Event log problems.
I am reciving event log from one of the probes, this probe are located on the same Nettwork as the Central server. But the other probe that comunicates with sentral server over the internet I can't recive any event log's? WMI are functioning (Windows Services and Exchange). Are there some simple explanation for this ? For testing purpose I activate a new Probe at my House and configuret it to retrive Event logs from my server, but no luck. I can WMI Services / Exchange but Event log does not function.
Business View For URL`s
Hi, Can you advise, is it possible to have the URL`s we monitor, in a business view. The reason we requre this is so if a User that does not have admin rights logs into OPmanager they can see the URL status. At present i dont belive you can assign them access to URL`s only business views. thanks
Starting with a clean slate
Hi Guys, I have opmanager installed and i'd like to dump all the info and start from scratch without having to do a clean install again, is there some way i can dump all the info collected in opanager and start over again..
Why I can't find installMySQL.sh?
I try to install Opmanager on Linux. But I can't find installMySQL.sh which are mentioned in Install Guide of Opmanager and MySql can't start. Where is this shell script? or I need to install Mysql before I install Opmanager?
Alarms Graph
OpManager can not show Alarms Graph on Home page, I was installed OpManager with evaluated licensed on Fedora Core 5, All process done but it can not show alarms graph.
OpManager Service Monitoring
Good morning, I have added 2 new service monitors which I have defined. In fact, I would like to monitor the port 161 and 162 (snmp and snmptrap) in order to see how reacts my monitoring server. I did it but the services are both showing N/A. When I do a netstat -na, I can see this ports open. Why the response times are not available?? Has anyone an idea about this problem? Thank you very much Regards, Loic
Probe crashes
Hi 2 of our 5 probes are crashing evry hour on the hour. What I can find out is that the probe shuts down becouse a connection to the web server can't be made. And the webserver shuts down becouse a it get a term signal from the probe right after the probe not being able to connect to the webserver. wrapper log: ------------------ INFO | jvm 1 | 2006/08/23 07:01:54 | INFO | jvm 1 | 2006/08/23 07:01:54 | Failed to establish connection with web server. Gracefully shutting down OpManager. INFO | jvm
Hotfix for OpManager 6
Hi All, We have released the Hotfix for OpManager 6 and it is available in this link. http://manageengine.adventnet.com/products/opmanager/29809517/AdventNet_ManageEngine_OpManager_6_0_SP-0_2_0.ppm Please follow the steps in this link to apply the hotfix. http://manageengine.adventnet.com/products/opmanager/service-packs.html Issues Addressed: a) False alarms for Printer issue is fixed. b) ServiceDesk menu is added in device snapshot of DomainController. c) Process diagnostics option is included
URL monitoring?
URL monitoring? Have added various URL to be monitored both internal and external sites and one site keeps responding as down but when you click on the link in OpManager it takes you to the site and it is up? Have tried clearing the alarm but still comes back? Any help or reason out there? thanks
IO disks monitoring with OpManager
hello everybody, I would like to monitor my I/O disks on my windows and linux systems. Concerning linux, there is a mib (ucdiodisk) with metrics like ssIOSent, ssIOReceive, ssIORawSent,ssIORawReceived which can send me back a value. But for windows, I'm unable to find how to monitor them...My servers are Compaq Proliant and OpManager proposes out-of-the-box oid like SCSI High Read Sectors for example. But this doesn't work and the monitoring of the IO is very important for us... Is anyone able to
Opmanager MySQL Documentation
Is there any documentation that explains the list of tables and the data that is stored in them? I working on creating a interactive php application for group of devices and I need to know where the data I need is stored. Thank you for your help. Mike
adding devices (router & Switch)
When trying to add a subject devices, nothing happens. could someone provided me with some hints of how to add a router o switchs. thanks in advanced
Custom Monitors - Testing Failed
Hi, I'm relatively new to OpManager and have been trying to add a custom monitor that uses a WMI visual basic script to monitor whether a server is attached to its cluster. I have followed multiple guidelines found on these forums until i have: 1. Copied the Script to the correct Folder (I have tested the code in cmd and it works fine) 2. Edited the 2 necessary .xml files 3. Added the monitor to a test server The test server isn't load balanced so the usual script will not work, however i have created
Running program does not work
Hi i am trying to launch vbs when there is an alarm I don't know how to set it. It is saved to directory on server running OP Heeeeeelp :roll:
New Feature Request
It would be very helpful if there was a way to view who is logged onto opmanager at a gven time. Just so if there is matinace require on the OPmanger database, we could see the users, either username or ip address and notify them only.
is it possible to write text on displayed graphs?
Hello everybody, I am monitoring my file systems but the fact is that I have too many and in OpManager, the graphs are displayed but their name are not shown. We can see only the oid : .0, .1, .5, .11 which is not very clear. I would like to write manually the name of the file system above each graphs... Is it possible? Thank you! Best Regards, J.
