Active Directory Updates to and from Service Desk
We would like to have the ability to edit requestor information form the help desk and have it update active directory as well. We would also like to be able to search ad changes more then once a day.
jmx MXBeans support ... buggy?
I�ve created a jmx MXBean object returning a few integer and double values. My object is recognized by Application Manager 8 but it refuses to treat values as numeric and thus refuses to generate reports. What can I be doing wrong?
ServiceDesk VS Remedy - Opinions?
My company currently uses Remedy for call tracking and asset management. Unfortunately, we don't have the staff to manage this beast, and the performance is garbage. On top of that, entering a ticket or an asset takes an eternity. I'm looking at ServiceDesk because it appears to offer everything we need, has a great interface and doesn't require any special training to make changes. Has anyone made the switch from Remedy to ServiceDesk? Even if you haven't, I'd be interested to hear opinions on how
Replies to requestor replies and new request notifications
When replying to new ticket notifications a new ticket is created as well as when replying to a requestors reply from email a new ticket is created. Can this be fixed?
how to change timing in reports?
in app manager 8 I want to run a report to monitor telnet traffic, here is the problem if I go into the monitor for that telnet device and look at the response time it shows it to me for the past 1hr which is great because it has more samples, so in this case I see 500ms in a few instances if I go into reports, services, telnet, response time then I get a different graph which is doing averages by the look of it, it shows me the highest is 200ms but it says below it min 10ms, maximum 3200ms, average
Can't View Accounts In Request List
Support, I have tried again to upgrade to both 7001 and 7002 (found on your archive site). When looking at the Requests tab, none of my requests have an Account listed. It just shows - . This happens with all the different default views under "My Groups" and "Requests". The custom views that I have created under "My View", show the Accounts in the list. Although, if I create a new custom view that is identical to one I already have, it will not display the Account. In addition, if I view the Request,
WARNING: insufficient hard disk
Hi, Having just installed the ApplicationManage application when starting using the supplied startupApplicationManager.sh scripts I receive a warning in the startup logs: ************* WARNING : There is insufficient hard disk space for proper functioning of Applications Manager. ************* Examing the startup logs there is an entry saying Disk free: 0Mb This is simply not true as the results of the df -k report that all mounted partitions have mulitple GB's of free space. The software was installed
changing IPs - hosts appear "down"
hi, my client machines to be monitored are connected to the Eventlog Analyzer host by VPN to which they are irregularly disconnect and reconnect - which means, they tend to have different IPs all the time. Eventlog Analyzer seems to remember the host by IP, which means, the hosts are constantly flagged with "Access Denied" because Eventlog Analaizer connects to the wrong, the old, IP. is there something I can do about this? PAT
Switch Port Mapper stuck "In Progress"
I am attempting to use the Switch Port Mapper to scan a Cisco 6509 switch. I have successfully added the switch and SNMP community. I am scanning this switch now but it has been stuck at "In Progress" for nearly half an hour. Is this normal?
tasks in change request shows null values
any idea of this one.. when a change request is created, and a task is created, an email goes to the technician regarding this task, but most of the fields shows null values, and the task doesnot specifically state for which change request this task is assigned to.
Switch Ports Operationally Down
Hi there I have a number of Dell switches that we use in our network and monitor with OpManager without any issues. I have recently added a new switch to the team and it reports all the ports that have nothing in them as operationally down. I have a number of other switches that only report as down when something was there and no is not there any more. However with this new switch I am getting errors saying that ports that have never had anything plugged in are operationally down. Here is the specific
Issue w/ "Problems" list
We have a particular "Problem" incident that has 77 requests attached to it yet only the first 25 or so are displayed and there is no option for "next page" We are running SDP 7009 Windows 2003 server.
Service Desk Plus cannot be opened on vista with IE7
I have a service desk Installation and i can access the web interface from XP but not from vista. I am getting a blank page. Please help
HTML Forms in Request Templates
I created some HTML forms for our user request templates for new hires. In IE 6/7, the user needs to double click the form field to enter information. This is for input fields, drop down boxes and checkboxes. In Firefox, drop down boxes work fine but input fields and checkboxes do not. Any ideas? Does ServiceDesk support HTML forms in request templates? If not, can it be something that can be added?
department name and job title
Where exactly does it pull the department name and job title information from when you do an active directory import? I have a pretty messy AD setup that we are trying to clean up, and it leaves us with several different groups of strange names that we would like to find a way to merge and further control.
Install Service pack 7011 on build 7010 - failed help
My environment is Ubuntu 7.10 I am attempting to to upgrade from 7010 to 7011. From these upgrade instructions: (http://manageengine.adventnet.com/products/service-desk/service-packs.html#sp) Instructions to apply the Service Pack / Hotfix 1. Shut down ServiceDesk Plus Server. 2. Run the script UpdateManager.bat (UpdateManager.sh for Linux) in the <ServiceDesk_Plus_Home>/bin folder. This opens the Update Manager tool. 3. Click "Browse" to select the Service Pack file (AdventNet_ManageEngine_ServiceDesk_Plus_<Version
Archive old raw data
Hello! Our company used the Crannog NetflowTracker for collect Netflow raw data. And now the think to migrate to the NetflowAnalyzer. And we have question: How we can save or archive old raw data for longer period(more than 1 month)and use it to make the reports in NFA?
Technician Notification - closed tickets
I would like to set up email notification to all technicians when a ticket is closed. I do not see this option in Notification Rules. Can this be done?
Verifying requisit ports
Hi all, We are setting up a new SDPlus server and I just want to verify what ports I need to have opened. I assume that 80, 25 and 100 will do everything for logging in from the out side and checking / sending e-mail. Are there any other ports I need to open? Thanks, Dom
DHCP servers
I have problems getting some of my dhcp servers to get added. I tells me they do not have DHCP enabled but they do. And snmp is working as I monitor all of these servers in opmanager, etc. Also, some locations have a cisco 851 giving out dhcp, would be nice if I could monitor those. Thanks!
