ttl Expired and device is up in Opmanager
hy guys! Some devices are unavailable (category routers) are up in status, although they are down. When do I make the Ping Test the devices reported that the ttl has expired. Status should be down in Opp, but this does not occur. some idea of what might be happening?
raj
is it possible to integrate desktop central with manageEngine opmanager
MS SQL issue since upgrading to 8050
I just upgraded to 8050 and afterward all my MS SQL monitors are gone. Every server I had the monitors setup on shows the monitor dashboard but all the monitors are gone. I added the monitors back for my main cluster but most of them are now showing alarms. Here is one of the alarms.. Average Lock Wait Time is 837541 ms, threshold value for this monitor is 2048 ms Before the upgrade all the monitors were fine. Not only did the upgrade remove all the current monitors and make the new ones way off
Juniper SRX Support
Juniper is phasing out the SSG netscreen line, and replacing them with the SRX line based on Junos. I can provide access to a SRX firewall to add the out of box support. Thanks in advance, Sean
WMI event monitoring
I have a .NET application which publishes WMI events, performance counters and configuration objects. Is it possible to configure OpManager to interface with these? (I could not find any reference to this in the user documentation). Thanks in advance for your help. Andy
Router changed IP - unable to rediscover interfaces
Hi, We've recently had to change the primary IP address of our core Cisco router to fix some QOS issues. This then caused the device to appear as not available. I changed the IP address and now I can see Availability, CPU, Memory, etc but on the listed interfaces I'm not getting any traffic or utilisation like I was before the IP change. I've tried to do a rediscovery on the interfaces but I get the error "Unable to rediscover the interfaces. Check et, etc". SNMP is working I would assume since I'm
Problem With Alerts!
I am using Opmanager Version 8 It is showing sites as active Monitoring Interval is 5 mins If i try to ping the site , The results that I am getting are Reply from 10.63.0.1: TTL expired in transit. Request timed out. Request timed out. Request timed out. what is the difference between alerts Probabale Device Failure and Device Down? Can someone please help me ASAP?
OPmanager8 not receiving syslog from solaris10 server
Hello all, I have a OPmanager8 configured on a Windowsxp machine monitoring several devices including some solaris10 servers, I have configured the solaris10 to send the syslog to my Opmanagermachine, however I can´t capture anything am I missing some configurations steps ? Here is ther proof that solaris10 is sending the syslog. publica -> cam SYSLOG C port=39172 mail.info: <22>Feb 25 20:26:54 publica -> cam SYSLOG C port=39172 mail.info: <22>Feb 25 20:27:54 publica -> cam
Juniper SA 2500
Hi Support, we would like to monitor juniper SA2500 could you help me to make template, I used the template J2350 but only the ethernet interfaces are monitored. Thznks & regards,
Opmanager and Cisco CSS ISSUE
Hi, We are using Cisco Content Service Switch device. Those device are not included into the basic set of device that opmanager can manage. For each device the Type is unknown. We then have several monitor, especially “service current tcp connection” The problem is when we open this monitor all information are displayed in OID form, and not text. In my attempt to solve this problem, I change the type to “Cisco content service switch 11000 series” and I lost all my monitors, which is a very very
WMI Problems
I have started having problems with WMI global paramaters. When testing credentials the global account fails. If I use the below credential for the device and input the same credentials it passes. If I then switch back to global it passes. Closing it out and coming back in the global account fails again. Any Ideas
I am trying to add this custom monitor for VMFS
Hi, I am trying to add this custom monitor I copied the text below from the host resource.xml file can you please fill in the mysql command that relates to my new entry. For ii iii and iv I just copied what was in the fields , can you please fill in what should be in the field for the datbase.Thanks: i)update graphdetails set protocolid=2 where graphname like %Free Disk Space in GB VMFS%'; ii)delete from devicepackagetograph where graphid=<graphid value for the custom monitor in graphdetails
Opmanager cli / snmp
Hello, We need a monitoring solution for our infrastructure. We test trial version which is very usefull. But my problem is that i can't have processor and memory usage, profiles check (snmp cli) always failed. I tried to upgrade snmp version on client server. I tried differents protocols to get informations : Telnet, ssh Thanks for responses. Best regard
How to find a specific interface in opmanager?
