Rogue Detection list
Is there a way to delete the current uncleared listing of rogue devices. In essence this would force the software to rediscover those devices and relist them. I am having an issue where I am only getting a mac address returned on some of the devices on my network (several hundred actually) and was thinking that if I could get the system to repopulate these devices in the rogue list I might get some better info. Returning only a mac makes it a little hard for me track down.
treshold rule (lesser than)
Hi all, I am monitoring on of our sql servers through the sql add-on and one of the things to monitor is the MSSQLCacheHitRatio. This ratio should be ideally higher than 85%. Well, I have put our threshold limit on 80% and the Threshold Check when Monitored value is lesser than threshold limit. It will rearm at 81%. Now our monitored value is around 84% and it will generate me an alarm? I'm under the impression that it should generate the alarm ONLY when the value goes below 80%. Am i configuring
VMwared' Fedora Core 6 says Unable to start Mysql daemon
Has anyone had trouble running OpManager on a Fedora Core 6 box? It would keep saying Unable to start Mysql daemon, even though the hosts file does not have any IPv6 lines in it, just the regular localhost line. This was brought up before on an older version of Fedora Core (4 or 5), yet no post of a solution was made public. Anyone know what to do?
How to display simple chinese in SMS alter messages?
Hi I want to send SMS messgae in my SMSserver,but OpManager couldn't send simple chinese correctly. I try to modify smsserver.conf,replace "phone.message_encoding=7bit" with " phone.message_encoding=UCS2", but It counld't send chinese just the same. Have a great day. Cheers, Byron.
Centralized Credential Management
Hi is there anywhere within MSP that the Domain logon credentials for a particular probe can be set in a central location without having to input those credentials separately for each windows device requiring WMI logon
Monitoring Oracle
I can run MibBrowser.bat and ALL the Oracle monitors work! When I change the configuration of MibBrowser to use Version 2c snmp it FAILS. I can run snmpwalk and they work too! But...in Opmanager I cannot get ANY oracle monitor to work so I am assuming that Opmanager is using V2c and failing... Is there a way to force version 1 SNMP for a monitor? Thanks -Wayne
Error in MIB-Browser
Since the last update to 6010 i regularly run into an error message displayed in the MIB-browser. I'm querying a device several times, and then suddenly a message window appeas with the following error message: problem iii [object error] After this message the only way to use the mib-browser again is going back to the admin page and restart the mib-browser. Anybody know where this is coming from .. and more importantly ... how to fix this?
DC devices also need interface rediscovery
Just created a new network team on a DC, and realized these devices do not have the interface rediscovery mechanism. I have really enjoyed Opmanager's capability to rediscover interfaces, because re-teaming is something we seem to do frequently (new teaming software, new hardware, etc). Hope you add this feature soon to Domain Controller devices. Thanks!
Infrastructure URL monitor notifications not working
My pre-existing to 6010 URL monitor notifications have been working right along, until today when I modified the specified addressee. After modifying, I would save and close, then open the URL monitor up again to see the old addresses were still listed, my modifications didn't seem to have been applied. I deleted that URL monitor and started over, and then tested to see if they were working by having opmanager search for a non-existing text string. The URL monitor alerted, as being down, as I expected,
Need help regarding OpUtils
hi i m new to this forum and software as well. i downloaded trial version and trying to check it on a LAN of 8 computers... i need to know -what is community or how to enter its password. i m getting problem with the information section for my own pc (on which OpUtils) is installed.
Graphing tcpRetransSegs
Hi, I'm trying to graph tcpRetransSegs (.1.3.6.1.2.1.6.12.0): - I don't want a graph of the absolute value, since this will always increase. - I don't want it expressed in terms of retransmits-per-second (I think this is what I get when I say .1.3.6.1.2.1.6.12.0/$DELTA_TIME) What I want is to know "the absolute number of tcpRetransSegs in between the current poll and the last one". Can I do that? many thanks, alec
Monitoring a running applications CPU and/or Memory Util
I will search & re-read the user guide too, but am looking for a fast answer. I am monitoring a service, but rather than monitor response time, I need to monitor the CPU utilization for the application/process that sits behind that service. When it hits 50% or higher usage or a memory utilization threshold I need to send an alert and restart the service. How can I set this up? I've been digging through the OpManager settings, but perhaps I'm not focusing in the right area? Thanks!
Multiple instance custom graph
Hi, is there any way to show the name of the instances in a custom graph with multiple instances? Right now this graph is showing the instance number on each instance graph. Thanks. Rodrigo.
Shutdown OpManager via ssh connection
How do you shutdown OpManager server if you are ssh into the server? If you run the ./ShutDownOpManager.sh, a graphics box prompts for username and password. My ssh connection fails because the graphics box cannot be generated. Is there a username and password parameter that can be passed to ./ShutDownOpManager.sh to shutdown down the server?
