NO work - Install OpManager in Centos5
I get this error when I try start Opmanager on linux - Centos 5 Can anybody help? I have changed the webserver port 8080 or 9090 - no luck error : .... ...... Process : StartTelnetClientFE [ Started ] Process : NmsMainFE [ Started ] Process : TopoFE [ Started ] Verifying connection with web server ... Falla al establecer conecci�n con el servidor Web. Apagando OpManager. Intentando apagar OpManager Schedulers Stopped successfully All Shut Down Observers Notified Process : NmsSAServerFE [ Stopped
AS400 supporting ??
Are OpManager supporting monitor i5 as400 ??? If yes, is there any additional procedure to setup ?? Thx u
Unable to apply Interface Template change to devices
Hi there, I have just upgraded to OpManager build 7020 (from 6005 - big steps!!) and everything seems fine, however one thing I have noticed is that I cannot apply a change I make to an Interface Template, to the devices. As an example if I modify the Interface type 6 (Ethernet) from a Utilization threshold of 30, to 80, eventually I get a list of all the devices/interfaces and it tells me to click Save to apply the change. I click Save, and get a blank screen. I then either need to go back in my
Multiple Duplicate Interfaces
I am seeing multiple duplicate interfaces on my routers. I was having the 0% availability problem so I upgraded to 7021 and performed the change IP address work-around. They are ok today so far except for the duplicate interfaces. Deleting them works temporarily, but only temporarily. Is there anything I can do to fix this?
Add a new category
Is it possible to add a new category in ops manager? I have devices that are not part of the default categories. Thanks, Teddy
MSP 6005 - Selected asset is not scanned yet
I'm having a problem with the " Selected asset is not scanned yet" message appearing in anything I click under Device Info in the Device Snapshot page. SNMP is working on the affected servers. A hint as to what I'm doing wrong would be great. Thanks.
Blank/hidden login form.
Hello, I've just installed opmanager on a windows 2003 server. When I try to access to log-in page I get an "empty" page. I've tried with: - firefox(linux); - firefox(windows xp); - ie(windows xp); - ie(windows 2003 server); - opera(linux). Always with the same result: the "empty" page. I write "empty" because, using the "Show hidden elements" function in firefox (thanks to WebDeveloper extension) I can see the login page (just a little deformed) and then correctly log-in and use opmanager. I've
Monitoring Exchange 2007
We have upgraded to Exchange 2007 and attempting to configure the add-on client for exchange monitoring to monitor our 2007 environment. Is there anything you can provide to assist in this configuration?
Historical Reporting
Hi, When I try run some historical reports, i.e over a periond of 60 days, it uses the daily historical data out of the database. The problem is that it seems to only keep the last dataset recorded for that day (screenshot attached), usually a value taken at around 11:59pm. This is faily useless to us, as at time traffic is fairly low. Is there anyway it can calculate the max and average values for these days and keep them in the database, before purging the detailed data. This would make much more
just what i needed
i'm eric. joining a couple boards and looking forward to participating. hehe unless i get too distracted! eric
How to delete a custom monitor?
I want to delete a custom monitor that was created for a custom template, how can I do it ? Lahav
OpManager Database Questions
I have some questions on Opmanager database platforms. Currently we are running OpManager 7021 with a MS-SQL 2000 backend managing 235 servers, 151 switches and 35 routers (still more coming). Here are my questions: 1. Is Opmanager optimized for MySQL? 2. Would Opmanager perform better if the database server and the OpManager application is on the same dedicated platform? 3. Has anyone had experience with the Database platform running on a VM? 4. It seems backwards but if we wanted to convert the
Domain controller is giving no information
One of my domain controllers is giving no information any more, when i try something i'm getting access denied. This occured after the upgrade from op6 to op7 or after a patch. Were using build 7.21 I can get the CPU info but no info in the main screen. Rediscovery or adding the client again did not work Please advice Regard, Beheer_ka
SNMP forewading / relay
Do anyone know if and how it would be possible to forward SNMP traps from OpManager to another application like HP Openview? Cheers TA
OpManager MSP 6005 and CentOS 5 Install
Hi All, I have been trying with much grief to get OpManager MSP 6005 to install on CentOS 5. It is a vanilla install of CentOS 5 and the actual installtion seems to work fine, its only when i try to start the OpManager service that it fails. Here is the log: [root@tiger ~]# ./ManageEngine_OpManager_MSP_Central.bin InstallShield Wizard Initializing InstallShield Wizard... Searching for Java(tm) Virtual Machine... . Preparing Java(tm) Virtual Machine... .................................. ...................................
