OPmanager supporting VMWare monitoring via vCenter
Hello, When do you plan to release OPManger in order to support monitoring via vCenter? We are wainting on this new release as we must disable lockdown in our ESX farm. If we will not get it, Security will request to disable OPManager. Many thank for your quick answer. Regards Philippe
[Feature request] Repeat notifications for unacknowledged alarms
I need a feature that will send email notifications every N (minutes/hours) until the alarm is acknowledged or cleared. My issue is that during unscheduled downtime, I receive so many notificatons from Opmanager that I usually miss one or two that does not say "Clear". This is usually for a single process or service, so it's easy to miss until users start complaining. I also have a few alarms that are acknowledged but not cleared, so I'd like to set up a separate schedule as a reminder if an acknowledged
Report memory and CPU
I'm using 99% of memory on my server. I would like to take a report to know that consuming more memory, it is possible? I want to know which application is consuming more memory. And to CPU also.
How to remove HyperV VM?
According to the documentation I should see a remove/delete action in the VM Snapshot page. I do not... How do I remove these "orphaned" machines? They were deleted/removed from the host server. Screenshot here https://skydrive.live.com/?cid=40421afb471988d1&id=40421AFB471988D1%21112&sff=1&authkey=!AJ9jFYwUL_79Nzw Running lastest build of OpMan Windows Server 2008 HyperV Server Thanks, Rob
Ignore individual alarms directly from the Alarms tab
When I turned on my Event Log notifications, I started recieving hundreds of random, non-important events (like printers disconnected or domain voting). So I started adding these events manually to your Event Log Rules and set them to "ignore". However, the amount of steps that are required to add 1 single event to "ignore" is unneccessarily complicated. I need to go to the server, find the event, get the event ID, warning level, type, and message, then create a new Rule and set it to "Ignore". Suggestion:
Need Assistance Adding Seed Core Device for Maps
Hello-- This is going to sound like a lame question, but I'm looking over the instructions for configuring a network topology map and I can't get past the 2nd step. Here are the instructions: From the OpManager dashboard, select Maps --> Network Maps link (mouse-over the Maps tab to see the links to all the maps). In the Networks Map, select Actions --> Settings menu to your right. You will find a combo-box to select the seed device. Select the core switch from the list. Select the topology layout
Anyone able to monitor their rds web access url?
I can't seem to make it work. Always says the url is down. I tried credentials. Thanks
Opmanager starts but corrupts database, please help!
Hello! Recently I installed a fresh install of Opmanager 8 and updated it to v.8812. I added many devices and created maps, but after Windows Server 2008 updated a few things it restarted and Opmanager went haywire! It starts as a service, in web interface I get "Initializing Modules..." for a minute or so, and then a login screen appears. When I try to log in with correct credentials I get "Oops looks like a few tables got corrupted. Don't worry.. Run RepairDB.bat from bin directory and restart
Eventlog error exclude
Hello, I want to not see an warning and error from the event log, i have addes an rule to auto clear the alarms, but i think i am doing something wrong. I added the following, i added a new Rule: Rule Name : Perflib aspperf.dll Event ID : 2003 Source : Perflib Category : None User : Event Type: Error and warning enabled Description contains string : If incoming event matches criteria, alert with severity as, Clear the event --------------------------- After some time the error come back. This is
How to restrict or remove information from user's dashboard and Overview
We recently created a end user from admin account. We created the business view for this user and added only 1 device to this view, then linked to that user ("Only the selected Business Views" was selected) The problem at the moment is, the admin have plenty devices and lots of different network traffic monitoring graphic (widget) on the Overview page. Both admin and end user goes to "Overview" as default Home page after login, and both of them got those monitoring graphic (widget) showing there.
New Netbackup 7.1.0.3 installation : service is displayed down, but sevices is really running
Hi everybody, Since 1 month now we are updating our Symantec NetBackup Agent from v.6.5.3 to v7.1.0.3. And now ON EVERY UPDATED SERVERS netbackup client service is displayed down but service is running !!! when i choose to add a monitored service the service is shown in "green" and since i add this monitor to the server, after a while it raised an alarm for "windows service down" some informations : OpManager version 9011 (waiting the new AMS license to update to the last version) Does someone experience
Alarm widget size
Hi We have resently added Event log monitoring and the All alarms widget is now showing warnings for the event logs. My issue is now that the All alarms widget has expandet it's size on the monitoring homepage and are showing alot of text from the alarms. Is it posible to minimize the amount of alarm message text shown in the All alarms widget?