How to trap Brightstor Arc Server Backup r11.5
Any body know how to monitor traps from Brightstor Arcserver Backup r11.5, I add an SNMP alert in Brightstor. If I review the alert log activity, appear and SNMP TRAP send to de opManager server IP But if I review de alert -> Unsolicited Traps in opManager, the BrightStor Aler dosen`t appear. Any solution?? Thanks Nicol�s Donoso
Oputils Rogue Detection
Hello, I am currently evaluating the oputils software and have a couple of questions on the rogue detection. On my basline list I have come up with several hundred devices that are reporting as having a MAC address but are not showing a corresponding IP address. Any thoughts on this as the devices are going to be almost impossible to track down without some more info. Additionally, any chance that in future versions you could add a field to the rogue detection list that would allow a person to enter
Port descriptions on cisco switches
Hi, Is there any way to get the description field for the port in opmanager to actually display the name given on the switch ( we set this to the actual outlet name so we can map outlet to port ). At the moment they are just coming up 'fastethernet 0/1' etc.. thanks.
Cisco Pix515
Hi All, I cannot get opManager to discover / monitor our PIX515's I have the correct SNMP setup and the username / password configured for the pix? Can anyone help? Thanks in advance Leigh
How to monitor Cisco Pix failover with dedicatet LANFailover
I have the following problem... ..in Opmanger i can monitor two of four interfaces (inside,outside) on my primary Pix. The standby Pix has the same Interfaces (four) and i can monitor the inside and outside Interfaces. But now is coming the problem. Why can i not see the third Interface that is dedicated for Lan-Failover and the fourth Interface is administrative shutdown. I belive if SNMP is enabled on the Pix device all Interface are being discovered from Opmanger with SNMP Poll function. But i
Cisco mib and the right way to compile
Dear Support-Team, i am a newbie in SNMP but i read a lot of Cisco guides and now i have an running OpManager=>Cisco Pix and Router Monitoring-Environment. But the problem i have is that the traps from my devices are showing in OID form. I already did an upload from the Mib-Browser with all required Cisco-Mibs in the right compiling dependency. But is the upload equal to compiling? Must i do more steps for compiling and how can i get more text instead of OIDs in my traps I get to many OIDs from my
SNMP Configuration
I am new to OP Manager and have tried to configure it on all my servers. SNMP is enabled on all my servers but I do not receive my dials nor do I receive the sys Disc. What may I be doing incorrectly? Thank You, Gary
SMS Provider
Hi there, In the MSP version of OPManager is there a way to do SMS alerting via a web based provider ?. For example, www.bulksms.co.uk allow http submissionthat results in an SMS message. See: http://www.bulksms.co.uk/docs/eapi/submission/send_sms/ We use a small product called IPcheck from Paessler which supports this functionality, is it supported under OpManager ?. Any help appreciated, Regards, Steve
Cisco 3750 configuration
I have installed OpManager trial to see if it will fit our needs. I have discovered devices on the network and a lot of them seem ok, but my 3750 does not show any port information as other switches do. I have set a smtp public RO, is there anything else that I need to do? The 3750 is in a stack of two, is this a problem? Thanks in advance for your help. Sebastian
SNMP Question
I am new to this program and I have two ewbie questions. I have set up about 6 servers in Opmanage, they all have the same community string, but one server will not show the dials or pull SNMP data. I also have a server that is pulling SNMP data but i do not get a sys descr. but when i test the Monitors they are working. please help any advice would be helpful
Scheduled report question
I have a scheduled the All Server Disk Usage report to run every night at 2AM and have it sent to my inbox. I would like the report to be sorted by server name as it is when the report is ran from the reports tab. When it is scheduled, the report has no sort order and it makes it troublesome lookup the disk usage on a particular system. What will need to be done to have the scheduled report sort by server name?
SNMP
Hi there, I have bought and installed the latest version of OpsManager and we are experiencing problems with SNMP + the resource monitors. Basically, I am using net-snmp on linux hosts and opsmanager sometimes shows a dial for cpu/memory/disk usage and others times it doesn't. This happens completely randomly and makes fault finding rather difficult. One host might have all the dials working while another only has one dial working. I have ensured that the setup of net-snmp is correct by querying
Wake On LAN by Broadcast first?
Hello, I was wondering if it would be possible to change the order that OpUtils 4 performs the WOL (or at least make it an option). Currently when I select a PC to perform WOL, I believe it sends a directed WOL packet first, which does not wake our PCs up, but when it's status becomes "attempting to power upby Broadcast" the PC will power on. (FYI I believe the "upby" may be a typo instead of "up by", but that's what it says). So instead of having to wait 2 minutes before it sends a broadcast WOL
Event Log Rules
Is it possible to monitor additional events logs such as the DFS Replication log on windows? Can I add it to the default_event_rules.xml file? cheers
Clear a trouble Alarm!