Rogue Detection -No DNS-
We are evaluating OpUtils4 and when we run the Rouge Detection and we are experiencing the following results: -Many of the entries are showing up with no DNS at all, just the MAC address and sometimes the IP address of device. -Many of the entries on the DNS name are showing up with the IP address. -There are many workstations that should have came up in the results on the scan yesterday, but did not show up until another scan today. -What does it mean in the "Switch Details" where it states many
Monitor MS exchange traffic
Anyone have a good way to monitor Microsoft Exchange traffic with NFA? The Client ports are random, I haven't found a way to set up an application mapping for it. Thanks!
Rollback from 7.0 to 6.5
Support, How do I roll back? I have found way to many issues with 7.0 that are causing me grief. Am I stuck using the backup I did prior to the upgrade? Or can I roll back using the current databse? Ken
All scripts monitors are under maintenance
Hi, All monitors scripts are under maintenance while I have no downtime scheduler. How can I solve this problem. Recents actions : Upgrade to Application Manager 8.2 Best regards Stephane
Notifying Requester when Technician Replies.
Hi, we have a few technicians that travel most of the time. These techs have the ability to send/receive email messages from their cell phones. When they have a ticket and the Requester sends in an email response, we have the option to notify the technician of that response. If the technician has needs to reply, he has to find a computer, login to Helpdesk, then send the response. If he could reply directly to the message and have SDP notify the Requester of the response, that would save us quite
Hotfix 7001 released...!!!
Hi All, Hotfix 7001 just got released. Thanks for your cooperation during this period. Please download the build/hotfix from here : http://manageengine.adventnet.com/products/support-center/download.html The list of issues fixed in this hotfix is available here : http://manageengine.adventnet.com/products/support-center/sp-readme-7.html Rgds, Vinu Sreedharan
Hotfix 7002 released...!!!
Hi All, Hotfix 7002 is released. This hotfix has some important report related fixes. Please upgrade. Details available here : http://manageengine.adventnet.com/products/support-center/sp-readme-7.html Please download the build/hotfix from here : http://manageengine.adventnet.com/products/support-center/download.html Rgds, Vinu Sreedharan
Associating Minor Software: Adobe Versions
I have Purchased 18 Liencenses for Adobe 8. When I scanned them in, everything turned out great. Since then I have updated them and have some version 8.1.0 to 8.1.2. When the workstations are scanned it shows up in the software. I tried to associate the minor version however, it throws the licensing completly off. It shows that I have 18 licenses but 36 installations. Could you please help!
Software licenses bound to machine only?
A large portion of the software deployed in our environment is licensed to a user, not to a machine. For example, under our MVLS agreement with SA, one single MS Office license can be used for two local installations, as long as they are both used only by the same individual; hence user Joe Smith may have one license covering his software installation on hosts JSMITH1 and JSMITH2. It seems that Individual licenses can only be associated in a one-to-one relationship with workstations, rather than
Need download for older SD+ version... where?
I need to install SD+ 7.0.0 build 7005 on a test server so that I can test a database migration. I can't find my production download of that version, and I can't use the current download version (build 11) as my test version (to restore a copy of my production mysql data to the test server I need the same version SD running. Where can I get the build 7005 download? Thanks!
URL authentication
Hi Support, I'm trying to set up authentication for URLs for the following website: https://www.mcc.ca/mcconline How can I configure authentication username and password for this application? Does OpManager support this method? Can you please explain in what instances the authentication would work? Thank you in advance! Derek
snmpd dead but subsys locked
snmpd dead but subsys locked How to enable snmp in linux system,can any one help me to resolve this problem Regards Lokesh
Event Log Alarms
Hi All, I have downloaded OpManager in order to get file conflict alerts from the 2003r2 DFS. Unfotunately I cannot see a section for adding rules to the event log for DFS. Is it possible to generate an alarm from the DFS log in some other way?
OpManager fails to...on a cleared alarm
Page/Log a Ticket in SD/Send Emails when a monitor clears. I've noticed this for a long time, but figured it was due to multiple upgrades of Op. However, after a fresh install and a fresh setup the issue is still there. I'm on the latest version of v7 (7025). I've setup monitor in Op to watch our routers and sometimes we will get paged when an alarm is cleared, but not other times. Routers will page sometimes and not others. I've re-associated the notifications several times and it will work for
Exchange Reports
Exchange report that lists accounts and associated alias' alec ondrusek
configuration database_params.conf
good afternoon to all! I am with problem in the configuration of database_params.conf. I am trying to migrar my bank mysql for mssql 2005, but only with the DBconfiguration I am not obtaining. I made the necessary creation of the bank with the name and parametros, but exactly thus the program does not obtain to see the bank. Alguem knows ce is to necessariofazer a configuration in database_params.conf program to be able to see MSSQL to it 2005?
Supported Linux Versions?
Hello, Okay so we bought this software more than a year ago (we're on our second service contract) and we're finally getting some time to get it in place. We got a decent DL380 with a ton of disk, 4 3GB cores, and 4GB RAM. It's racked and powered and it's time to get the Unix team to give me an OS. They're suggesting we go with RHEL5 x86_64. Will you support that platform? Thanks, Daniel
NBAR support
How do I get Netflow Analyzer to read the NBAR data from a router? I do not have an SNMP write community name for the router. Can I get NBAR enabled on the router without a write community string?
User list in OU
A report that list out all the user in each OU carmelcw
User Logon Report
I need a report to tell me what computers a user has logged into based on specified time frame. Jason Poort
Next Page