Agent queries shows red, Monitor did not respondI� m als
Hello, I saw a few other threads regarding a similar problem but I did�nt find out a resolution sifting through the messages so far, thus here it goes.. I� m getting problem with the CPU Utilization resource monitor, when using the linux-based OpManager, latest version. Please note that the Windows version works quite satisfactorily but I need to run the linux version. This query affects the OID .1.3.6.1.4.1.2021.11.9.0 but many others, if not all, are ill-behaved in the same fashion. Put simpy and
SMS Notification via GSM Phone
To whom It May Concern, I notice there is a notification profile that you can send an email message to third party email to sms provider. I have tried the Gnokii with Nokia 6310i cable attach to the Opmanager 6 on Fedora Core 5 . I have accomplished the installation on OpManager and Gnokii separately. I want to know if I can modify OpManager notification profile that allow me to send sms message via Gnokii. The following is the command that I can accomplished within command shell. echo "This is a
Feature roadmap?
Can you all provide some insight into what features you plan on putting into OpManager in the future and I know you do not like to put a date on it but can you let us know about when you plan on putting it in.. IE what quarter of 2006 ect? If you list out a roadmap for features it will help everyone that uses OpManager because they will know what features they do and do not need to request for future rollouts. Thanks!
cluster hight available
Dear Friends, Is possible install and running the OpManager in cluster (HA)? Regards. Thanks []s
Can't remove resource monitors
Hello, I have problem with removing resource monitors from the list. Once when I add resource monitor I can't remove it from the list. I have to unmanage device then configure it from the beginning. Could you please tell me if there is any workaround for this? Build Number : 6002 Thank you in advance! Best Regards, Ivo
trap display problem
Hi, my traps received by opmanager as displayed below: Attention May 17,2006 08:44:20 PM convertercoldstart is received from 10.226.200.107 with the following related information : sysUpTime: 0 hours, 0 minutes, 0 seconds. , .1.3.6.1.6.3.1.1.4.1.0: .1.3.6.1.4.1.3830.65.1.1.100.2.1, .1.3. Critical May 17,2006 08:38:43 PM convertercoldstart is received from 10.226.200.107 with the following related information : sysUpTime: 0 hours, 0 minutes, 0 seconds. , .1.3.6.1.6.3.1.1.4.1.0: .1.3.6.1.4.1.3830.65.1.1.100.2.1,
Status Message when trying to view Domain Controller Systems
I am getting this message when I try to view any of the three Domain Controllers that we have in Opmanager 6. Status Message Unable to fetch Managed Object details for the object : usltl2.system.usltl I can't get to them to remove them. Even when I try to readd them to the system it doesn't work. Please let know what I can do. Thanks
License Failed: ERROR CODE : 500
Hey guys about 2 weeks ago we received this message we registering we have emailed you guys asking for a new license for 6.0 we have still not heard from you guys when are you going to email us back about this someone please email me about this and I will email you proof of our license key
disable alarms for unmanaged Servers
Hi, In my Desktop group I have a lot of Server that I currently do not want to manage, so I "unmanged" them. However they still generate Alarms. How can i keep unmanaged Devices completely silent? Thanks
Reports - No Data Available
hello, On th home page, i see the top utilization (CPU...). But, when I'm going to Reports, and choose any report, i have : "No Data Available Click here for troubleshooting tips. " I shutdown the opmanager, and use RepairDB.bat, but i don't see any report... I have Opmanager 6 Build N� 6003.
problem with creating a business view
Hi, I have a lot of business views in mapmaker. Now i have create a business view which shown in the business view map but i can't see it in the business view tree. How can i solve this problem? Thanks Emti
blue stars
Hi, just a quick one. What do the blue stars mean in the network views to the top right of the server/pc icon. some of my servers have it and some dont.. thanks. Matt .
OpManager Memory Utilization high
I am managing a Win2k Standard box and the memory utilization consistently says 100%. Although, when I manually check the available memory on the machine in task manager it says more than 2gb of the total 3gb memory is available. Please let me know what could be causing this. Thanks, Neil
Win NT 4 Monitoring problem
hi support, i've installed SNMP on win nt and configure it according to the manuals given. at the end, unable to activate SNMP service. please help
Disabling alarms
OpManager constantly logs alarms related to the ports that are down on my switches. Since these ports are not down, there are simply no devices connected to them I would like to disable that particuar alarm and have so far not been able to find a way how to do that.
Can you set specific times for monitoring??
Is it possible or can it be made possible to change what times devices are monitored. For example for some servers we want to be able to set threshold rules for during the day activity while in the evening hours it is not so important to monitor thresholds. We want to be able to set specific times for when these monitors kick off a violation notification.
CPU utilization and backplane util for CISCO 3750
Hi! I cannot make dial meters to work for CPU and backplane util. to work. I tried to walk MIB, but there is no such OID as is requested for these two parameters. Device is: Cisco Catalyst 3750 Series Any help?
OpManager Categories
I was wondering if there was any way to add more categories besides printer, server, routers, domain controllers?
