End to end performance tests
I'm trying to set up end to end performance tests between my application servers & the users I have set up a scenario that simulates a user connection from a workstation to an application via an URL with internet explorer using the remote browser monitor in Application Manager. From this I'm capable of producing the overall response time. Now I would like to break this response time down giving the individual response times for each component crossed on the network (the routers, firewalls, etc) between
Monitor EMC Centera
Is there any way to monitor available space on a Centera via OpManager? I see that OpStor can do it, but it sounds like it's actually using the Centera CLI to do so, not SNMP. We have one that we'd like to do some capacity trending on, and it would be much easier using OpManager than having to do it manually.
False alarms when WMI crashes
Hello Gents, I see the following issue. Sometimes (1-3 times per week) WMI service is crashed on different Windows servers. Some servers have Windows Service Monitors. OpManager tries to check service status via WMI and can't do it. I.e. OpManager immediatly sends alerts about service down. There is no any settings to send alerts for two or more WMI checks. Can you please add some more configuration settings for Windows Service Monitors ? I would like to see here Consecutive Times setting as for
Opmanger reports a device is not replying to pings but can ping using CMD
I get an alert that a ping to an ip address is not responding when using Opmanager. However, when I go to a command prompt and then ping the device, I get a response. This means I get a false email alert. I have just upgraded opmanager to 8722 from 8050.
OpManager network mapping and discovery
Hi, I would like to know what is the road-map for the network layer 2 discovery and mapping. I know the new OPM 8721 has something, it is good, but it is not enough for some customer. Customers would like to: - see network discovered automatically every x days (new routers, switches and so on added automatically) - see network maps by subnets or by other kind of selection - multi-vendor support - support for Layer 2/3, OSPF, EIGRP, MPLS, VLANs, and BGP - vlans representation - export maps in several
OpManager russian localization
I installed OpManager 8 and am looking for russian language localization. Can you provide this for download? We are looking for a entreprise monitoring solution, but english language for our support team is not accepted. Thank you in advance.
How do I add several widgets at a time?
In OpManager I am able to add add a widget on the dashboard (i.e. N hours CPU utilization) but how can I add 16 of the same at once? SBudd
Windows 2003 SP2 WMI Win32_PerfRawData_W3SVC_WebService Timeout Workaround
I noticed when adding a WMI performance counter i couldn't get the Webservice details. It gave me after long time a error. It was only by the Webservice instance, the rest of the WMI counters worked perfectly. After digging i noticed that the listattributes.vbs is passing 'null' to the WMI counter and that resulted in a time out. By replacing the 'null' value by a '-' i recieved details from listattributes. So i came up with the following workaround. I just wanted to share it with you in case someone
Invalid Map View Names
I have created several map views with invalid names. Please let me know how I can remove these map views. Attempting to access the map view presents this error message. No Infra Structure View found with this name.
opmanager don't stop
I am traing to stop opmanager service by '/etc/init.d/opmanager stop' but i get this error. -------------- WebServerPort::: 80 BE PORT:::2000 RMI PORT ::null Could not Shutdown the server through TCP from the host localhost Authentication failed for user admin. Please verify the user name and password --------------- anyone could help me best regards.
CPU and Memory monitoring
Hello, I generate a report each day for Memory, CPU and Disk usage. The disk usage report is great, it shows percentile value as well as actual space (MB/GB Free etc). I am wondering, is it possible to get this same functionality with CPU / Memory (example. display 10% CPU Free / 100MB Free) as my daily reports require me to enter the MB Value as well as a percentage. Thanks!
