Server full with NetFlow data
How can I free some space on my server? I am running NetFlow Analyzer, but disk is almost full.
Text of Approval message visible in Approval Tab.
When approval has been sent to a customer it is not possible to see what the SuppRep actually asked for, under the Approvals tab. It just says: 1. pending approval on...date/time. This function is meant to make approvals more official and traceable in cases of disputes, but since they are not visible it doesn't help much. The reply from the customer is visible, which is good, but the original text sent to the customer has to be visible too.
Email SMS Noitifications
I have several different notifcations set up on is an email notification to a distribution list on our mail server. The otheres are to the techs cell phones via messaging using our mail server for SMTP. The email notification to the distro list works fine. The issue is with the EMAIL SMS they are never received. If I do a test to under the mail server settings it works fine. I have looked at the notification log and it shows it being sent when a notification was triggered to send however it is never
Reconsile Contacts - Bug?
I have noticed that when I reconsile contacts together 1 contact replaces the data in the other. Would it not be better to replace empty fields in the main record if they are populated in the secondary? So the main contact has Name, title, login and email, the second records has name, phone number and email. I thought when I reconciled it would add the missing phone details to the main record, but it just lost the information. Anyone else have the same problem or have a need to use this feature.
Monitoring of AIX machines
I'm trying to monior some AIX machines. For some strange reason, I' able to monitor 2 of them but on some others I keep getting error-message when trying to add the monitor. Authentication failed. Kindly verify the username and password provided.Also check whether the given Command Prompt is correct. I have tried both with SSH and Telnet, but both fails. Sometimes I'm redirected to a website http://monitor:9090/adminAction.do?method=configureHostDiscovery which is blank. It's a bit strange since
Limit on attachments?
Using SD+ 7005 Is there a limit on email attachments to SD? If so, where can I change that?
Problem with login
Dear, SITUATION : We have the following situation : We give training in small groups to our end-users concerning the usage of ServiceDesk 7 (e.g. : How to fill in requests, find solutions�). After these users followed the training we "add" the users from Active Directory to ServiceDesk so only these specific users can log in into SD7 (Active Directory Integration is enabled and pass-through is also enabled). We decided to do this so that only users who followed the training can log in. Users who
Compliance Report
In the report area there's no FISMA Compliance Report. Is this a custom report or do your reference a existing report (SOX,PCI ??)
Cyrillic in alarm notes
Russian language is not supported in OpManager 7 alarm notes ?
About monitoring of IN/OUT data
Dear all, I am use a neflow Analyzer 5.0. I have a problem of IN/OUT data. In My one leased line Delhi 2 Mbps. I am not able to received data of Out traffic. Please provide me a troubleshooting.
Technician with restricted view ?
I would like to be able to enable technicians from a couple of our subsidiary companies to use our SDP server. I want those technicians to only be able to see and deal with calls raised by users from their subsidiary and not see the calls we deal with on behalf of other companies within the group that we directly support. Is this possible in SDP or is the only a see all view for any technicians ?
Home Dirctory Share
When creating a new template user and I set the home dir to \\servername\share and apply the full control permissions for the user object it is fine. If I use the template to create a new user it will not create the share, also ADManager + gives me an error. The home directory must be a share rather than the full UNC path as it is application dependant
Customizing Overall Look of ServiceDesk Plus
Hello Is there a way to customise ServiceDesk? Even if it involves code that is fine, but is it possible? Sand shoe
SLA doesn't
I have a SLA rule, and enable it. first, it operated well, but now, it doesn't work. who can help me? thanks!
How to monitor the Networktraffic / dataload?
Howdy, One small question .. I haven't searched it in the FAQ cause I think it is a old request but with new Hardware ... but let me explain what I mean. We got IBM BladeWorkstation .. and I want to check the Network connection between the Blades and the Thin Client. .. The Balde is not the Problem cause it is more less a normal PC (XP32 and 64 bit), the ThinClient is more tricky to finger out, cause no OS on it :-(. My problem is that I dont know what is the easiest way to search for this data load
Additional departments appearing
My departments list appears to be gaining a few hundred "Manchester" entries. Deleting these is a little tedious so I need to find out where they're coming from, and what action I need to take to prevent them from appearing. Also, why multiple entries for identical spellings?