if i change the display name of a interface, how can i find it quickly?
apc ups - monitor voltage/amps on phases
Anyone know how to monitor the voltage and phases on APC UPS's? I think they are under .1.3.6.1.4.1.318.1.1.1.9.2. Thanks, Evan
OPmanager
We want the opmanager to send a sms to our phone when there is something wrong. But we want to change the layout because the massage it send is to big for the telephone. can someone tell me how to change the layout of de sms it send?
Monitoring SLES 10 SP2 Servers?
Hi All, Trying to get Opmanager to monitor my SLES 10 SP2 servers and do not seem to be able to connect and monitor via telnet? telnet is working through other programs? any ideas. I can monitor using snmp, but cant get disk stats to work?
Data Not Available on the CPU Custom Reports!
I am now using the ManageEngine Opmgr 8.0 for monitoring. When I try to run the customized report, only CPU counter showed no data available. However, I could view the real time report on CPU. Could someone tell me how to check it. Thx.
We want to view the System Log.
Hi all, We want to view the System Log as such attached snapshot file of SDP. - System Log Message, User, Action or Date, login/out time of user, etc.,
Monitor MS SQL - how?
Hi All, We are running the Essentials evaluation (upgraded from Professional) and are managing a number of MS SQL service however I cannot see the screen or information that is shown on the OpManager MS SQL video tour. What am I missing? Do I need to enable something? Thanks Phil
Unable to fetch Managed Object
Dear all, After I hinsert server Montiors options in Performance Monitors, I have this error message : Unable to fetch Managed Object details for the object : vm-ktpresta.bdo.banquedorsay.fr Could you help me please,
Alarm notification customisation
Hi All, Some quick background. We have a number of devices which are being monitored with multiple monitors on each device but the alarm messages we get are confusing. For example, if a main service fails then we get an email saying the main service and 4 associated (monitored) services are also down. This is great, however bringing the main service back up does not always bring all the associated services back up and the clear message just lists the device name in the message subject and with lots
Opmanager probe not working
We installed the opmanager MSP probe in one of our servers.However when we try to access the web console, we are getting an internal server error.The probe is not getting registered with the central server. we tried starting the server using startdms.bat from D:\Program Files\AdventNet\ME\Probe\bin . But it is getting stuck at "DMS is waiting for registration from the Central Server." Can anyone help me with this
SQLException while getting database connection.
I installed the new OpManager 64bit for Linux and I keep getting this error when trying to start. I have done a remove and fresh install twice now. This server can run my old OpManager 8 fine. Below is what I get: ./StartOpManagerServer.sh Java Home /data/OpManager/jre inside addon check SQLException while getting database connection. Check if database daemon is running com.mysql.jdbc.exceptions.MySQLSyntaxErrorException: Unknown database 'OpManagerDB' at com.mysql.jdbc.SQLError.createSQLException(SQLError.java:936)
User’s (Domain Admin) login logoff tracking in Domain Controller & Additional Domain Controller System's
Hi, I want to monitor all users (Domain Admin Group users) activates tracking like they change setting of group policies, deleting user accounts, modifying user permissions, long in logoff timings, etc.. Thanks & Regards Kishore
[Notification Profiles] - if Device misses 2 poll ?