How to run the StartOpmanagerServer.sh script
For some reason Opmanager stops polling my devices after I log off of the server that the application is installed on. Does this have something to do with how I am running the StartOpmanagerServer script? To get Opmanager to start polling devices I run the shutdown script and then I run the StartOpmanagerServer.sh script. I run the script by logging in to the linux server and doing a "sudo su" and then to execute the script I type "./StartOpManagerServer.sh". Should I be doing something different
Snmp problem with Snom Phone serie 3xx and 8xx
Hi to all and sorry for my English, we start to use free version of Opmanager to execute test for our environment. We need to manage via SNMP some SNOM phone that (as reported at this link: http://wiki.snom.com/Networking/Simple_Network_Management_Protocol_%28SNMP%29 ) can have a sample snmp management. Our Step in Opmanager 8 8050 New Device Template creation -> Query Device at port number 161 with version SNMP v1/v2 in public community string Opmanager reply: Device is not reachable. Check
NETFLOW AND OPMANAGER on same server
NETFLOW AND OPMANAGER on same server OPMANAGER add-on I add NetFlow Settings when I choose enterprise ,can connect.But I choose professional,can not connect. But I install the professional version. can you help me? Thanks
Syslog Monitoring & SNMP v3 Support available now ! Upgrade to OpManager Distributed Edition 7502
Dear Customers, OpManager Distributed Edition(DE) Team is pleased to announce the release of Hotfix 7502 packed with couple of new features,enhancements & issue fixes.Upgrade to this OpManager DE hotfix by following the backup & upgrade instructions by clicking on this LINK. Hotfix 7502's NEW Features / Enhancements Discover & monitor SNMP v3 enabled devices Syslog monitoring feature is included Provision to view all the URL monitors using paging component Quicker Web-client
AIX monitoring
Hi I would like to monitor our AIX server. I would like monitor the disk usage on AIX, do i need to use CLI? I tried to type in the password using"change password" function but got the following error. Which parameter should i define? Pls help! CLI Incrooect Login Parameters Thanks Calvin
Change device type from server to desktop for several systems at the same time.
During device discovery, several of my Windows 7 desktops were classified as "Servers" in OpManager. How do I change the device type from server to desktop on multiple items at the same time without having to do it individually ? Thanks, Chris
Tx/RX Cisco 3750 always NA
Dear Tim Support, We have problems when monitoring Cisco Switch 3750 port utilization, always NA. But when get using MIB browser get values. Please help.Thanks
Depedency Mapping
Are there any dependency mappings that are automatically created between switches and host?
WAN RRT monitoring support for Juniper RPM
Hi, do you know that also Juniper has something similar to Cisco IP SLA? It's named Real-time performance monitoring (RPM): http://www.juniper.net/techpubs/software/junos-security/junos-security10.0/junos-security-admin-guide/rpm-ov-section.html Do you think it will be supported in a near future? Regards, Roberto D.
How can I use OpManager to monitor a server's Event Logs?
I would like to monitor one of our servers for a few different Event IDs and, at the very least, would like to generate an e-mail when those Events crop up. How do I do this? I see the Admin -> Event Log Rules area, but this window makes little sense. They seem to be pre-defined "rules", but don't seem to be configured, nor do they specify what server they are watching... Any help would be appreciated. Thanks.
Sceduled Discovery
Is scheduled discoveries going to be included in Opmanager?
AS400 monitoring
Hi all Did opmanager support AS400 monitoring? For example: AS400 system disk usage. Thanks Joe
Folder Monitor - multiple credentials
Hello, As a feature request, it would be great to have the equivalent of what you have done with URL monitors, but have it for Folder Monitors and allow you to use another credential to connect, similar to "Connect using a different user name" when mapping a drive in Windows. E.g., we currently monitor serverAShare under Device Snapshot, Monitors, Folder Monitors. It authenticates using the credentials I have set in the passwords list. But because we have 2 domains accessing this share, we need
URL Monitor Match Content
Hello, Does the Match Content field support regular expressions? If not, can you please add that functionality? Thanks!
manaually add devices and populate device details
Hello there, Im simply interested in using Op Manager to see business views of servers. Without turning on scanning, or any network discovery i just want to be able to manually add the devices and then manually populate the data. Can i do this?