Home folder deletion
Home folder deletion, any option available to delete users home folders or move home folders in conjunction with the deletion of Active Directory accounts Tyrus Cooper
Log Collection Internal
Is there a way to change all the collection interval for all hosts in one step? -- cheers, g
control files
Hi all, I've a question, is possible check when a files is opened, closed and modify ? I've Solaris 10 and 9 Sparc servers I will install Eventlogs professional to windows system thanks for attention Best regards Alfredo
Grouping Users and Adding additional fields
Hi We are evaluating ADManager and have the following requirements/questions: 1) Users should be grouped in either an organisational unit or a group. Each group will have a user, which owns the group for possible invoicing detail (address etc). All users will belong to one of these groups/OUs. Please advise on the best practise to implement the user groups, whether this should be in a group or in a OU. 2) We need additional fields for users. Each user has a physical address (stand #, street, suburb,
Windows NT4 WMI - CPU Monitor
We are monitoring 2 NT4 boxes using WMI. I am getting data for Memory Utilization and Disk Utilization, Service Details etc. We are not getting any data for CPU usage. States "No data available to generate graph" How do I enable CPU monitoring? Thanks, Andy.
SQL Monitoring
Hi. I'm trying to monitor two SQL instances at the same server(SERVER,SERVER\Instance2), but Applications Manager only connects to the default one. How can I specify the name of the SQL instance I'm trying to monitor? Manuel Lago
95th percentile
Hello, Just want to ask if the Applications Manager has 95th percentile reporting like in OP Manager. Thanks, Jerico
mysql database in another computer
Hi I tried install Firewall Analyser, it works fine but I would like to change mysql server to my dedicated mysql server in another computer. I created database name firewall, privilege, tested connection to server 'mysql -p -u root ip firewall'; then changed file mysql-ds.xml, but Firewall Analyser doesn't work - Unable to start MySQL server on port 3306. Please free the port... I read forum and found to try disable start DB server in file nms-service.xml. I tried it, but Firewall Analyser doesn't
Interface error alarms (switches & Routers after upgrade
Hi, Ever since our upgrade to Version 7 of OpManager (patched to 7023), we have noticed that we are getting a large number of "Error Rate" alarms on a large number (over 100) of our switch and router interfaces. Previous to the upgrade we never saw any alarms on interface errors and were under the assumption that all was right in the world of OZ. Unfortunately this problem is causing several hundred alarm emails a day now and is getting quite frustrating especially after chasing our tails thinking
CPU Utilization is "-1"
I monitor the CPU Utilization with SSH,but I get the value is "-1",(see the Attachment). My OS is linux Redhat as4.0.
Performance Monitor - Cannot add Free Disk Space (WMI)
Version 7023. I'm switching from using SNMP to WMI, and have sucessfully changed free disk space performance monitors on other servers, but i have one that just doesn't list the Disk space monitors after i try to add them. I can add CPU Utilization using WMI and it works, just not Disk. I have tried the following suggestions to get WMI working found here: -http://support.opmanager.com/AddSolution.sd?solID=2720 -I also made sure the Device has the proper domain account to gather information and testing
Opman 7, edit actual monitors
where in Opman 7 can one edit the actual monitors for instance the Partition Details Percentage SNMP monitor?
