APPLNERR: Login Failure: for the agent
I try to integrate our Linux server via cli. The logfile says --> APPLNERR: Login Failure: for the agent but the credentials are correct. same error via ssh or telnet. Various tests are ok with putty from the OPS server. what can I do?
SNMP Monitor "test" fails
Hi, I am getting an error when I try to test a monitor that I created using a specific SNMP OID. The error message I get says "The Monitor did not respond to the test request". I can successfully query the SNMP agent on the device from the command line (snmpget) or through the MIB browser. Any ideas? (Screenshot attached) Steve
Clear alarms after service is up again!
When a service goes down, a alarm triggers just as i want to, but when the service is restarted and up again, the alarm that activates when the service goes down is still active! are there any rules on how i can fix this, when the service is restarted again i dont want the first alarm being active! Info Sep 16,2009 12:34:04 PM Windows NT Service EN BATCH is successfully restarted Service Down Sep 16,2009 12:34:02 PM Windows NT Service EN BATCH is Down here is a picture of it: <a href="http://sv.tinypic.com"
IBM xSeries servers Hardware monitoring.
Hi, I'm unable to monitor the hardware status of IBM x3650 series servers. I've enabled SNMP. Is there any additional service need to be installed for hardware monitoring.(like hp insight manager.). Does any one has the detailed steps. Thanks in advance, Arun
OpManager - Monitor Temprature of Non IBM, HP or Dell systems
Hi, i want to monitor Temprature of different systems which are NOT Dell, HP or IBM. as in monitors there are following under following sections but does not work and gives the error Dell PowerEdge Monitors Server Temperature SNMP HP Proliant Server Monitors Temperature SNMP Temperature Threshold SNMP IBM Blade Center Monitors Temperature SNMP But what if the
E-mail notification after "attention" alarm is clear
Hello. How can I set Op Manager to send me an e-mail notifications after the alarm of Attention severity has cleared? Now I get "clear" notifications only after a critical alarm will be cleared. Thank You for any help Kind regards Jacek
Can't start OpManager, License Dialog box appears
Hi After a server crash I am now unable to start the OPmanager server. WHen I start it it launches a licensee Details dialog box and wants a license file. When I point it to our current license file (which was working fine...) it says the file is invalid and I get and error code 501. I have tried to fix this by installing the latest service pack and hotfix but to no avail. Any idea? Thanks Dave
OpManager Service Frequently Stops Responding
Hi, We have had issues with a customer's standalone version of OpManager for over a year now, we hoped that by upgrading it to the latest version 8812 these problems would be resolved, but they still persist, the customer is aware of these problems and is not impressed by the reliability and stability of OpManager. The OpManager service frequently stops and therefore prevents device statistics from being gathered. Looking at the wrapper file, the following lines stand out as being part of the problem:-
How can I set negative threshold values when monitoring SNMP devices?
I have a need to monitor some microwave devices via SNMP. Some values (RSL, dB, etc) return negative values. When I set up my thresholds in OpManger, I receive an error that my threshold values must be positive. How can I monitor these devices?
SNMP extreme networks
Hi, I'm trying to configure snmp monitoring for extreme switches, but I'm having more problems with their mibs. Which are the correct mibs for extreme networks? I tried to import: extreme.mib v762b3.mib RMON2-MIB.mib RMON-MIB.mib can you help me? thanks in advance bye daniel
Enabling SSL in OpManager
Hi All Today I was going to enable SSL in OpManager but when I tried to download the ssl-enabled apache version from http://bonitas.adventnet.com/opmanager/12Sep2007/apache.zip I could not find anything to download... (error 404 page not found etc.) Have this package been moved from this URL? Where is it available for download? Thankyou G
OpManager - Alert Emails
Hi All, I am constantly getting alerts to say a certain device is down, I need to know when this type of device is down but I dont need OpManager to email me each time it misses a poll after Ive been notified that it is down. Is there a way to configure OpManager to send 1 email to notify me the device is down and then cease emailing me each missed poll thereafter? Thanks!
