.
Snmp confusion
Hello, I have OpManager running in a test environment for the past 2 days. I have some questions that I hope can be answered: 1. Am I supposed to turn off the Microsoft SNMP Trap Service? 2. The servers are running on Dell Equipment. I uploaded all of the MIBs from the dell support site. Not sure what I am supposed to do from there. 3. One of the servers is running Oracle. I know I can monitor the Oracle services. I would like to take this a step further and have opmanager execute a script to log
Monitoring Oracle Database
Can OPManager monitor Oracle Databases just like what you have in MSSQL monitoring. Will it be included on the service pack that will be release..
SQL Table for Performance monitors
Hi Can you tell me which table holds all the data for devices performance monitors? I would like to delete all the Virtual and Physical Partition % monitors for my servers and would be quicker to do this via the DB than going into the settings of every device? Thanks
Report NA
Hi, Recently I upgraded OpManager to 7025 only to find out that reporting for the last 30 days became unavailable (NA). The same for last month reporting. Anyway to resolve this? Anyway to generate email for availability threshold? Thanks.
Cisco 3400
Dear all, first i want to say Thanks for your great piece of application. the second i want to say that i have in my network some cisco 3400 switches and my problem is that there is no 3400 series device type in my version of OpManager ( version 7 build 7020 ) Can you please give me some advice or tell me if there will be an add-on or something like that ? ( I noticed that the monitoring is working ok using cisco 2500 switch type ) Kind regards,
Customizing Dashboard
Hi! I was wondering if I can customize the Dashboard in Opmanager (ver7). I think the view in OpManager 6 was much better since there you could all of the Business snapshots. In version 7 you have a More button. This is not a good solution since we want to see if a device goes down in which location (business view). Is there any chance this is coming in a sp?
OpManager broken out of the box
I just finished a default installation of the current version of OpManager, when I try to start it up I get these errors: [scarolan@aus02appmgr]$ sudo ./StartOpManagerServer.sh Java Home /opt/AdventNet/ME/OpManager/jre cp: cannot stat `/opt/AdventNet/ME/OpManager/apache/ssl/backup/ssl.conf': No such file or directory The File: /opt/AdventNet/ME/OpManager/apache/ssl/ssl.conf does not exist What's up with the missing ssl configuration files? Did anyone check this package before making it available
Failed to establish connection with web server/ with red hat
Hi!! At the time to start the server with "./StartOpManagerServer.sh" on red hat 9 I�ve the next problem " Failed to establish connection with web server" .... I've cheked the Group and user on the file httpd.conf and I tried to run the ./StartWebSvr.sh script, but I dont find it on the directory /opt/AdventNet/ME/OpManager/apache/ [root@localhost apache]# pwd /opt/AdventNet/ME/OpManager/apache [root@localhost apache]# ls bin conf icons lib logs modules ShutdownWebSvr.sh tomcat [root@localhost apache]#
All Servers Disk Usage Report shows 'No Data Available'
Hi, The All Servers Disk Usage Report shows 'No Data Available'. How can I resolve this?
Unable to clear SQL cache alarms (build 7025)
Well it looks like the patch to 7025 did not fully fix our problems with regards to clearing SQL alarms. We are still having problems with; - When an SQL alarm is acknowledged no problems are encountered - When the same alarm is 'cleared' we get a blank page in IE or Firefox and the only way to get back to OpManager is to login again. Of course the alarm is still present and has not been cleared. - We've noticed that when on certain SQL monitors setting the 'threshold' seems to have no effect. We
SNMP or WMI
Do i need to get SNMP and WMI to work before i can grab any information? i got a few windowsNT server which SNMP is working but the CPU, RAM and disk utilization is not able to work. how should i go trouble shooting if i am unable to get the utilization working??
Health Reports in OpManager 7
Hi, Would it be possible to make the Health (at a glance) Reports available in the Scheduled Reports section of the package. These reports give a clear overview of the current state of a business view or device and are ideal for scheduling and then reviewing to see if any pro-active maintenance needs to be done. 4NDY
Downtime Scheduler won't set machines back to managed
Hi, I am currently running a registered build of OpManager 7023. I attempted to create a new downtime schedule last week and accidentally selected an entire business view containing 200+ servers. This downtime schedule set all these boxes to unmanaged the next day. However, I was able to do a quick config and set all of them back to managed after deleting the downtime schedule that caused this. Everything seems to be fine now except the other downtime schedules work only partially. They are able
exchange monitor
hello, our AD and MSSQL monitors kick ass but the exchange monitor seems to be falling short. it only pulls a few statistics, and stamps NA on everything else. SNMP and WMI function fine, all other monitors / stats display as desired. please see attached. it seems the exchange monitor is not pulling some information or the server is not supplying it. any assistance is appreciated.
Probe
Hello there. I've been studying your Opmanager software. I've learned almost everything I need to know, except one thing: The probe. I cannot locate information specific to the network probe on your website. I looked at one deployment example and became more confused than ever. Perhaps you could provide a link to some detailed information. Or, could you perhaps answer a couple of questions for me? - Do you install one probe per client? - One per site? - What is it's footprint? Can it be installed
event log
hi how is the event log displayed when a event occurs. I have the event log set up on the seperate nodes.
Cant load my avatar here?
