Help needed with adjusting/modifying graphs
Hi all, I run into a problem which is quite annoying to me.. :( We've some AKCP Environmental SensorProbes hanging around. We've the 2-ports and a 8-port version of these devices, but not all of these devices are fully equiped with sensors in both or all ports. In 3 of the 2-ports devices we've all ports occupied with a sensor that measures both temperature and humidity. In the 8-ports device we've in port 1-4 watersensors and in port 5/6 Temp/hum. OK.. I've managed to tell OpManager where to get
OpManager is locking out my account!
My user account is being locked out about 6 times a day. At first I thought I had a terminal server session somewhere. But eventually after I did an eventcomb on the Domain Controllers, I traced the account lockout to a new server I built to contain only OpManager. Whenever I shut down the OpManager service, my account stops being locked out. I haven't changed my password at all because its set never to expire. Whatever it is its related to Opmanger. I'm at the point of uninstalling OpManager completely
Custom Monitoring
I am just starting to use Opmanager for monitoring our servers and was trying to find out if its possible to have it monitor/provide graphical information from data that is in a text file on the server. We use virtuozzo for virtual private servers (VPS) and there is a command the we can run on the server that can tell you how much of the CPU is being utilized by a virtual private server in relation to the amount that is actually allocated to that VPS. What I would like to do is put the command in
Recommended backup strategy
Hello, What method/software/etc do you guys recommend for backing up OpManager and its data? Thanks.
Switch Port Mapper with non router
Hello all! I am trying to use the switch port mapper and do not have a router on a few of my ip ranges. When I attempt to use a machine that is windows 2000 machine running snmp it fails saying it is not a router. I have another tool called SolarWinds that lets me do this with out any issues. Can someone help me..
Wake On Lan
Hi, I just downloaded OpUtils 4 trial version. I am more interested in wake on lan part more then the rest. when I tried to wake up PCs in other subnets, I get unable to contact after 6 minutes and the DNS name doesn't work outside the Subnet where the software is installed. My question is what ports do I need to open to be able to wake up all PCs and get DNS info on all networked PCs? thanks, Aziz
OpManager Scaling
How does a single OpManager server install scale? What is the maximum recommended number of devices for an installation where we are monitoring approx 10 services, 4 resources, and approx. 10 misc monitors per machine. Also, does OpManager support Syslog?
discovery blocked by antivirus
hello, one of my customer got a bizzare issue, he is using the following antivirus: Trend Micro version 7.3 while this antivirus is on, he cannot discover this PC, but once it is removed , the discovery goes on correctly, i am going to simulate that in my lab, but wanted to know if anyone has alrady come across similar issues...
ERROR# Access is denied.
Where can I find out and also set the account that Opmanager uses to authenticate itself so that we can discover the network as well as if I wanted to search services on a specific server. When I go into a specific server-->Windows Service Monitors-->Add Monitor --> Discover services on this device, that is where I cannot view services. I get an error which says: ERROR# Access is denied. Why does this happen????
Default threshold settings
Hi, Is it possible to globally change the default setting for a monitor threshold? For example the OS Processor Queue Length threshold is set to "Critical" severity and a single consecutive violation. I would like to globally change this to have "Attention" as the severity and only to be triggered with 2 consecutive violations Cheers Doug
Business View
I am currently running the free trial for 20 devices, do you have more tools to edit the business views in the full version?