Custom CLI/Telnet monitor for a custom device template ?
Hi, I want to add a Telnet monitor to a custom device template I have created. When looking at the configuration needed in HostResource.xml I need to add the new custom category into the correct Poll ID. Since this is a custom device type do I have to create a new Poll ID? Or is there another way of doing this? Best regards Terje N.
Device based?
I just want to know OPManager is device based or port based? Secondly NetFlow Analyzer is device based or port based?
RSS feeds for alarms
2-3 years ago, I offered a suggestion for RSS functionality in OpManager in the forums and the OpManager folks seemed to think this was a good idea. However, such functionality still doesn't exist. Do the OpManager folks ever plan to implement this? RSS feeds are handy for several things, including desktop widgets and integration into existing webpages. In our situation, we'd like to integrate an RSS feed of current alarms into our network services homepage so that end users can go to it and see
Trouble importing company logo
Hi, Currently using Op Manager build number 7502. We are wishing to rebrand our report headers with our own company logo. We have tried to import a comapny logo jpg via the "rebranding" section under "Admin". We select the logo and click import. Once this was do we restarted the Op Manager server/application. The report header logo will not change, still default Managed Engine. Is there a fault here or do we need to follow a different process? Regards Corie
Changes in HostResource.xml will be maintain after Hotfix update?
Hi Just would like to clarify, whatever changes we do in HostResource.xml, does it will be persist after hotfix applied? Or we have to do the changes again? -- Regards, Anandharaj System Engineer (Unix / Linux)
How do i assign a technition to an alert?
How do i assign a technition to an alert?
Sort the Notes descending in Alarm page
Hi, I would like to have the "notes" in Alarm details page to sort by date desc. Keep the recent notes at top. -- Regards, Anandharaj System Engineer (Unix / Linux)
Event & Alarm ID
Hi, I would like to suggest OpManager to display the Alarm / Event ID in the Alarm page. This would be useful when we put the notes - so that we can refer what we have done for that particular event. -- Regards, Anandharaj System Engineer (Unix / Linux)
Support Center Plus full integration
Hi ManageEngine, Currently, in OpManager you can configure in Admin - Notification Profiles - Email Profiles to trigger an email for a certain event and that will create a SR in Support Center Plus. Which would be handy is having the same fully integration that it has with ServiceDesk Plus, where one can create profiles for certain events that come from certain services and assign them to an specific engineer. In other words the product can't talk directly with Support Center Plus if it would be
Database backup problem
Hi Helpdesk When i tried to backup the DB of Opmanager. I stopped the Opamanger service and ran the following command with error. Could you please help? Thanks Joe C:\Program Files (x86)\ManageEngine\OpManager\bin\backup>backupdb.bat/sh java.io.IOException: Couldn't get lock for backup\temp1\BackUp_JAN25_2011_16_22_ 53_8722.log at java.util.logging.FileHandler.openFiles(Unknown Source) at java.util.logging.FileHandler.<init>(Unknown Source) at jdbc.BackupDBUtil.getLogger(BackupDBUtil.java:566)
Various issues preventing implementation
Our company purchased OpManager a few years ago (maybe v3?) and stopped using it after a year due to excessive issues. We ended up going to HP SiteScope, which, with its latest versions, gone to crap and is no longer good enough for us. The latest OpManager sure seems to have a lot of improvements over the old one, and many of the issues we used to have are no longer there, but unfortunately a few more have creeped up. Here are the "serious" issues we have, that right now are a serious negative
cisco ap 1100 no cpu data
I cannot obtain cpu data from my Cisco ap's 1100 series,
Opmanager Through firewall?
Hi Is there any way I can manage devices the other side of a firewall securely with Opmanager by either proxying or using specific ports. I know other products allow this? thanks Andy
Scan for Windows Services
Is it possible to scan for Windows Services during discovery, just like the option for TCP services.
Next Page