Device Name Changes
When adding a device initially it is binded by either its hostname or ip address. If the name of the host has changed and I've also made this change in device details it won't change the hostname of where it was pointing to. I've looked in admin and everywhere else, maybe I'm missing something here?
msp edition
Hi, Last week I had a question about the MSP Edition. Now I would like to know the answers to the questions below: (Since we are using the Opmanager) - How can I upgrade the Opmanager to an msp edition? - How can I place the information saved in Opmanager to the MSP Edition? - How much does it cost? Thanks Emti
Can Opmanager 6 monitor HP-UX machine ?
and how I upgrade from Opmanager 5.x ??
backup configuration
hello, how can i backup the configuration ( servers names , ips , monitors and notification profiles) without making backup to the database ? , i just want only the configuration
How to Increase Session Timeout Limit
is there any way to increase the session timeout for Op Manager build.. we keep getting this message and have to log back in after less than 5 minutes "Your session had been timed out for security reasons. Please re-login" regards - glen
data base schema
Hello can you provide us with the database schema so this will help our DBA to extract our needed reports for availability ? as lot of companies did like IPswitch , they provide a document for the database schema , i think this will be really great . thank you
Getting Started with OpManager
Hello, What is the best method with getting started with the OpManager program? I am trying to run a couple of tests as a newbie. Trying to get the disk space running along with the memory utilization. Thanks for your assistance. g
Response time report for routers
Hello, How can I generate response time report for all routers ? (One report for all routers)
Terminal Server
Hi guys, I was wondering if you could help me customize the monitoring of the eventlog on my terminal server. I would like to customize and define what to monitor, as in only the APPLICATION $ SECURITY logs, and in those logs, filter out only the errors and warnings. Basically, the monitor will send out a notification when a specific error or warning is found in the specified logs. I am not sure how to do this and your help will be greatly appreciated. Thanks.
APC UPS - only seeing load and charge
Hi, I'm just playing with OpManager 6 and have an issue in getting values displayed for anything other than UPS Load and Charge for the device. I suspect the problem is that I am using the APC SNMP extensions supplied by the APC agent which is running on a Windows XP PC - so maybe OpManager refuses to believe the node is supplying the APC OIDs. I have already changed the Device Type to APC UPS but this did not make any difference - I assigned an additional IP address to the host node to use purely
Wrong URL clear notification
In OpManager I defined URL monitors on the server device. I added and assigned a mail notification to send mail when the URL is down. This works but after when the URL is up again I got several Clear messages: four times the same message: Clear - fkdwebp2.bl.ch Message: The URL http://kwwintrexx.fkd.bl.ch is Up Device: fkdwebp2.bl.ch Category: Server Error Condition: Clear Generated at: Apr 25,2006 12:19:19 AM and again two times this message: Clear - fkdwebp2.bl.ch The URL http://kwwintrexx.fkd.bl.ch
MS SQL Monitor - Cache Hit Ratio always 0.
I have the Cache Hit Ratio monitor for SQL server setup and it's always displaying as 0. If I use perfmon on that server I can see that I'm hovering around 99%. All the other SQL Monitors seem to work just fine.
Device is stuck in list, can't delete
Have a device that I think I tried to delete, now shows in the list but with no icon, red x when I click in all I get is Status Message Unable to find the object : ftp.vk7ax.ausport.net
Memory not reporting right
I have a SNMP monitor watching a dual processor server with 4GB of ram, the CPU seems to report back ok, but the memory is reporting 93% usage. When I log in to see whats going on with the server the mem usage is at less then %10 The opmanager is running on linux and the server is windows 2003
new User comments
I've installed the free version of opmanager to test out the monitoring of our WAN Sites. Here are a few things I found so far after a week or two of playing with it. Adding monitors is painful - I want to enable the following traffic monitors - Rx and Tx errors, discards, traffic and utilization. Adding each monitor in individually is kind of painful. Why can't I check all 8 monitors and say apply to either a specific device, or add it to all devices of a specific type. Port changes - In order to
Device Type and WMI access
Hi, I have various Windows XP computers that I'd like to change the device type from "Windows XP" to "Windows XP Tablet", "Windows 2000", "Windows 2005 MCE". However, once I switch to these new device type, SNMP, WMI no longer work? Is there a workaround for this? Thanks.
Spanish characters in OP Manager
Hi there, We have some specials characters like " � ", and some of my PC's has this character in the PC name. OP Manager reads this character as (in HTML code � = à ±) We can't clear the alerts for PC's with this simbol in the name of the machine. Please, any idea? ex: coru�a -> coruña ( I put the HTML codes cos I can't write the ASCII codes). Daniel Lopez
software
Hi, Is there a software which can manage the devices without a tunnel and it can be used with opmanager. (such as Remote Agent) Thanks Emti
Response time report for routers
Hello, can I generate response times report for all my routers at once ?
Can't remove Resource Monitors from the list
Hi, I can't remove any of the Resource Monitors from the monitor list. Could you plese tell me is there any workaround to do that? Othervise I have to delete node form the list then I need to add all needed monitors again. Thank you in advance. Best Regards, Ivo
Tracing an IP address in NetFlow
I am using OpMan to track my Internet traffic. I am seeing a tremendous amount of traffic going to "205.161.6.57" on http. I have tried to connect to it to see what it is but I get a bad URL message. I tried DNS Reports but nothing came back on it. Does anyone have any ideas how I can track this down to see what it is? :D
OpUtils & OpManager on the same server
I am currently testing out these products and I have noticed a problem with them. They don't seem to like being logged in together. I log into OpUtils and start doing something, then I log into OpManager, if I switch back to OpUtils the session ends if I log back in and go back to OpManager the session ends. Not a huge deal but it can get annoying when trying to get a lot of things done.
Next Page