MySql DB Table Corruption
My system crashed last overnight. When I got it back up and running, I find that OpManager will not load. When I look in my Application Event Viewer I receive the following error: Event Type: Error Event Source: MySQL Event Category: None Event ID: 100 Date: 2/18/2010 Time: 11:34:44 AM User: N/A Computer: WLIBERTY-VLS3 Description: mysqld-nt: Table '.\opmanagerdb\polleddata' is marked as crashed and should be repaired For more information, see Help and Support Center at http://www.mysql.com.
Customize Alarm Message (eventlog rule)
Hi, Is it possible to customize the alarm message wich is displayed in the alarms list, when a event log rule is triggered? When I create a custom eventlog rule, the alarm 'Alarm=xxx Source=system Type=2 etc' is raised. Can I replace this part for a custom text? Regards Ralph
Problen with OpManager's notification profile passing agrument value to batch file.
My OpManager's notification profile was set to call my batch file everytime that the device send the SNMP trap to OpManager. But some agrument value such as $IntfField(ifName) did not pass through my batch file. Do you have any advice ? test.bat ----------- @Echo off echo %1 - %2 Down > C: est est.txt test.txt (output from notification profile call test.bat) -------------------------------------------------------------------------- "Oct 06, 2011 02:28:07 PM" - "$IntfField(ifName)" Down
Help with Juniper EX
I'm preparing to monitor our Juniper switches via OpManager and after reading the posts for Juniper i'm still a little confused on what to do. I know I have to place the mibs in the correct dir on the opmanager server and I have a way to import the mibs into an snmp walker so that is not the issue. I downloaded the mibs from Juniper but they're in txt file format, not mib. Do I need to convert them to mib or cfg files? If so, how? And what mibs so I need? I want to start off with basic stuff
OpManager product presentation
Hi! I wonder if there is any ppt of opmanager? I found this but it´s a year old, otherwise it´s very good, i just wonder if there´s any newer version? https://forums.manageengine.com/ # topic/49000004308284 Thanks Erik T Channel Manager Inuit, Sweden
Threshold Notification Question
Good morning! OpManager is a little new for me as I started a new job and OpManager has been placed in my lap. I do not know a lot about the system and am learning on the job. The previous person who was handling this also seems to have made a bit of a mess of things, which I am trying to clean up. Right now, every server is monitored for CPU, Memory and Partition Sizes. Depending on the function of the servers, more items are monitored but that is our bare minimum. Recently, we modified
Trap issue agent-addr header
Opmanager filter trap snmp bases on agent-addr header in the PDU instead of real sender IP. This is real problem for most snmp agent because agent-addr is the first active interface. DUMP 10:20:58.356873 IP 10.10.4.10.55184 > Opmanager.162: C=agilan Trap(502) E:6876.4.3 195.238.251.2 enterpriseSpecific s=203 213976554 [|snmp] ANOTHER ONE 18:12:00.165411 IP 10.10.1.210.46585 > Opmanager.162: Trap(91) E:2190 1.0.0.127 enterpriseSpecific s=3 0 E:2190.100.5[|snmp] net-snmp In the trap message send
Hp-UX 11.31 and 11.23 memory problem
after install opmanager version 8.22 i can collect data via cli cerdential for CPU and DISK from the Hp-UX 11.23 and 11.31 but when try to test memory i get all the time zero. please advice
Opmanager plug-ins
what are the requirements for installing both netflow and NCM plug-ins ? I am planning to upgrade my Opmanager to service pack 8810 and hotfix 8812 before installing the plug-ins. Do I have to pay for both plug-ins ?
Is this possible in IPAM ?
Hi guys, Regarding IPAM section again, in the Search Field, by default we have search options based on IP addresses, MAC, Alias, Location etc. I want to know if is possible to add other queries based on Subnet Name, Vlan Name? These fields comes by default during the creation of new subnets. thanks, Toni
Monitoring a Windows Service, which is set to restart every 1 min (Biztalk Host) - Suggestion, Threshold options for Win Service
This weekend, we had a SQL server instance with some network problems. I received countless email notifications that the Biztalk Group services on the Biztalk server were down followed by a clear message 1 min later, and then another down notification. The Biztalk services by necessity are configured to reconnect to the SQL server, should there be a disruption, every 1 minute. The notifications were valid, but I'm wondering if there is some means to modify this parituclar windows service, in
opmanager login keeps prompting "Please enter the user name" even though credentials are correct
we are using Opmanager 8 and when logging in with the correct credentials remotely (from a pc) the login page continues to prompt the user to "Please enter the user name", any ideas?