Access client via Internet
Hello everybody, i installed OpManager on a network workstation... and it works great, i can monitor the network, but only from that workstation. Can i monitor the network when i'm at home using the internet? Thank you
Custom Monitor Alarm:Threshold doesn't clear itself
I have created a custom threshold for an HP diskdrive failure. The values are 2 when drive is operational and 3-10 when it's not. I set threshold at 3, and re-arm at 2. The drive has been fixed aka value=2, but the alarm is still there. Any help?? Thanks, Mark
Feature request - Notes in event log rules
Hi, Would it be possible to create a "notes" field in the event log rules so that a description of the reason for the event log rule being created can be stored. Cheers, Doug
Hotfix for OpUtils 4
Hi All, The latest hot fix (build number 4004) is available at http://bonitas.adventnet.com/netutils/22Sep2006/ManageEngine_OpUtils_4_0_SP-0_4.ppm and the complete exe and bin download are available at http://manageengine.adventnet.com/products/oputils/download.html The issues and features added in this hot fix are: 1. Ping issue in Switch Port Mapper is fixed 2. Issue in Monthly & Year data calculation issue is fixed in Bandwidth Monitor tool 3. Email Alert notification feature is added in Rogue
Error when clicking CPU Utilization View Process Stat Icon
Hi, I always get an empty window with Error (in bold) everytime I click on View Process Statistics Icon in CPU Utilization. Here's a snippet of the log. Nov 27, 2006 1:04:43 PM com.adventnet.persistence.Row validate WARNING: WARNING::The column RULEID in ServiceRuleList is given a value that is instance of java.lang.Integer that contradicts with BIGINT specified in data-dictionary. Nov 27, 2006 1:04:43 PM com.adventnet.persistence.Row validate WARNING: The column RULEID in ServiceRuleList is given
Logfile Messages
Hello, whats the purpose of the followfing messages: 1. "ALERT: Time taken for getting the data for Custom View ActiveAlarms : 31" in "nmsout45.txt" (every two minutes a new line in the logfile) 2. "APPLNERR: Login Failure:" in applnerr49.txt where can i see which device is affected? thank you, martin
SNMP - CPU, Memory and Disk Utilization sometimes missing
Hello, I've installed OpManager build 6005 (running on RedHat FC 3) and I'm monitoring about 150 Solaris 8 servers via SNMP (NET-SNMP version: 5.1.1 on the Sun Boxes). During my testing I've notice sometimes when I go to a system the snapshot either CPU, Memory, Disk will say "Data not available" or just one or two will say it. If I go to test it and then go back to the snapshot view the graph will be there and the "Data not available" will be gone and it will continue working... and then sometimes
Opmanager device snapshot
Hi all, When you go to device snapshot page, every interface (both managed & unmanaged) is displayed in it. Is there any way to remove these unmanaged interfaces from the device snapshot page. (eg. If I'm monitoring a router with serialport, LAN port and some async ports, & I need only to manage the serial port. SO i want only that port to be displayed on the snapshot page) is this possible? thanks & regadrs Sampaths :?:
Blank page with Error! in bold!
Hi, When i click on Resource monitors (for adding them to a device, or for configuring them in the Admin page) i get a blank page with just the text Error! on it .... in the stderr file i find th following: 16:46:33:955 PM java.lang.ArrayIndexOutOfBoundsException: -1 16:46:33:955 PM at com.adventnet.me.opmanager.webclient.util.WebClientGraphUtil.getVector(WebClientGraphUtil.java:433) 16:46:33:955 PM at com.adventnet.me.opmanager.webclient.util.WebClientGraphUtil.getGraphProps(WebClientGraphUtil.java:289)
Problem with boton ,don`t show well the label
I have this problem ,I can`t see the botton well, Helpme please
Sybase Services
Hi all, Anybody can help me, how to monitor Sybase services, instead of Oracle services. Thanks
Busiess views suggestions
Business views are great! Here are some suggestions to make them even better: 1) Text blocks - add a text object to a view 2) Image objects - ability to add images to view that are not associated with a device (an image of an empty rack for example or an internet cloud) 3) frames - ability to add a frame so you could put a line around a group of related devics and label it (with #1 above of course) 4) URL objects - Have seen the work-around of putting in device, not quite the same. 5) Line tool -
Locked out of OpManager
A fellow staff member was recently playing around with the admin account of our OpManager and has locked us out. We receive the follow error message when trying to login with the admin account: "Error in downloading client files from BE" I haven't had a chance to look into it yet or even ask what he was doing when it happened. Does the error message give you guys any clues to solve this problem quickly? Thanks.
Not receaving e-mail notification for devices fails
Hi all, I have created a e-mail notification profile and tested it. Then in the The Quick Configuration wizard i have Assign a notification profile to all devices with all criteria and i'm not receiving the e-mails... any ideas? Am i missing anything? Funny thing i'm receiving the e-mail notification from URL monitors.... Tanks, Manuel Pereira.
device down - notification issue
Hi, I've installed the s/w. Configured and tested email alerting, and when I turn off a server which is monitored, I see the alert is registered but I do not receive any email. Any suggestions?
java error
Loaded latest on gentoo and recieve this error when starting the server script. ./StartOpManagerServer.sh Cannot resolve hostname. Using localhost by default inside addon check SQLException while getting database connection. Check if database daemon is running java.sql.SQLException: Unable to connect to any hosts due to exception: java.net.ConnectException: Connection refused at com.mysql.jdbc.Connection.createNewIO(Connection.java:1794) at com.mysql.jdbc.Connection.<init>(Connection.java:559) at
Multiple Installs of opManager
We have purchased a single user copy of the opManager Premium. Currently we have all of our devices monitored by one server. Is it possible to install the software on another server to be used as a backup server at a different site? Would we need to purchase an additional user license to do this? Is it worth doing? Thanks for your input.
