How is MSSQL performance vs MySQL
I'm just now setting up the first couple of dozen devices in demo mode and I must say performance is SLOW. The dedicated server that opmanger is running on doesn't show any significat (<10% ) CPU utilization or spikes and has plenty of available memory. I'm wondering if switching from MySQL to MSSQL will significantly improve performance?
doubt
Tell me on which technology/ platform used for opmanager
Monitoring and Notification Profile Issue
Dear Support, I have just reinstalled v7 and applied v6 license file. Build 7004. Below are 2 problems encountered. 1. Switchport notification. I wanted to be alerted only when vlan interfaces are having problem. I tried to deselect all ports and select on specific ports in the notification profile criteria. After saving, I discover that all the ports are automicatically checked again. I am not able to select and save specific ports in the notification profile assigned. 2. The functions of custom,
Service monitoring options
What are the options for monitoring a non-microsoft service? I understand that you can use WMI to monitor Microsoft services, and you can monitor services that listen on a particular TCP port. Is it possible to monitor a 3rd party service that doesn't listen on a TCP port? A customer of ours has some services running on their servers that they would like to monitor so they know when the services go down. What are my options for this? Thanks.
Fix for Interfaces not showing up
I installed the latest patch for OpManager 7.0, however I noticed the Interfaces for all devices are not still not showing up. Do you know when this is issue is going to be fixed?
syslog in op7
Hi, Just one simple question. I'm using the WMI to collect information in my servers, but I have some other devices that are only able to use syslog messages. Is there a way, some add on, plug-in to include the syslog server to my OPM7? That would centralized my network monitoring
Interface description lengths
Hi, could someone please tell me how to adjust the displayed length of an interface in opmanager 7? having a list of switchport interfaces, **ALL** called "GigabitEther..." is insanely annoying and frsutrating... yet there appears to be no fix in any part of the (so called) admin section. Thanks Chris
Disabled or Operational Down identification problem
I'm trialing the OpManager v7 and I found many problems in it. The biggest problem of all is, it is unable to identify whether is interface(i.e. switch port) is disabled or disconnected. Is there anyway to tweak OpManager so it can identify it more clearly?
Adding Cisco 871W routers in v7
Hi, I modified the Cisco 800 Device Template to include the device OID for a Cisco 871W. I then added one of these to OpManager, which appeared successfully - it's listed in the Router category. However, whenever I try to view the device itself, I get the following error: Status Message Unable to fetch Managed Object details for the object : xxxxxxxxx-yy-zzz.loopbacks.aaa.bbbb.cccccc.dataline.co.uk [I've obfuscated parts of the name, but it's the same length as the original] I added the device by
All devices and view has disappeared!
After coming in the next morning, When I select switches from the main window, I get the error: No Infra Structure View found with this name. Why might this be happening and how do I get all of my switches, alerts, and reports back?
Schedule at-a-glance reports
Hi all, I'd love to be able to schedule the at-a-glance reports to be delivered by email in v7. Can it be done? thanks, alec
Services and processes
Hi, We are trying to evaluate ur product for our MSP. I installed 1 probe and opmanager MSP adition 6004. I have added a windows service to monitor. I have also configured the snmp service to send trap to probe. But I am not getting any trap or Alarm in the Opmanager when I stop the service. Similarly I wanted to know is it possible to do monitor a process in Linux or Unix systems? Can we get a trap? Where can I see the snmp traps coming to opmanger?? Regards YAsh
snmp traps
Hi, I hav opmanager 7 . installed. I wanted to know how to check the snmp traps that I have received @ probe. Regards YAsh
Monitoring Dell Server
I would like to monitor our Dell Poweredge servers. I have downloaded the MIBs from Dell's site however I am getting an error when attempting to load up the 10892.mib file in the mib browser. It comes up with an error about a scripting problem and doesn't display any values. I have tried to upload a different version of the file but it fails. I also would like to know whether it is possible to monitor a device for a particular value. When it displays a value other than the OK value (ie a value other
MSSQL Monitors (WMI Based)
I am using opmanager 6 and trying to set up monitoring for sql server. When I select MSSQL Monitors (WMI Based) I get a page with SQL services and SQL Monitors. I ticked the parameters I want to monitor and clicked OK. I get the message 'Successfully added MSSQL services & monitors' on the top, But I can't see any monitors under Application Monitors. Now when I select Add Monitors -> MSSQL Monitors (WMI Based), all the parameters I set were there, but I can't untick them. The server I trying to monitor
Error adding Vendor Specific
I've attempted to add GE UPS monitoring to our OpManager, it doesn't appear to be working correctly. I've followed http://support.opmanager.com/sd/AddSolution.sd?solID=5702 but when coming to test, say, UPSCharge, the test window pops up with the APC UPS OID listed and then fails to read anything. Why is it still using the APC OID's?? It's set as the new GE UPS type I've created and the XML files have all the correct OID's :(
Bulk Change of Interface thresholds on VLAN interfaces
How do I change the interface thresholds on all my switch interfaces? I go into admin->interface thresholds and make the change. I get a script error after making the changes. I don't abort the script, but all the ports are not changed to the new thresholds, only some of them. None of the VLAN interfaces are changed.
