Monitoring APC UPS' with Opmanager, what CLI credentials to use?
HI everyone, I am trying to monitor a Symmerta 40k APC Ups with Opmanager. - i have the SNMP traps setup and working correctly, however i cant get the CLI credentials to work - it gives you the options of either SSH or Telnet, however the devices itself only seems to support FTP and the GUI with the built in System OUI (as follows) .1.3.6.1.4.1.318. .1.3.6.1.4.1.318.6 - Has anyone got CLI credentials working ? and if so can you check your OUI and see if they match the ones above? or any other
SNMP issue, OpManager not updating
Hi All, Snmp is enabled on the device but op manager is not updating....
VM-Ware ESX
I'm on the latest version of OpManager and it seems like every 7-8 days I have to reboot my OpManager server for it to start registering SNMP again on my VM-WARE ESX servers. I've got more than the system requirements for the OpManager server and I just find this really odd. Was wondering if anyone else had reported this issue.
Vendor Unknown
Hi my device is displaying Vendor 'Unknown' . I am unable to add vendor to the device. I need help in this. Thanks!
Alarm for SNMP linkup linkdown traps
Hi, I would like to receive an alarm when a link goes down so I configured the router to send an SNMP trap to the OpManager. The problem is that some time the links flaps and I receive too many alarms. Is there a way to fix that? For example send the alarm only when OpManager do not receive the SNMP linkup trap in the next x seconds. Thanks, Roberto D.
Help !!! I need to know how to figure out a error!
It says Requieres more than 1 bussiness views of shortcuts exhausted, also when i want to add a device(s) the program star to load the configuration however it never go forward. Also when i select the link Maps and then i want to add a Business View it never pass, it says Initializing Bussiness view and never go forward. I will like to be on contact with you my email is isjonat-@hotmail.com Help i have been on that for many time.
Access via Blackberry with Op Manager 8051
In your readme for the latest service pack it says you can access Op Manager with the Blackberry. I have a BES server, I'm using the Blackberry browser, yet it still doesn't come up. From the readme "Users can now access the OpManager web client using iPhone or Blackberry user interfaces"
Not getting emails alerts
I have configure opmanager of one server with the three WMI monitors and also configure the email notification .But still i didnt get the alert email Thanks Pravin
Monitor system temperature in OP Manager 8.0
HI How I can configure to monitor system temperature. is any way available? Regds Pradeep
Can't add devices to business view ?!
Hello, after upgrade OpManager from 8050 to 8051, I can't add devices to business view's ... I repair DB, restar the service, restart the server ... Regards, Z
[MSSQL with Instances] - Canceling monitor edition returns to the "default" instance
Hi, I'm working on putting "SQLADM Named instance of" for all my monitors of each of my instances (Read previous posts if you want :) I finally did not delete the monitors, since I would probably loose collected data in the process...) and I meet a "problem", here it goes... If I go to the second instance of my SQL monitored Device, I can go "Edit monitor" for say "Granted WorkSpace Memory" (in the Memory Monitors pane), I make my change, adding text to the alarm and clicking "Ok". It
OpManager upgraded 8050 and MS SQL backend
Hello, I upgraded our OPmanager with latest service pack 8050 and now we are facing issues. Opmanager is used with MS SQL backend on MSSQL 2000 First problem When I try to add Windows services I got error Error While handling the request Second problem Process monitor is not working, when I tried to add a process monitor, i'm not getting error message, I've nothing and process monitor is not added. All existing process monitors gone As there aer a lot of great new things in this version
Backup and Rstore OPmanager from windows professional to windows Server
Hi, I have Three questions, 1) I would like to know what is the procedure of backing up OPmanager from normal windows machine to windows server? 2) Is it recommended to make backup of OPmanger oftenly.? 3) When Obtaining new license, whats the procedure to activate it in OPmanger machine ? Thanks,
How to change the severity of alert?
for example, i want to change the interface down alert(not the trap) from trouble to attention.
How to add specific OID to subnet
Need help, how to add specific OID to the scan result on IPAM
Problem of integrating op manager with service desk plus
trying to get service desk plus to integrate with op manager but op manager tells me my server is too busy to fetch information. I checked the log files and got this error msg. im thinking maybe it has something to do with the fact that im using active directory logins so i dont have a default admin account. only the ones through active directory. your quick response would be greatly appreciated. here is the log file msg. 12:14:00:659 PM Login form post: HTTP/1.1 200 OK 12:14:00:659 PM actionClass
Add Device That is Not Connected
How do you add a device that is not currently connected to the network? I would like to be able to add a device and setup its monitors so that it is ready to monitor once the device is connected. Thanks,
Custom WMI Perfmon Information
Hi, We have some custom Perfmon values that are being exposed. We can look at these values on the server via the Perfmon viewer however we cannot pull them into OpManager. We set up a new WMI monitor, add the correct credientials, and OpManager can see the Categories with our custom counters and lets us select them. All is good up to this point. -however- nothing is being pulled into OpManager and when we use the 'test monitor' option this fails. All other WMI information from the server comes through
cpu utilisation monitor not right for linx?
I have opManger 8 and the cpu utilisation (cli) for linux isn't working, it appears the command line being used is not right for linux, as it returns an empty string if typed manually on the cli. When you use the test monitor button, it reports no response. The cmd line it is using is top b n 1 | grep 'CPU[0-9* states:' which in Fedora 12 returns an empty string, is there way of editing this monitor so that the cmdline can be altered?