OpManager 6 SSL Support
Hello, Does OpManager 6 support SSL ? What are the steps to be taken ? Marck www.ccv.nl
Custom MIBS for EndRun Technologies GPS Time Server
We are using EndRun Technologies Unison GPS Network Time Servers in our networks. I placed the MIBS file furnished by the vendor in the MIBS folder. How do I get this device to show up in the Vendor Specific Monitors? I have include the MIBS file furnished by the vendor for your review if necessary. Thanks.
Cisco ASA giving back odd snmp data
We are testing opmanager to replace our current monitoring tool but I have hit a snag. Our ASA 5520 reports back this data and I dont know why, cacit works just fine. .1.3.6.1.4.1.9.9.41.1.2.3.1.2.0: 20, .1.3.6.1.4.1.9.9.41.1.2.3.1.3.0: 7, .1.3.6.1.4.1.9.9.41.1.2.3.1.4.0: Syslog Trap, .1.3.6.1.4.1.9.9.41.1.2.3.1.5.0: <166>%ASA-6-302021: Teardown ICMP connection for Am I missing something? oh it also shows as a Cisco 2500 Router... Thx for any help! Mike
Cannot connect to client on RedHat Fedora
I cannot connect to the client on RedHat Fedora 4. I run StartOpManagerClient.sh as root and then attempt to login to the client. I simply get a popup box that says "Check Server Name." No matter what I type into the server name box it does not come back. I have tried localhost, the actual machine name, the ip address, and the loopback address. It never connects. Has anyone else seen this? What am I doing wrong?
alert when a monitored value is other than specified?
Hi, Currently I am monitoring my physical drives status through snmp, because we had some failed drives recently. A drive can have the status: other = 1, ok = 2, failed = 3, predictiveFailure = 4 . It will return a value of 2 when status is ok. If the status changes to 1 or 3 or 4, I would like to receive a notification. But with the current threshold configuration it is not possible is it? Regards
Application Response Time 4500ms
Hello, i've had the same problem a year ago: some server applications had 4500ms response time shows the dashboard. When i had the problem a year ago, a false DNS server was the problem. but now, DNS server is ok. i've changed the network card in the opmanager-server. is this a known problem - is there any solution for this problem? with regards, martin
Versions of OpManager?
We are currently trialing this product (using version MSP Edition build 6002) and I have a couple of questions (so far!). The documentation shows a way of configuring SNMP Trap processors under the admin tab but we don't seem to have that option? In much the same way we we don't seem to have an MIB Browser icon under admin either? Any ideas?
OPManager version 7
hy everybody, how time is OPManager version 7 released. Is a exat date public? please let me know, chris
Error when attempting to load traps
I am trying to load traps from a file. I receive the following error when I try this: IMPORTS failed: Could not open file C:/Program Files/AdventNet/ME/OpManager/./mibs/NETSCREEN-SMI I am running OpManager on Windows 2003 installed in the default directory of C:/Program Files/AdventNet/ME/OpManager. The MIB is in the directory, but it seems that the extra "/./" in the path is causing this not to be able to load. Has anyone else seen this or have any idea what could be causing this? Thank you in advance
New DC - Some of the AD queries result in N/A
We have been successfully monitoring DCs with opmanager for about a year. We've just added an 11th DC, and I'm seeing all N/A for the following: -All performance Counters - All network monitors except Number of Clients I've removed and readded the monitors to no avail. Wasn't there a command-line utility that sometimes is needed to run against the DC? I've forgotten what it is. BTW I do have my user enabled for remote WMI and DCOM access on the DC.
Changing network view address to name
Hello Wondering if anyone knows if I can change the network view addresses (bottom left) to something I can refer to and make it more meaningful in my network. eg 168.192.20.0 to Office Network Is this just a change in the hosts or networks files for linux? Thanks Jonathan
How can i delete the event history
I have 5800 syslog traps in the event history under the alarm main page and i see no way to delete all messages at once. kind regards Itnator
Next Page