Removing Dashboards
Hi! Is it possible to remove some of the standard dashboards? I've even tried to like name my dashboards with a catalouge structure like: 1. Structure Map 2. Temprature Graphs 3. Temprature Instant But the problem here is dashboards like: WOIP Overview WAN RTT Overview Split up and make it really messy. Is it possible to deactivate or delete em? I got no WOIP or WAN stuff to control..
Having trouble with MIB on Centos 6
Guys, I am new to Linux and opmanager. My opmanager server is Windows 2008 server i am trying to monitor CPU/Disk utilization on Centos 6 server. I have snmpd service running on linux server. When i run "test monitor" on CPU utilization The Monitor did not respond to the test request 1. Check if SNMP is enabled on this device. 2. The SNMP request might have timed out 3. The OID may not have been implemented in the MIB. 4. The device might be down Any help would be appreciated. thanks.
SQL 2005 monitors not working after SP4
Hello, we have two servers with Microsoft SQL server 2005 STD, we had configured a few SQL monitors and was working propertly, but after aplying SP4 to SQL, the SQL monitors stop responding and the data for this monitors are N/A. I have already try the following: - To rediscover server - Delete server and add again (the new server is not automaticaly detected as SQL and therefore doesnt add automaticaly the SQL monitors), add manualy the SQL monitors - WMI credentials are tested, Monitors-->Performance
Merge Device Monitors
Im trying to figure out if there is a way to merge devices, or at least an easy way to copy the monitors from one device to another. Currently we have a lot of our servers added manually. I am now going through and adding the ESX Hosts so that all the VM's come over automatically. The problem is the servers have all the notifications tied to them and i want to move these monitors to the virtual device instance. Its very time consuming to move them over manually and am looking to either merge the
Region based dynamic mapping
Hello Folks i wonder can anyone fully utilizing this feature in opmanager ? After discovering devices in opmanager we want to bring devices (servers , switches , APs) on the subnet based maps. Currently opmanager has only layer 2 mapping but some problems . also dont brings the servers , aps , terminals. i attached the whats up screenshot of layer 2 mapping . Will there be any feature on the way similar to whats up ? Any development on this issue? Thanks. Ozmert
opmanager mail notification
Hi i have configured opmanager 9 in my organization, Im facing some problem in mail server setting , i want to add my gmail account in that, could any one help how to do the setting.. Regards, Velu M
download opmanager.truststore IE
I use OpManager Enterprise 9410. I just realized, that the download og the truststore file unter Admin - Probes is not possible in IE. It works with Firefox. Does anybody have a solution for that? How can I download the truststore file in Internet Explorer? Thanks jobu74
rename probe / Reregister probe
I would like to rename a opmanager probe. Is there a way to do this whitout reinstalling the probe? Is there also a way to rregister a probe, if it was deleted on the central Server without reinstalling the probe? best regards jobu74
Problem OPmanger Authentication
Dears I have a problem in OPmanger that i can't login through webpage anymore it prompt the username and password page , when i tries to login it just hang , plus i got no report through mail since the problem which mean the services is not running any more, i restarted the server many times and the problem still exist.
Interfaces on maps
It would be very useful to add interfaces on maps (not just devices).
Hyper V Host detect as server category
Hi, I manually add my Hyper V Host by using IP address into Opmanage but it category it as server. How can i change this? i try remove/delete from Server Category but still back to server category when add in Add HyperV Host.
SSL Integration is Poor
SSL integration between OpManager products is weak. When will you be rolling out a means by which we can merely apply our existing certifications to the products without having to download third-party apps to do so?
Copy 'admin' User Environment/Profile
I have configured the OpManager environment for the default local 'admin' user. This configuration includes the creation of a custom dashboard that I want to use as the default for the admin staff. I now want to 'copy' this environment/profile to Windows Domain administrators, but have not located a simple way of accomplishing this.