Backplane utilization not showing up
I've got a few Catalyst 65xx and 55xx series switches in my environment and I'd like to get the backplane utilization out of it. I've setup OpManager 5.5 on a box and sucessfully added the device but the % backplane and CPU utilization don't show up, but the memory utilization does. Any ideas on how I can get it running? Thanks.
event history size
Hi, The event history is limited to 1000 rows. My router only sends snmp traps about the connections. It would be cool if I could somehow do the following: 1) increase the # of rows to 5000 2) have an sql statement to pull out the data so a log processor can scan for idr I think the file is DBObjects.conf in the conf directory. I increased everything from 1000 to 5000. But this didn't work. I must be missing another config file. Any ideas of which one it could be?
Problem with Device
Hello ! We are currently testing a free version of OpManager (Build number 6003) in your School to supervise our network. Test is done with a Windows 2003 Server, a management station with XP Pro, a 3Com SuperStack3 4226T Switch and a Cisco Catalyst 2950 Switch. But I have a problem when I add a device in the Admin page. I can add the device but I don't see the device when I click on his snapshot in the Home page. I saw that the device is listed in the "All devices Inventory Report" but not in the
URL Monitoring
Hi! I've noticed that OpManager sends Email Warnings for URL Monitoring with a different sender address. (noreply@adventnet.com) All my normal warnings have the sender address I have defined in the Email Profile. (monitor@bla.com) How can I configure OpManager that it uses always the same sender address? Regards, AF.
Bug in MSP Edition
Hi, I'm curently changing the conf files to support MGE UPS. It works fine but an bug or design error causes problems. when i add vendor spesific monitors I add the following configuration <DEFAULTGRAPH Name="UPSOutputVoltage"> <YAXISTEXT>VAC</YAXISTEXT> <DISPLAYNAME>UPS Output Voltage</DISPLAYNAME> <name>UPSOutputVoltage</name> <Vendor>SNMP</Vendor> <Monitor>Vendor Specific</Monitor> <Description>The output voltage of the UPS system in VAC</Description> <oid>.1.3.6.1.4.1.705.1.7.2.1.2.1</oid> <type>node</type>
Probe down not showing in the customer dashboard (MSP)
I wonder if it is a feature, or just a bug I had problem with communication with one probe. The alarm was detected and generated with category "probe". The problem is that this alarm was among other alarms. Since thre was no other alarm for that specfic probe, the first look at the dashboard (on the home page) was showing no error and it apperead as if everything was OK Suggestion 1 : add a column or some error indication in the dashboard to show probe status. Maybe mark the whole line as greyed
URL-check from external site with Proxy authentication
Is it possible to check our external site in OP with MS ISA-server with authentication? I searched for an URL to login automatic. Something like http://proxy:8080/user=xxx/password=xxx:http://www.externalsite.nl but i can;t find anything
OpManager Service Discovery
Hi all, I have a question concerning the service discovery. All the services that I checked in the "Service Monitor" section were discovered automatically when I added a device. I have added a new service (citrix) and I would like it to be discovered on my old devices already added since a long time. I was thinking that doing "Rediscover now" on the device will discover new services but this is actually not the case. But I have too much devices and I would like to find a way to discover these new
ORACLE SNMP
I am trying to configure SNMP ir order to monitor Tablespace Used, I have configured everything in Windows SNMP & Oracle Intelligent Agent, as it is in the documentation, but when I test the monitor always appears: Test results The Monitor did not respond to the test request Summary Device Name sve001001-202.la-seguridad.com Monitor Name OraDbTablespaceSizeUsed Protocol SNMP OID .1.3.6.1.4.1.111.4.1.2.1.4 Possible reasons 1. Check if SNMP is enabled on this device. 2. The SNMP request might have
Hotfix 6005 is available
Hi All, Latest hotfix 6005 is now available for download. Here is the link. http://manageengine.adventnet.com/products/opmanager/29809517/ManageEngine_OpManager_6_0_Hotfix5.ppm Please follow the steps in this link to apply the hotfix. http://manageengine.adventnet.com/products/opmanager/service-packs.html Highlights of this release: * "NA" in Interface Availability Report has been fixed. * Issue in associating a monitor to devices through quick configuration wizard has been fixed. * Issue while deleting
Wrong status on custom map
Hi, I've got some business views linked together with shortcuts. Some of these shortcuts are showing up as red despite everything in the targetted business view being green. Whats wrong?
Funkyness after 1 week (Error!)
I can not go into some of the monitor configurations (resource monitors, traffic monitors, etc) and when I try it comes to a super simple "Error!" page. I have tried the repairdb.bat utility with no real luck. What is going on with OpManager?