Run Application Notification Profile
Dear Sir, I have an application that need to be run when an alarm is triggered , I need to pass the device IP Address parameter to the application , I used IP Address parameter but it returns the IP address of OP Manager server not the device. Can you help me on that please My best regards
No database in SQL 2008 Express instance
Hi! Is there OpManager can monitor database of SQL 2008 or only 2005 and below? I can view SQL 2005 bases and read http://support.opmanager.com/sd/AddSolution.sd?solID=21301 But list of databases in SQL 2008 Express is empty. Michael
Help !!! I need to know how to figure out a error!
It says Requieres more than 1 bussiness views of shortcuts exhausted, also when i want to add a device(s) the program star to load the configuration however it never go forward. Also when i select the link Maps and then i want to add a Business View it never pass, it says Initializing Bussiness view and never go forward. I will like to be on contact with you my email is isjonat-@hotmail.com Help i have been on that for many time.
How can i change bivUnKnownServer.jpg for unknown devices.
this icon http://demo.opmanager.com/webclient/devices/images/CeruleanBlue/bivUnKnownServer.jpg
Problem with sending SMS
Hi, I configured the Mailserver-settings, so that mails are created correctly. Now I wanted to create a profile to send SMS via e-mail. unfortunately, this results in the attached error. I can enter any mailadress whre the mails should be sent to. It always creates this error messages. However, if I use an internal mailadress, it works and a mail is sent to this user. But it does work with mailadresses in another domain. HELP PLEASE !! Juergen
modification of business view in opmanager
within business view when modifying or adding add device leaves the following alert: Requires dwells than 1 business views or shortcuts exhausted aid please
[MSSQL Alarms] Instance name variable not available.
Hi, I'm currently setting up our MSSQL monitors, wich now gives good numbers thanks to Sharavanan from support, however I meet some disappointment when I set up the alarms messages. It seem that the "$INSTANCE" variable is not available for MSSQL monitors (We have SQL Instances on our server). This is a problem since the E-Mail we get only send the name of the Device, wich is the Windows Server, and the message is something like : Page reads per second is 776 Reads/sec, threshold value for
Reports on Internet useage
We would like to setup monitoring on our internet router, so we can look at a period of time and see what our bandwith usage is. Does anyone know how to setup the monitoring so it will look at a period in time (i.e. the last 24 hours)? Thanks
Syslog Review
With the syslog viewer in OPManager 8 I can only view the recent messages. Is it possible to access historical data? Thanks
Community Tab
The Community tab in FireFox 3.6 doesn't display properly
Problem with Probes
last week we have installed the OPmanager Distributed editton, (build 7501), we are going to monitor aproximatly 1000 devices that are located in more remote locations. The Database from the Central server is on MSSQL 2005, and the database from the Probe is on mysql. The Problems that we are facing at the moment are these: the Graphical interface(CPU Utilization, Disk Utilization,etc…) in the snapshot view from the Probe location, is not appearing in the snapshot view of the Central Server. I have
Interface VLAN information
Hi, I'm evaluating OPManager and I would like to know about what vlan each interface belongs. Is there any way to know vlan information about switch interfaces? Thanks
How can I get the reports showing additional fields information of interfaces?
I know how to create a report that show additional fields information of devices. But I want to get a report that can show additional fields information of interfaces. How can I get the reports like this: Device Name | interface | Contact Name(or other Additional Fields) Cisco6509-1 G0/1 aaa Cisco6509-1 G0/2 bbb Cisco6509-2 G0/1 ccc
[MSSQL Monitoring] - Logins per Seconds
Hi, I set up MSSQL monitoring a few months ago and all (Well, not all, but many...) monitors went red, after looking at some, like database file space, I decided to wait until I have some time to set convenient threshold, since most of our databases were bigger than the defaults threshold, i thought that all the threshold had to be set according to our environement, and I didnt have time to look into it. Now I am at this time to set those threshold and I came to a strange monitor value...
sort database names
Hi, I'm using opmanager to monitor a MSSQL machine and when adding databases thy're sorted on last added.. is there a way to sort the databases inside an instance alphabetically on their names ? See attached picture. KR, Ronald
Disable reports
How I can disable some Reports ... I have create some Business view, and schedule reports about availability of devices on this view. Just for test ... But, now i can't disable it. Every day at this time, a have received an e-mail ... regards, z
Linking Opmanager with SDP
I am trying to link Opmanager with SDP, and keep getting the error "Unable to fetch values from ServiceDesk Plus, The server might not be running or the network traffic may be too high". SDP is setup to use AD usernames, and I have followed all the guides as to setting this up. I have Netflow residing on the same server as SDP on a different port and it connect fine.
Problem with performace monitors with opmanager update 8050
I update my opmanager to the last versions ( 8050 and 8051 ), but now i can't see the historical data of the performance monitors of any device. The opmanager show me the text "No data available" (" No hay datos disponibles " in spanish version ). We execute repairdb.bat but i can't resolve the problem Thanks!
Seveity of Alarms and Dashboard
Hello! Here some ideas: 1. We would like to see option for sending some kind of Alarms to different people. For example, when interface is overutilized alarm should be send to John, when errors or discards are over threshold alarm would be send to Bob and so on. 2. Also it would be nice to change severity of some kinds of events for certain devices. 3. We like to use CCTV Dashboard, and we would like to see Applet where Alarms will be sorted by severity. Something like Recent Alarms, but sorted other
Group Devices
Hello, We have 200 servers for different purposes and using OpManager 8050 Servers are grouped in about 20 different groups. I now want to compare the CPU/Memory/Disk usage of the servers in one group so that load can be distributed on them equally. Regards, Shankar
Server autoimport alerting-profil OpManger
Hi how can I in Opmanger 8 for each server that is added automatically add an existing alarm profile? Thank you Benni
Next Page