Starting OpManager in Linux - Centos
Hi I get this error when I try start Opmanager on linux - Centos 5 Can anybody help? I have changed the webserver port 8080 or 9090 - no luck error : Verifying connection with web server ... Failed to establish connection with web server. Gracefully shutting down OpManager. Trying to Shutdown OpManager Schedulers Stopped successfully All Shut Down Observers Notified Process : NmsSAServerFE [ Stopped ] Process : StartTelnetClientFE [ Stopped ] regards Groen
LSASS CPU Usage
Version 7 build 7021 I deleted the Domain Controllers group because I don't have the Active Directory plugin.. Now I'm getting an alert "LSASS CPU Usage is 99 % Processor Time, threshold value for this monitor is 90 % Processor Time " It could be a result of upgrading to 7 three weeks ago, but I can't find the location on how to change the threshold. How do I change the threshold?? It might be a suitable level, but i just want to know where to change it.
IP address followed by :53
Why am I now getting :53 after my IP address. If i do an nslookup, i get a result of: 192.168.1.1:53
Only admin can edit business views
Since updating to 7021 only the admin account may edit business views even though other accounts have full access to those views.
OP Manager MSP Edition manual
I am just getting started using OP Manager MSP Edition. From my limited use/experimentation, it looks like the MSP edition has some significant differences from the non-MSP edition. However, I can't seem to find a user guide/manual for the MSP edition. One example of something I am trying to do is configure thresholds on a device type. The demo on how to do this (http://manageengine.adventnet.com/products/opmanager/howto_demos/threshold_config/demo1.html) differs from what is available to me in the
MSP 6005 -
I'm evaluating MSP at the moment. Getting my head around most things but I'm getting this error; Selected asset is not scanned yet When clicking anything under Device Info on the Device Snapshot page. SNMP is running and working on the devices. I've had a look through the knowledge base and forums but can't find anything. A hint in the right direction would be nice!
No error append using 'a Run command notification profile'
if an error or event occur, opmanager triggers my program to run but my program does not receive any error message with it as argument. the check boxes: 'err append' and 'append' are both checked. i tried it with a batch file, a java program and net send command but without success. what could be the problem ? I'm running OpManager 7 Build 7021 (trail version) thanks, Rogier
Hostresource.xml documentation for parsing output?
I've had a search and I can't find anything. I've modified Shawn Jefferson's vbs script to check the value of the MS Exchange IS transport temporary tables (emails get occasionally stuck in here). Across two different servers the output of the script varies and I need to take the TempTableCurrent values reported for each server and monitor this with a threshold across intervals. Is there any documentation for the hostresource.xml syntax I could use to parse this output : Cheers, Paul. Server1: Microsoft
Information Store Mailbox Logon Operations per second
This is one of the standard Exchange monitors, and it's doing the same for all of the exchange servers I'm monitoring. For some reason it seems to be acting perhaps as a cumulative counter, since the installation of the trial the value has just grown and grown. The current value it tells me is 163,000+ logons per second - no way could the box do/is doing that. When I run perfmon and look at the value there, I am peaking at 3 logons/sec mostly at 0. The SNMP OID in question is : Exchange.ISMailbox.LogonOperationsPersec
MSP Probe 6005
Hi Question!! You can Unmanage everything but can you unmanage a PROBE? Have given Raja some topics when he was visiting me, Is there any solutions off thus topics?