HP JetDirect
Anyone having success monitoring HP JetDirect connected devices? I am trying to monitor HP DesignJet plotters with the jetdirect card and the printers show up as desktop devices with no option to move them to the "printers" group. I can; however, monitor these devices using snmp and the HP Web Jet Admin tool. Any suggestions would be greatly helpful.
MySQL Database error
Syntax error or access violation, message from server: "You have an error in your SQL syntax. Check the manual that corresponds to your MySQL server version for the right syntax to use near 's_URL_Poll') ORDER BY Alert.MODTIME DESC' at line 1"; nested exception is: java.sql.SQLException: Syntax error or access violation, message from server: "You have an error in your SQL syntax. Check the manual that corresponds to your MySQL server version for the right syntax to use near 's_URL_Poll') ORDER BY
Bizarre problem
I have installed Opmanager at two separate client locations and as of Tuesday evening they both have started acting weird. One simply doesn't show the server info on the front page anymore. Not that big of deal since everything else seems to be functioning properly. Also we are unable to run any reports from this server, "No Data Available". The other one is by far more troublesome. It is currently monitoring 13 servers (windows, mac, sun, & novell) and as of 1900 hours Tuesday none of the data is
Monitoring SQL with Named Pipes instead of 1433?
I need to monitor a server that does not have TCP/IP enabled for SQL and I cannot enable it. Is it possible to monitor SQL functions through Named Pipes instead of TCP port 1433? Thank you. -Eric.
Trap (Unable to receive any trap)
I am unable to receive any trap with OpManager. I've written a trap generator and all my MIBs files have been verified by OpManager. I've also set up a trap processor by following the instructions, but there is still no trap received even in the unsolicited trap view. The traps generated by the generator can be received by the SNMPUTIL.exe from the Windows Resource Kit and the other application. It will be much appreciated if anyone could tell me how I can get it work.
Discover network the first time, then stop
I have a network (39 nodes) I want the probe to discover. SOme are DHCP, some are Fixed IP. I want to let the Probe discover the network. Once that is done, I would like it to stop the autodiscovery, and I would delete the nodes I dont want to monitor. I looked in previous post, and it is not quite clear to me how it is applicable in a MSP version. What in the seed.file of the central I need to modify? what in the probe seed.file ? I also noticed that DHCP Discovery is set to false . DOes it mean
Rearranging Business views
How do you rearrange the business view order on the left side of the screen in OpManager. I know it lists them in the order they were created but is there a way to go back and rearrange them afterward? I have 60 business views and I need the more important ones at the top of the list. Thanks!
"ignore the event" in OpManager Monitors Eventlog
What I want is to use a "Description string",- to identify any/all event type,- that contains string,- for example: "has started",- and then IGNORE THE EVENT. It does not work. It must work for ANY and ALL: - Event ID - Source - Category - User And ALL Event Types Therefore I type nothing in: - Event ID - Source - Category - User And I select ALL Event Types And (for example) I type "has started" in Description contains string. And I select: " Or, ignore the event" However I still get Critical alarms
MySQL db error - SQLException while getting database connect
I tried to move the Opmanager to use an external pre-existing MySQL db. I edited the database_params.conf and get this error: inside addon check SQLException while getting database connection. Check if database daemon is running java.sql.SQLException: Server configuration denies access to data source at com.mysql.jdbc.MysqlIO.doHandshake(MysqlIO.java:519) at com.mysql.jdbc.Connection.createNewIO(Connection.java:1731) at com.mysql.jdbc.Connection.<init>(Connection.java:559) at com.mysql.jdbc.NonRegisteringDriver.connect(NonRegisteringDriver.java:358)
New Feature request - Change to Alarm escalations
Can you please make it so alarm escalations can be by device as well as by category? Also make it so we get a device name as well as IP. Right now if I have more than 1 device in a router category down I only get one email listing all the affected devices by IP address. I was able to get a OpManager to show the device name in the subject using $displayName but that is only good if only one device is down at a time. Thanks!
OpManager & ServiceDesk Integration
Hello. I'm running a fresh install of ServiceDesk v5501 and an upgraded install OpManager v6005 and I'm having a difficult time trying to get OpManager to open a ticket for a device that is not responding. I have followed the easy setup instructions, but it is just not working. Any ideas or is this an open issue?
Specific alarm isnt critical
Hello, how can i manage opmanager to say that a specific alarm isnt critical? he sends me a critical alarm and i KNOW its not critical other alarms should be unaffected from this "rule"? he sends me following Category : Server Severity : Critical ---------------------------------------------------------------------------------------------- Source Modified Time Message ---------------------------------------------------------------------------------------------- nav.intra.company.deAug, 10, 2006 08:59:54
Next Page