Improving Performance
I am attempting to evaluate moving from an Open Source network monitoring solution to OPManager, but have run into a real perfomance bottleneck. Current setup: VMWare ESX Virtual Machine (2 Gb RAM, 2 Processors) for the OPManager station. MSSQL backend database Gigabit Ethernet Connection I have approximately 45 switches (mix of Cisco and DLink) entered and discovered, but the discovery process (or just about any process) is taking a very long time. Are there any tuning parameters that I can set
OpManager 7.0 on 64 bits Debian
After several hours fight on 64 bits Debian ... so now it's working There are several problem I have now, so I'd like to ask if anyone has same and have solution for them: 1) In Discovery I can't use CIDR cause it tell me that discovery failed.... So I can use only start to and by IPs 2) on my servers it recognize 10Mbs on 1Gbs network card ... but on the graph it's true ( example 45Mb/s = 450% !!!! funny a 3) On Cisco switch It's discovery some interfaces as 1G some as 100Mb/s , so I agree that
Create a custom view of requests for standard user
I would like to create a custom view in which a standard user can see all requests in the system. I have been able to create a new custom view that technicians can see but not that standard users. Thanks for your help in advance, Terry
OpManager on Debian
Hi to all, I installed OpManager 7.0 Pro for testing on Debian Lenny ( 64 bit ) so it was very difficult with 32 bit support but I did it ... So now I have several issues: 1) All of my servers are with 1Gb network card ... so OpManager discover that interfaces are to 10Mb/s 2) On Cisco switch interfaces ( all are 1Gb ) some of them are connected to 100Mb clients so It's right to discover that in and out speed are 100Mb/s , but Interface but be ( because it is ! ) 1 Gb/s 3) On servers I have apache
How to Change Threshold values in default Template MSP 6005
Need to know how to change the default set threshold values for the Windows Server & Service set in Operation Manager MSP Edition 6005. Rather than changing it for the Each Server & Devices...
Traffic seems not to be correct monitored
Hello, we are testing Firewall Analyzer since a few days. We have about 6 Firewalls in monitoring at the moment. What we see is, that some firewalls show extrem traffic. F.ex. our PIX should have received 8GB of data within 10 minutes. We talked to our provider and he told us that we have less then 1GB the whole day. We see that behaviour on many Pixes. See attachment... Can you please help? Thanks, Marco
Error parsing MIB
Hello i cannot load the following MIB. Following Error Message: Could not parse the file D:/Appl/ADVENT~1/ME/probe/./mibs/anx_mib_120-MIB Couldn't resolve these MibNodes : { wtWebioAn8PrtclHttp, wtWebioAn1PrtclHttp, wtWebioAn2PrtclHttp } Where is the Problem? Thank's for help Greetings Dan
How to disable browser auto-launch?
Hi, I would like to disable the browser auto-launch when the server starts up. This is possible in SD+ by commenting out a section in TrayIconInfo.xml, but since you've implemented a very different code base in OpManager, no such option seems to exist. Is there another way of doing this? And can I also disable the browser splash screen (which, again, can be done by editing TrayIconInfo.xml in SD+)...? I'm sure you've been told this already, but opening a browser under the LocalSystem context is a
new IP addresses
hello support, i've just changed my Internet provider so i've changed some IP addresses. Despite all monitors are using a name instead of an IP address, monitors continue to access the old IP addresses. How can i fix that ? Thk U PS: i have 60 monitors and about 20 have to be modified. IEC-IT Department
new IP addresses
hello support, i've just changed my Internet provider so i've changed some IP addresses. Despite all monitors are using a name instead of an IP address, monitors continue to access the old IP addresses. How can i fix that ? Thk U PS: i have 60 monitors and about 20 have to be modified. IEC-IT Department
ISA Proxy Log Import
Hi, I am just trialing your software with a view to purchasing it, but just have one question. I understand that I can import the isa logs every xx minutes, which I have been able to do via ftp, but our proxy logs at the end of each day roll over to a new file. Is there a way of getting the files to import when the next days ISA logs are created. I have found the following on the forum regaring a patch which sounds like it may do this, but wasn't sure: http://forums.manageengine.com/forumHome.do?forumGroupId=49000000002007&forumTopicId=49000002678403
How to edit user details
When you click Admin � Users Under the User Configuration block there is a list of names with a choice to Edit or delete. If you click the edit tab the only thing you can edit is the password. I want to be able to edit details. The Quick Start Guide gives the impression I can edit Contact details and access details. I have full admin permissions. In the steps below it calls the button/tab/icon User Manager. The button/tab/icon I see just says User (it�s an icon under Global Settings) Please let me
Next Page