Any idea why I cannot upload this pic as na avatar on this forum? Some help please? <a href=googlehlp.com/photo.jpg/>Me in Mexico 2007</a>
Editing Trap Processor Props doesn't help
Hello! I receive SNMP traps from some monitored firewalls. If the trap comes up it has the status "Attention" but I want that the status is always set to "Clear" for this OID. I edited the properties of this trap but OpManager still shows the status "Attention" when the trap comes up. Am I doing something wrong?? I am using OpManager 7 with the latest Build #7025. Regards, Mok
Opmanager 7 issue
I am using opmanager version 7.I installed net-snmp on client machine and opmanager 7 on server machine.But when I called cpu utilisation from mib browser the error " Request failed or timed out. Response PDU received from 192.168.1.3 Error Indication in response: There is no such variable name in this mib. Errindex: 1" .All forums tell use CLI based authentication that will fix the issue,but no luck.Some told install oid for the mib,how can I do this or what is the exact issue and fix.Please advice
Memory Utilization Dials/Custom Monitors
Every 24 hours or so.. (maybe less) My memory utilization dials stop showing data. When I perform a manual test for memory utilization.. I get "timeout" errors. My resolution to fixing this..is simply restarting the opmanager service on the server running the application. The OS that is continuously causing this any of my hosts running "linux". Its like opmanager and my linux hosts..just stop talking to eachother on the memory utilization tests. Any curiosity why this is happening?
Opmanger no dial graphs
I am using opmanager version 7.I installed net-snmp on client machine and opmanager 7 on server machine.But when I called cpu utilstaion from mib browser the error " Request failed or timed out. Response PDU received from 192.168.1.10 Error Indication in response: There is no such variable name in this mib. Errindex: 1" .All forums tell use CLI based authentication that will fix the issue,but no luck.Some told install oid for the mib,how can I do this or what is the exact issue and fix.Please advice
Switch port monitoring for roll back.
Hey, Is there way to monitor and make OpManager notify that my Gigabits ports on the switches are falling back to 100 Mbps. Using Foundry and 3Com switches. Help need asap, me working on a deadline for a demo to the manager. Thanks & Regards, Shreeji
Regarding CPU,Memory & Disk Utilization
Hi, On both my servers & desktops i have my Snmp enabled but when i go on to Event log rules & click Test Credential option in it it says snmp & wmi failed.Moreover for what purpose this MIB Browser & Switch port mapper is used.on certain systems i do get the cpu & memory utilization while i dont receive data for disk usage...And on certain systems even when SNMP is enabled i dont get the data for CPU, Memory & Disk usage...Please advice
Multiple MIBS in one File
Hi Comunity, Does Opmanager Supports Multiple MIBS in one File?. Thanks.
opmanager 7 MSP
Is the MSP version of opmanager 7 on schedule to be released by end of February?
How do I add new monitors?
I know how to add a monitor to a system, but how do I add, make new, monitors?
Foundry Switch showing 66 ports
Hello, We have 14 Foundry Switches. The model number of the switch is FastIron GS648P. Three of the above mentioned switches in the OpManager Device Snapshot page shows port/Index number from 1-66 where it has only 48 ports with 2 optional 10G ports. Anyone can help with the probable reason for it?
Some basic questions
Hi all I am currently trialling OpManager MSP Edition Build 6005. This is being trialled on a business park of 25 units - each unit has a switch (24 or 48 port) with a fibre uplink port back to the 2 core switches. Current issues: 1. I am getting an alarm for every port up/down over these 25 switches...which is completely unnecessary. I would like to disable alarms for member ports while still collecting stats for them, and just have port up/down alarms and email notification for the uplink ports
Unable to fetch Asset Details from ServiceDeskPlus.
On OpManager build 7020. We can't fetch asset details from SD+ The assets are listed in both OpManager and SD+ and both the servers are running side by side -- we can jump back and forth between them. What conditions have to be met to have the assets populate in OpManager? I saw it happen once but couldn't repeat it ...
Windows Vista
Hi There Ok i am having a bit of trouble, i have 5 comps on a linksys router, 3 wireless laptops and 3 gaming consoles... I have a windows home serve i am running the OpManager on and all my stuff seems to be ok other then one comp running Windows Vista, My wifes laptop is running wWindows Vista and is working fine but my second comp that is running Windows Vista is giving me troubles. I keep getting these errors Status Date / Time Message Trouble Feb 27,2008 01:10:37 PM Probable device failure:
Ruggedcom Switchs 2100 and 900
Hello Comunity, I have made a custom template for my switchs ruggedcom 2100 and 900, without the MIBS (Becouse I don�t have it), and I have taked the OID of these switchs making on query to the devices IP address, well then I have pressed the create botton, then I have selected the devices that will use this template. I can made the above process without problem, but the problem is on the monitors, becouse the cpu, disk and memory (others too) does not work. And I did several test and I have got
Graphs problem on overview link and profile alert
Hi Comunity, I have problem when I make one selection on the windows service option in the profile alert menu. And too I have error when I start my sesion on Opmanager. These problem show it in the next attached pictures. Thanks for your support.
Locating certain tables in OpManager Database
Is there a database table key? If not, I am looking to retrieve some information from my database for a custom report. The report is going to use the OpManager database to look at downtime of individual sites throughout the state. We have added a field in the device notes for each of our routers for us to keep track of the ISP. I am going to need to be able to retrieve which sites have which ISPs and relate that to the downtime. Another thing that I need is the text that I am inputing into the reason
Next Page