Hi all, I am trying OpManager, and having a problem with the Alarms and Notification: I had set up Notifications for all my alarms, and i have one alarm from a Cisco Catalyst 4500 about some Ports that are down, they are "operationally down", how can i make OpManager ignore this error? I have tryed to unmanage that ports, doesn't solve the problem! Preferely i just want to say: "ok, i know, if something else change notify me!", becouse those ports may be used in th future and i do not like the idea
What do these failures mean?
Hello, I used to get these alarm messages: Trouble feb 06,2006 12:39:02 PM AuthenticationFailure : Trouble feb 06,2006 12:39:02 PM AuthenticationFailure : Trouble feb 06,2006 11:39:02 AM AuthenticationFailure : Trouble feb 06,2006 11:39:01 AM AuthenticationFailure : Trouble feb 06,2006 11:17:29 AM AuthenticationFailure : Trouble feb 06,2006 11:15:50 AM AuthenticationFailure : null When i restarted the SNMP-service on the source of this alarm these messages where solved, but now i keep getting these
Server Availability Report:: 7 servers shown as Down
Hello there My Opmanager is ok , except that on the Report section--> All server availability report, among the 40 servers I have, 7 servers are shown with 0 percent uptime for today. i tried for the "past one week report", result is the same. but on the "last one month" report these servers are shown as 60 percent uptime. for the last 2 weeks, these servers are shown as down by the report . and yet , physically all these servers are own and working properly with out giving any trouble. I went thru
OpManager stops collecting data
Hi, I have installed OpManager 6 from scratch. Windows 2000, SQL 2000 OpManager collected data for the 2 or 3 hours then it stopped. Checked nmserrx.txt file and find out and error that the data was truncated. I modified database_params.conf, wrapper.conf and SetEnv.bat in the way Rex told me some time ago as database connection was getting disconnected and to get through this it was necessary to move to MSSQL JDBC Driver instead of jtds driver. Checked new nmserrx.txt file and found a new error:
alert when monitor is unable to retreive data
Is it possible to create a notification profile that will send an alert whenever a monitor is unable to retreive data from a device ? I'm using a Telnet monitor to check available disk space on a Solaris server & I want to get a notification in case the monitor is unable to execute the telnet command (in case login fails or no response from the telnet deamon)
Update status and Alarms
Hi, I am testing opmanager in my network, and having a trouble: I have set the refresh interval of all devices to 1 minute and when a simulate a link down i do not get an alarm until i manually update the status of the device in the "update status" action. What's wrong? Isn't the update automatic? And one more thing: What is the "Last Polled AT" and "Next Poll At" in a device? Because i always have a few days back, like for example today i have in a device: Last Polled at Out 26,2006 06:15:56 PM
Switch Port Mapper shows availible when it's not
It will show available in green, sometimes it will show a mac address sometimes it won't. But the available port count is always off. Transient ports do it as well, in the screen shot I attached there is 4 Transient ports that show in red and 1 in green, Available show 10, 4 in red and 6 in green.
Failed to create shared memory
When trying to start the OpsUtils, I receive the error message ' Failed to create shared memory'. Any idea what I must do to be able to start the service?
Failed to establish connection with web server. Gracefully..
Hi, I've search all posts about that subject and still have problems. 1st i've the mysql stop at the start and made copy of lib and no more msg of mysql and i startmysql.sh and that is ok. 2nd the Verifying connection with web server ... Failed to establish connection with web server. Gracefully shutting down OpManager. I change the ChangeWebServerPort.sh 8080 9000 and the problem still the same... i change for 8080, 9001, etc etc and still the same problem... i look at the logs and stilll can't
Can Not Delete Device
When I try to delete any device in OPmanager on Red Hat Enterprise 4.0 it display message : Status message Your delete request is being processed.Please check after sometime. But the device not get deleted. What cab be the problem & how can I delete it?
Receiving traps from a AR410 router
Every 4 hours is receive the following alarm from a Allied Telesyn Ar410 router: .1.3.6.1.4.1.9.2.9.3.1.1.1.1: 5, tcpConnState: 7, .1.3.6.1.4.1.9.2.6.1.1.5.172.16.188.8.23.172.16.188.28.4053: 544, .1.3.6.1.4.1.9.2.6.1.1.1.172.16.188.8.23.172.16.188.28.4053: 152, .1.3.6.1.4.1.9.2.6.1.1.2.172.16.188.8.23.172.16.188.28.4053: 5498, .1.3. It contains the address of the server where opmanager is running (172.16.188.28) and the address of the AR410 device: 172.16.188.8 It seems that contacting the router
Opmanager 6 on Debian mysql error
Hello I figure this must be a known or common problem. Im installing the above on Debian and when I run the start script ./StartOpManagerServer.sh, I get this error inside addon check Unable to start Mysql daemon Unable to create database Exiting OpManager This is similar to the thread in http://forums.manageengine.com/forumHome.do?forumGroupId=49000000002007&forumTopicId=49000002639827 I followed the suggestions in it and the end result was to contact support, no follow ups seen on this. I removed
Next Page