Integration with SD plus
HI, I have installed opmanager 7 and now I want to integrate with SD plus. Integration guide there is a setting go to admin and in global settings I am not able to find Addon/Products... So how to move forward. YAsh
LAYER 2 unrouted VLAN traffic
hello, I would like to know if there is a way to configure OPMANAGER to monitor LAYER2 unrouted vlan traffic , when i discover switch it only discover LAYER3 vlan as interface , I m more intrested in monitoring traffic of unrouted vlan�s is there any special MIB ? THX in adv. Regards
Switch Port Display Name in Email Alert
Hi, I have Opmanager MSP Edition Build 6004. There are around 50 to 60 Switches configured on it and alerts also have been set for specific functions, now the issue here is that when any port goes down it sends an alert to the team with the Port Number in the mail rather than the Display Name, this becomes very nuisance for the Team to recognize. Is there any string to be set for Alerts, please let me know. Regards, Rajan Modak
OPmanager Alert
Hi, We are trying to evaluate ur product for our MSP. I installed 1 probe and opmanager MSP adition 6004. I have added a windows service to monitor. I have also configured the snmp service to send trap to probe. But I am not getting any trap or Alarm in the Opmanager when I stop the service. Similarly I wanted to know is it possible to do monitor a process in Linux or Unix systems? Can we get a trap? Where can I see the snmp traps coming to opmanger?? Regards YAsh
Can't get bandwidth graphs for Cisco PIX v7.2
Hi, I have two PIX515E firewalls running PIX7.2. Neither of these show any bandwidth usage details, although the list of interfaces is populated correctly. And ideas why? many thanks, alec
Oops looks like a few tables got corrupted.
hi. Using OpManager 7 GA with MySql I get the following message when the logon screen comes up "Oops looks like a few tables got corrupted. Don't worry.. Run RepairDB.bat from bin directory and restart the server". It was working fine for a few days after install then when I tried to logon this morning I get this error. I run RepairDB - it seems to work but I still get the same error when I restart OpManager. I shutdown Opmanager services before running repairdb. Eeekkk. thanks, Lerwick
Notification by Modem
When will OpManger have the ability to send out Notifications through a standard modem?
