Why you should right-size your IT toolkit
Right-sizing is used in a business context to optimize the efficiency and output of an organization's workforce. It generally involves three steps: Identifying organizational objectives Defining the right amount of people with the right skillsets Hiring,
Add MB, GB disk thresholds to Quick Configuration Wizard
The Quick Configuration Wizard is limited to % Partition space. There should be an option to use the QCW on MB, GB volumes as well. It would give a lot more flexibility to applying granular thresholds, especially to Linux hosts, without using the Template
Linux Disk Space Monitoring
We are currently using CLI to monitor disk usage on our RHEL environment. The problem is it adds ALL volumes then even the relatively useless ones like usr, boot, dev, etc. This makes it difficult to have a threshold monitor because it gets applied to
OpManager - Observability & Dashboards
Dear Team, do you have any plans to improve Observability & Dashboards of Opmanager? Currently OpManager is "oldschool" monitoring system where is absent modern views and dashboards about infrastructure state. Could you internally discus about adding/changing
UNABLE TO LOAD LICENSE
Encountering this error kindly assist: Microsoft Windows [Version 10.0.14393] (c) 2016 Microsoft Corporation. All rights reserved. C:\Program Files\ManageEngine\OpManagerCentral\bin>shutdown.bat C:\Program Files\ManageEngine\OpManagerCentral\bin>stopPGSQL.bat
Syslog Rule not working
Hey, we want OpManager to create alarms/events when receiving specific syslog messages sent by Palo Alto Networks Firewalls. Incoming syslog messages can be observed however the corresponding syslog rule won't trigger any event. Regex experience is limited
Deactive License
Hello, I want to make a new fresh server for opmanager, should i deactivate the license on old server? How i can do this?
Join Us at ManageEngine ITOM Day Madrid!
Digital transformation is at the forefront for many Spanish companies, with 65% planning to boost their budgets in this area by 2024 (IDC Madrid). As IT landscapes grow more complex, reactive problem-solving just doesn’t cut it anymore. That’s where full-stack
Error
I see this error on opmanager You are not allowed to apply this license with HighPerf(Vectorwise) or DPI addon in HighPerf(CStore) installed setup, contact our support for further details.
Teams integration: Ability to configure URL separately from hostname
We need the ability to set the url the server is configured for, separately from the hostname. For instance, we're using the Enterprise version and have a central server along with probes. In my case we're using the Teams integration to push severe alerts
Local Server hosted website checker
Hi, Does ManageEngine offer a solution for checking a locally hosted website? I have a local server that hosts an application and looking for something that can check the URL and if the site is down send an email notification
Email Notification for specific interface down from different Cisco devices
Hi all. We have many access switches in our network. Access ports go up and down several times a day. We get a lot of alarms and those are difficult to maintain. However, I have separated some important interfaces and want to generate email notifications only if these interfaces go down. But while creating notification profile, i could not find any option to choose specific interface; only whole device can be added to notification profile. If anyone knows how to add only specific interfaces of some
Move device to different Poller
Is it possible to move a device from one polling engine to another as we've maxed out the number of interfaces on one polling engine and want to move some of these devices to a different polling engine?
Can Intel Arc drivers cause conflicts with ManageEngine monitoring tools?
Hi everyone, I’ve recently started using a system with intel arc graphics, and I’m wondering if there could be any potential conflicts between the intel arc graphics and ManageEngine’s monitoring tools (such as OpManager or Applications Manager). Has
[Webinar] Elevate your IT service management with the OpManager and ServiceDesk Plus integration. Join our webinar to learn how!
Hello there, Are you facing challenges in maintaining an accurate CMDB or visualizing your Layer 2 devices and virtual machines to resolve issues quickly? If reducing mean time to resolution (MTTR) and ensuring business continuity are priorities for you,
Recover PST Password
Hello Everyone, There are lots of users searching for a PST Password Recovery method to recover their PST Password quickly in a few steps without using MS Outlook. If You have any Standalone application like MailsDaddy PST Password Recovery Tool then
Network Path Analysis
Join Us at the ManageEngine ITOM Workshop | DELHI
We are thrilled to invite you to the ManageEngine ITOM Workshop on September 20th at the prestigious Radisson Blu Plaza Hotel, Delhi Airport. This workshop is designed for IT professionals who are eager to enhance their skills and deepen their understanding
Add new category
How do I add a new category in OpManager? Straight forward please, I have read previous years old responses to this question and it makes no sense. Why would I add a new category of "IP Camera" with parent of "server" or something? Can't be this hard
How do I Export Zoho Emails to PST?
A remarkably effective, safe, and quick method to export Zoho emails to PST file format is the reliable and effortless approach Advik Zoho Mail Backup Tool. With only a few simple clicks, this tool makes the migration of your Zoho mailbox easier. Your
Time Window for Reports
Currently when generating a report for availability using a "Time Window" you have the option of either 24 hours or 8.00 AM to 8.00 PM (12 hours). Unfortunately this does not support our reporting requirements. We are required to report on the availability of devices during business hours which are 7am to 9pm. It would be great if there was greater flexibility in the Time Window allowed.