Hi, I'm looking to change our current configuration for the notifications profiles, currently, most of our switches have the "Alert on 1 miss" setting, wich is a bit annoying, because this cause a lot of e-mail to come to us, we would like to change this setting to 2 polls, but the options are 1, 3 or 5. 1 seem to send mail whenever the device misses a ping, wich happens often (Adtran switches seem to "ignore" ping request if too buzy, and we dont know what is the switch threshold to say it is buzy,
OpManager DE 7.0 monitor Riverbed question
The riverbed snmp is enable. the probe server and central server can't recognize. the riverbed belong desktop category. I am a beginner, I want to know the step of detail how to setup the central server can recgnize. Thank you very much.
Linux NewMonitor Implementation
Hi i have an implementation question I have a Linux Redhat system with Oracle installed. I want to create a New Monitoring (Bulk) that it will - Connect (I have the user and Password) - Execute a query that will report back a number (i have this) - Bring Back the query response (number of records in a table) - Create an alert based on the response (if >20) - Clear the alert based on the response (if<20) - Have a Graph reporting the perfomance of the query. Can someone guide me through? Regards
Can we set a differnt ping and snmp collection interval?
There are situations where we want to ping certain devices rather quickly (1-2 minute) so we will know right away if it becomes unreachable...BUT we don't always need all the snmp info gather at the same interval and would like to only get that information every 10 minutes. Can we set the ping to have a different polling time then all the interface/cpu/memory/etc information? Thanks, -Wayne
OpManager vs. Orion
I am looking for a comparison document of OpManager v's Orion. I hear there is one out there somewhere This would save me a lot of time and hassle and allow me to provide a better business case for implementing OpManager. We already use ServiceDesk and are extremely satisfied. OpManager and Oputils will be a complement to an already powerful suite of tools. If anyone has this, please could they forward to harry.danger@yahoo.co.uk. very very much appreciated...
Trouble loading a DELL-DS2-MIB into OpManager 8050
Hi I'm having trouble loading a dell console switch mib into OpManager 8050 as it appears to be missing a construct definition, but I have no idea which MIB would define the OctetString construct. Any help would be greatly apprecaited. Thank you rob
OPmanager Iphone page refresh
Is there a way to have automatic refresh on the OPmanager browser for Iphone?
Upgraded to 8050, now issues
Once I upgraded to 8050 things started going wrong. Among other issues, it appears that now the "Server Availability Distribution" is all over the map. Look at the times at the top of the chart that is attached. Any help would be greatly appreciated.
Error! Displayed in Alarm Escalation
I've e-mailed OpManager support twice about this but had no reply... I was adding a new rule within Alarm Escalation but included a space. I was shown an error telling me to remove special characters, which I did so. On then trying to save the escalation rule a page simply displaying "Error!" was shown. Now this is all I see when I click on Alarm Escalation. What can I do to fix this? Thanks
Switchports and alerts
I have several Cisco access switches that are monitored by Opmanager. Every time a user unplugs their laptop or it gets shut off we get an alert. This is not optimal as we get hundereds of alerts a day. I have read the forums and the solution has been to unmanage the ports. I do not want to do this since I want to continue to gather performance statistics on these ports. I have seen the ability to change the criticality of certain interface rules but I dont want to change the rules for interfaces
URGENT : Change threshold in AD add-on already applied
Hello, I would like to change and actovate threshold in AD add-on, I have 41 DCs and I cannot find a way to modifiy globally threshold and if I go in each snapshot and i try to modify thrshold, all options are in gray and canot be changed. Can you please, provide how I can change them. Regards philippe
How to backup OpManager 8050?
How to backup OpManager 8050?
Generating an alert
Is it possible to generate an alert from an incoming email to a predefined mailbox ...?
Migrate from 32 to x32_64 arch... Opmanger.
Hill to all! I have a new x86_64 server,my old server with Opmanager is 32 bit. How i can migrate to Opmanager 64 from 32bit ???
Service Down notifications
We often get false alarms for service down. Alerts for device down can be modified to only alert after 3 bad responses. It would be extremely helpful to have this same functionality available for service monitors. Has anyone found a way (supported or not) to accomplish this?
Next Page