Monitoring of LINUX servers
Hi - I have OpManager 6016 running and need to monitor some LINUX machines. I have been given the details of what to monitor but can only find hrSystemUptime in the Host Resource MIB and required monitors in other MIBs. Other monitors required are such as procStatus / diskPctUsed etc and I'm a bit stuck. Is there a MIB I should have but don't have? Was going to use Custom Monitors for these. Also - The LINUX serversa arrn't mine and the admin of the boxes is insisting snmpwalk should be used to get
Reports for URLs
Hi all, I'd like to be able to schedule availability and response time reports for standalone URLs and also for URLs attached to Servers. Can it be done? many thanks, alec
op manager probe dies
hi, I have installed opmanager7 probe and central. I restarted the server and now th probe runs for some time and stops. will you pl help me. Regards YAsh
sql query for group status
Hi, could someone enlighten me about the way to pull the status of the groups (Routers, Switches, Desktops...) from the database? we're looking at monitoring these statuses as "applications via app manager and i can't find the DB entries for it. in fact i can't find the group definitions at all.. i notice that a device type of "switch" is in the "switches" category, but adding my own category there's no way to configure the plurarl and all that... anything in my "Appliances" category is an "Appliances"
Help !!! Unable to start OpManager
wrapper.log : STATUS | wrapper | 2005/05/27 11:17:48 | Starting the ManageEngine OpManager service... STATUS | wrapper | 2005/05/27 11:17:48 | --> Wrapper Started as Service STATUS | wrapper | 2005/05/27 11:17:49 | Launching a JVM... INFO | jvm 1 | 2005/05/27 11:17:50 | Wrapper (Version 3.1.1) http://wrapper.tanukisoftware.org INFO | jvm 1 | 2005/05/27 11:17:50 | INFO | jvm 1 | 2005/05/27 11:17:52 | Web server port number : 80 INFO | jvm 1 | 2005/05/27 11:17:52 | taryIconProps {DefaultMenuItem=Status,
Server availability report
One of my server shows 38% availability in monthly report (June). Is there anyway to change this value because i forgot to put this server in downtime scheduler? Thanks.
OpManager7-Hotfix
I have applied this patch to my OpManager 7.0 installation,but the Issues leading to 100% CPU usage are still exist. qingshishui Regards
NOCserver properties
NOCserver properties used to be part of opmanager msp 6 but not 7 How do i configure opmanager 7 to commnicate with the central server at a remote location. secondly i have a licence for opmanager 6. but due t difficulty in getting opmager msp 6 to work on our lan i decided to try opmanager 7. which does apper to be working. (Though like i indicated this lan has to be monitored from a remote location so it should communicate with a central server.) can i convert my license to cover the evaluation
Automated Backups for OpManager
I have a scheduled task that is supposed to run backupdb.bat every night. The task isn't closing properly because backupdb.bat ends with a "press any key to continue" prompt. Is there any way to edit this out of backupdb.bat? Thanks, Carolyn
TAP paging
We are trying to utilize paging software from within OpsManager. Is there one that anyone recommends for use with a standard modem and TAP numbers? It's very difficult to receive a cell phone signal within our Data Center. Thanks in Advance
discard alarms on all Nortel blade switches
Hi, on my trial of OpManager 7004 i've Cisco 2950's, 2960's and 3750's and they're apparently humming along just fine, but i've also 8 Nortel GbESM L2-3 blade switches, and OpManager is reporting that various ports (basically any that are in use) have 100% discard rates, which is obviously not correct. looking at the snmp if table directly one such interface has ifInOctets sitting at 24640, and ifInDiscards at 289. doing the maths this is what... 1.2%? yet OM is saying it's 100%... what gives? Thanks
how to enable snmp in juniper netscreen 5gt
Hi can anyone tell me how to enable snmp in juniper netscreen 5gt, i need to test opmanager Santhosh
Fetching the IP routing table - incomplete results?
Hi, I seem to be having trouble getting the IP routing table back from my Cisco routers. I only ever seem to get back the gateway of last resort (i.e., the static default route). No other static or dynamic routes appear in the OpManager output at all. This happens with OpManager 6 and 7. many thanks, alec
Availability charting
Seems to have died over the weekend. No statistics or graphs. Ran the repairdb util in case the db got scrampled somehow but that didn't solve anything. Help.
Linking external databases / programs
Hello I'm evaluating OpManager 6.0 for my company. The tool looks pretty good but i couldn't find out if it's possible to get external tools to work with OpManager. We've got some self-coded Tools (PHP/MySQL, Lotus Notes) which held much information about our servers and clients. So my question(s): Is there something like a scripting interface for OpManager? Is it possible to extend it with little effort (no big programming etc.)? It would be possible to hack some scripts to sync the different databases
Cannot monitor sub interfaces
I have a Cisco 2811 with 2 ethernet and 2 serial interfaces that I am monitoring with OpManager Ver 7. The 2 ethernet interfaces and one serial are being monitored correctly however the serial interface that has sub interfaces does not seem to work. OpManager is not retrieving any stats for the sub interfaces. Is is a known bug? Please see attached. Thank you Ramzi
Next Page