How to configure a windows server 2008 (RODC) with WMI and OpManager?
Hi, i would like to monitor several RODC with wmi. I have made some configuration as: AD Create a group "G" Create a user "U" Grant access "U" to group "G" Grant access "G" to domain group Distributed COM Users Grant access "G" to domain group Performed Log Users GPO Grant access "G" to: Act as a part of the operating system Logon as a batch job Logon as a service Replace a process level token WMI Control Set permissions "G" to => Execute Methods | Enable Account | Remote Enable | Read Security
Two questions regarding IPAM
Hi guys, Good job with this software, appreciate it. I work as an IT network in one ISP. Before a couple of days we installed OpUtils 6, trial version. For our team, most important feature of this software is IPAM. So I have some questions. 1. Is there any way to have only IPAM software, 100% pure, without other net tools? 2. When we tried to add new column ( VLAN id) at IPAM/Custom Column we failed in "SUBNET Level". The new column doesn't appear in subnet table. The same thing we done using the
limit switch interfaces to physical interfaces / no VLAN´s
Hi, i check the OpUtils for our company. (evaluation) If i add a new switch (cisco) the switch is scanned and all interfaces are displayed. But all VLAN´s are displayed as interface. Where i can switch off the "VLAN interfaces" or limit the analysis to physical interfaces ? regards Stefan
OpUtils problem
When i try to approve a subnet in ip address manager it throws this message: Column index out of bounds. Index: 16, Column count: 15. Table: SubNetwork How can i repair this thing?
If an Utilization of the Monitor is Critical/Attention, how to execute action until the Monitor is in clear status?
Dear All, If an Utilization of the Monitor (CPU, MEM, DISK Utilization) is Critical/Attention, How to execute action(E-Mail, Run Program etc.) unitl the Monitor is in clear status? Thank you in advance.
False monitoring values caused a server crash
Hi, I'm monitoring the free disc space in GB on a Windows 2003 Server using WMI (standard monitors). There are two drives which return values with 4GB (C:) and 32GB (D:). The OpManager table says that the disc space of both drives didn't change the last weeks. They always had the same value. Drive C: should have the value of 5GB. The last weekend drive D: went to the size of 0 Bytes. OpManager didn't monitor this and kept on showing the value of 32GB (until today). I've tested this special monitor
Discovery Network
Hello, I´m running ManageEngine on a Windows environment. I want to discover my network, when I fill in the Ip addresses range I get an "Please enter a valid number" error. I´m using a vaild IP for the network as well as a correct Mask
configuration
how to set disksapace alarms in op manager?
Web, DNS services are down. OpManager
This alarm keeps showing up but it is false. There is no web service on the server and DNS is working fine. For the life of me I can't find this alert to either edit it or turn it off.
The selected Service pack does not contain mandatory upgrade
Hi, i have just download and installed Opmanager EE 8810. I'm trying to upgrade to the latest hotfix 8812 but i receive this message back: "The selected Service pack does not contain mandatory upgrade" And nothing happens. Please advise
Firewall Ports and availability
What are the specific default ports that should be open for a server for to be monitored by OPManager? Is it possible to also check the availability of a server via SNMP only, meaning we will not be able to ping the server? Thanks
switch ports
what is the difference between a port being yellow or orange because all of the tests ran were 0.0
connector opstor -> opmanager
Is there any plan to inplement a connector opstor -> opmanager ? like the on created for application manager? The aim for several companies is to have �one� gui for al monitored device. :?:
Hardware monitoring
Hi, I'm looking around regarding the scope of monitoring hardware failures using opmanager. Could someone provide me with some inputs or links which I can refer to. Thanks, Melvin
Sharp MX Printers
We have a number of Sharp MX printers and they go offline at randem. Has any one had any luck monotoring Sharp printers? Sharp MX-M503N guy
Migrate Database from MYSQL to MSSQL
I would like to move my OpManager database from MYSQL to SqlServer. Is there a documented (and supported) method to do this? Thanks, --rob
Next Page