OPmanger Stop responding
Dears i've an issue with Opmanger , t stoped responding , it prompet the username and password webpage and whenm i try to login it just don't respond and hang , it also stopped sending Emails to me since this problem occured .
How to rename site in Opmamage DE certal server
Hi, We have created a name for site, we want to change the name, But we don't delete site and reinstall probe server. How to rename site ? Thanks! Caijun
Remove exchange
Hi, Added a server as exchange, so we now want to take it as exchage, how do I take that monitors exchange server? Tiago Toledo - Bigode Blog: http://www.pastelariadigital.com.br
How do you determine the monitoring interval of a Hyper-V server?
There is no polling or monitoring interval settings like there is on a standard server. How do you see the interval and modify it if needed?
Can someone please explain to me why and when I would use an agent on server?
The only thing I can notice about its usefulness is when the server gets rebooted I get an immediate notification. Are there any other benefits to using the agent?
Windows Server 2012 Hyper V
Hi, I have two server with 2012 STD 64bits. Both install hyper-v manager and both have 1 virtual machine. The problem i facing is when i add in the Host A, it only capture 1 virtual and 1 replica virtual. While in Host B, it does not show any virtual machine. Both virtual machine and replica virtual machine using same IP address. Host A Host B Virtual Machine A - power on Virtual
OpManager reopening closed SD+ tickets
Hi Why does OpManager reopen old and closed SD+ tickets when an alarm triggers a "Log at Ticket" notification profile? Example: A month ago a disk freespace alarm was triggered and a new ticket/request was generated in SD+. This issue was then resolved and the request was auto-closed. Then today the same treshold is broken and what happens. OpManager reopens the old request and changes (not appends) the original ticket description. This ticket then, as it's a month old goes directly into breach
Ubiquiti AirOS mib
hello, I'm having trouble finding the MIBs for the device Ubiquiti Airos any tips on where to find?
PROBLENS IN CLI - VERSION 9410
Dear good day. I can not add monitors processes in linux, credentials pass, but when trying to add the process to zip up screen. version 9410
question for opmanager 94500 version.
q1: how to change opmanager's max memory? use ChangeMemorySize.bat? i don't know how to use it. q2: if i want to change opmanager msssql2008R2 DB name and sa account pass , what should i do ? q3: how can opmanager to monitor single cpu core 's usage ? like cpu3 q4: how can opmanager to monitor windows service , like File Resource Manager when it used cpu or memory resource > 90% then alert? usually the service is working , but used resource too high~ so i want to monitor this.
Notification method other than Email or SMS
Hi, Email is not a preferred option for the delivery of notifications in my environment. I'd like to create an XML file instead for each notification raised. I'm guessing that the Alarm Notification could be a script of some sort. Has someone already come across a similar and what would be the best approach to take ?
No backup?
How is it that this product does not offer any back up solution other than the batch files included in the bin folder? How hard wold it be to take the code from service desk plus and make a real functioning backup job in the UI? come on guys... Here comes "its on the road map"..... yea I hear that about everything here... sick of it really.
CCTV View auto login after 9410 upgrade
Upgrade went great, we added domain, enabled domain users, and are able to logon with domain credentials just fine.. We have several CCTVs that autologon Using format below. Since enabling domain authentication, autologin does not work. http://opmanager.server/customDashboard.do?methodCall=showCCTVDashboard&cctvID=2&firstTime=true&reqUserName=username&reqPassword=password What additional line argument do i need to login with domain credentials or local credentials Opened a support Request
Unmanager services
Dear goodnight. Is there any way to just let the alarm unmanager. Example: in case of server maintenance process or service be alerted unmanager this period, instead of the entire server. It would be important for the generation of indicators, which could make it show only the service in maintenance than the entire server. Thank you.
Auto or scheduled discovery
Hi there, We are using latest OpManager build 9410 but I can’t seem to find an option for auto discovery of devices. OpManager monitors, among other things, our workstations and we have changes on the network where PCs get added or removed. Is there any option that would allow us to have new PCs on the network automatically added to the OpManager under the Workstations template? Or any option we could schedule a periodical discovery on our Workstations subnet? Thanks, Nick.
Next Page