Add Cisco ACI - Cert problem?
Hy, i'm trying to add Cisco ACI to the OPM. My hypothesis is that this is a certificate problem. My user/pass is good because it works if I use it on my browser. I created ACI profile and tried to add ACI but I get instant fail w/o waiting for timeout.
Facing Some Issues with Core i5 Laptop and ManageEngine OpManager Product. Any Advice?
Hello everyone, I’m having some trouble using my core i5 laptop with the ManageEngine OpManager product and would appreciate any guidance. Details: Laptop Specs: Intel Core i5 laptop, 8GB RAM, 512GB SSD. ManageEngine Product: ManageEngine OpManager (Version
snmpv3 for aruba switch
what is the proper what to enable snmpv3 on aruba 2930F switch? i have this on my switch but Opmanager says snmp credential failed. snmp-server community "groupname" operator snmpv3 enable snmpv3 only snmpv3 restricted-access snmpv3 group operatorauth
sysLocation & System Location
How does this actualy works on OPM? Is the sysLocation used anywhere in OPM? How do I get "System Location" field filled in my OPM? Is it SNMP or Custom variable that I need to put in Manualy? Is there a possibility to create a custom monitor for sysLocation
Host name changing in Opmanager pro
I had migrated few of our server to another domain so after doing that the FQDN of server has changed (from: devicename.ugamsolutions.co.in to devicename.ugamsolutions.com) Need an option through which we can directly change the IPadress & FQDN(Host name) for the devices Regards, Muzafar
Adding a Category in OpManager v12.1
Hi, Is there a way to add a new category in OpManager v12 as most of my devices are categorized as unknown. These devices includes cameras, access control panels, Moxa Switches etc. for which there is no category. Regards, Mohsin
[ManageEngine US workshop - ITOM] Sign up for an in-depth training on ITOM solutions.
Exciting News! Join us for our ITOM workshops in Houston on August 20 and Chicago on August 22! 🌟 Get hands-on with ManageEngine’s solutions as our tech experts help you tackle any ITOM challenges, optimize your ROI, and enhance your IT management strategies.
"NMSMServer" and "mstransportProvider.conf" file
Hi admin, When I walkthrough in OpManager install folder, i see that it have the class NMSMServer in NMSServerClasses.jar. In the code, it said that i need to have "mstransportProvider.conf" file to able to run but i can not find that filename in anywhere,
OpManager Enterprise - Type of connection between Central and Probe
Hello everybody, what type of connection is needed to allow the central to communicate with the probe? Is any internet connection sufficient or must the two private networks communicate with each other, for example via VPN or a layer 2 extension?
Central>>>internet
How to get verified or approved?
I am here to know the whole process of approving or verifying my account. How can I do it manually or request somewhere for it? Hope the admin will understand my problem and let me get approved. Thanks Regards Jaime Wilkinson
Downtime duration for other events
Hello OpManager Team 2 years ago i wrote about Downtime duration data for notifications It was deployed some time ago - big thanks for that. But for now, this information only applies to device downtime. Could you please increase the scope of this feature
Warning
Dear support, i have added two devices to OpManager and receive for both devices the following message: Discards rate for Interface 'is 38.496 threshold value for this monitor is 1%. - What means this message and how can i change the threshold? - Which
On-heap PolledData cache entries count has exceeded
Hi all, I've encountered this error on ManageEngine OpManager version 12.4.154 The error message states "On-heap PolledData cache entries count has exceeded 30,000, which might affect product performance. Kindly contact our support team with logs for
How to use MainSocketServer in package 'com.adventnet.management.mstransport'
Hi, I am trying to apply OpManager to my cooperation. Can anyone help me to use or trigger the MainSockerServer in pakackage 'com.adventnet.management.mstransport' in file ManagementServer.jar in classpath to send and receive data.
Configuration Manager Issue
The "configuration management" feature detects changes in the configuration of the mikrotik routers, but only because the date has changed. Generates many false errors. Is there any way to change this problem?
Opmanager + Exchange Reporter
Hi all do You know if it's possible to install Opmanager and Exchange reporter on the same server ? I need to monitor Exchange 2016 and 2019 Thanks Davide
TXT-files in Opmanager Agent directories caught as Malware in Defender EDR
Hi We are using Opmanager with Agents only on Windows Servers. We also utilizes the full Microsoft Defender suite, former Defender ATP, as EDR. We have received a high alert on Malware blocked on 1 Windows Server. The Service and the actual file both
Import Outlook Emails into Gmail
Nowadays, moving from one email client to another is very common. Likewise, many users want to import Outlook emails into Gmail account. To do it, users need a powerful solution that can accomplish this task in a little bit of time. We recommend users
[Free Webinar] How to stop running your IT operations on accidental discoveries
Hello there, In modern ITOps, reactive troubleshooting is no longer sufficient. The solution? A proactive approach powered by data-driven monitoring and alerts. Our latest webinar explores proactive strategies that drive IT operational efficiency, enhance
Next Page