Can not remove alarm...tried all the tricks
One of my W3K server snapshots has a windows event alarm that will not delete (or show details which is just blank on clicking link) I am quite used to clearing ghost and stuck alarms in the three weeks I have had opmanager but this one got me beat. Have... Show alarms - select - clear and delete - just get blank Show alarms - delete all - just get blank page. deleted "event" rows for source via mysql. Strangely it does not appear. (So what table is it?) Changed IP to force alart aka clear ghosts
Updating device templates
When I update a device template and apply it to servers, the servers dont get updated. :(
OpManager 7 fails to start
Hi, OpManager is failing to start. The errors which I get is, "Oops looks like a few tables are corrupted" Run RepairDB.bat from bin directory and restart the server. I have that option and now I have another problem where it will not start fully. Have DB errors now. I have attached the errors and messages displayed. Would appreciate if someone could help. Thanks
OpManager7.0 : Alarm Messages
Which feature that I must remove, if I don't want this kind of alarms : Traffic Utilization for Interface ** to NODE ** is 100%, threshold value for this monitor is 65% Errors rate for Interface ** to NODE ** is 1.106%, threshold value for this monitor is 1% Errors rate for Interface ** NODE ** is 1.106%, threshold value for this monitor is 1% I unchecked all "Interface Templates". By the way... How to remove ALL thresholds (Error and Discard) for all interfaces in one operation from "Admin/Interface
No RX and TX data in two interfaces
Hello, I use OpManager7 and I am getting no RX and TX data in two interfaces however I did get it with OpManager6. Is there anything I can do? Regards, Manuel
Even more trouble ;)
Hello The last week and this week i tried to send a support ticket to you but somehow it didn't work. I tried to attach the Support Information File but after the upload it always displayed "No files uploaded". So i'll post my problems here and attache the Support Information File. 1. Interfaces cant be added to a device The interfaces are discovered when i click on "Rediscovery" but if i want to add them OpManager sais "Interfaces added succesfully" but i dont see the new interfaces in the device.
Alacatel Switches --> Mibs?
Hello i tried to get these two mibs (Attachment) working because i think OpManager doesnt know how to handle my switches. But after i've uploaded them over the mib browser i get the following errors: Error parsing MIB:ADN-ENV-MIB.mib Exception while loading MIB:Could not parse the file D:/OPMANA~2.0/OPMANA~1/./mibs/ADN-ENV-MIB.mib Couldn't resolve these MibNodes : { adnEnvHss } and the second one: Error parsing MIB:ADN-MIB.mib Exception while loading MIB:Could not parse the file D:/OPMANA~2.0/OPMANA~1/./mibs/ADN-MIB.mib
Network view incomplete
Using 7021. My network view for a subnet does not show all devices on that subnet. Any way to fix this?
Event Log Rules Not generating alarm notifications.
Hello, I ticked to be alerted some event log rules and also created a few, such as Event ID 9539 for an Exchange Store dismounting. I left all the other optional fields empty. I triggered this event by taking a store offline. Event though I have the check boxes selected in my notification settings, I'm not getting alerted. I can see the events in the application log. Am I missing something? Other alerts such as thresholds are working. Thanks,
to fetch Managed Object
Upgraded to 7021. All was working. Added some new servers. Continued to get reports and alarms. Went to look at a server to deal with an alarm, and got 'Unable to fetch Managed Object details for the object '. I now get this message for all servers I try to look at. Is this a 7021 bug? A database corruption? Something else? How can I fix this?
WAN Monitors - IPSLA - Working?
Hi, Has anyone been able to get this feature working correctly ? I have gone through the guide, but sill no joy. Anyone else have problems and get them sorted? :cry:
Number of users accessing
hi, i wanted to know is it possible to keep account of users accessing our application throught opmanger. and one more thing can we keep a track of the data base ... is it increasing and how much. thanks anish
Problems Right Off From The Start
I installed OpManager 7 today on my test server that is running Server 2003 Standard Edition, SP 1. I logged on locally as the local machine admin that has FULL RIGHTS to the machine. I installed and everything seemed to install normally. Now, when I try to go in and execute the application, it won't start. Finally, I get the error: 'OpManager is already using the WebServer port XXXX' I read through and saw that I needed to go in and run the ChangeWebServerPort.bat. I did that, still got the same
Memory Utilization Report Shows Negative Values
I have setup the daily report Memory Utilization to be emailed to me and on only two of the servers it shows negative values - (picture attached) If I test the monitor it works fine. Any ideas what's causing this?
Migrate current OpManager Installation to new hardware
I am wanting to migrate my existing installation to a new server and maintain my existing database. I am using the built in MySQL database on my current installation and want to continue to use it on the new installation. Is it possible to install on the new hardware and move my existing data to the new server and not have to re-register? If this is possible, how can I do that?
Next Page