Downtime Schedule Issues
Is there a visual method that identifies when a server/group/categaroy is actively being repressed do to a Downtime Schedule? When a Downtime Schedule is in effect, does it simply prevent E-mail alerts from being fired or should it also just "not poll" the object chosen. For example, I have two servers scheduled to be in a Downtime status, but both are still showing on the Server Maps page as in alarm. We would prefer to have the server icon changed to something identifying that it's down for
Business View Maps - I cannot add new devices
Hi, I'm having trouble with Opmanager. When I try to add new device on any "Business View Map" nothing happens. I couldn't find any messages errors in the logs. The OpManager version is 8 and is been used MSSQL 2005 on back-end. Can I run a repairdb utility with MSSQL 2005? Details: Build Number : 8811 Latest Version :N/A Expires on : Never Maximum no of Devices : 250 Total Monitored Devices : 246 Total Monitored Interfaces : 348 Thanks, Thiago Morais
Unable to update opmanager netflow plug-in from 8500 to 9000
Hi Everyone, Greetings! I was able to successfully install Opmanager build 8812 but Netflow could not be updated, an error message appears after post-invocation saying: "Error: Uninstalling". The following are the contents of update.log: Oct 15, 2011 11:19:03 AM com.adventnet.updatemgr.util.ConfUtils parseXMLAndInstantiateDB INFO: Final setdbhomearg :: [false] Oct 15, 2011 11:19:03 AM com.adventnet.updatemgr.util.ConfUtils parseXMLAndInstantiateDB INFO: properties sent to adapter initialization ::
Alarm if interface utilization is below a threshold
Hi, in some case it will be useful be alerted if the traffic for a particular interface is below a threshold. It should means that the device or the interface is having some problem even if it is not down physically or logically. For example an Access Point that drop all the connections. Is it possible to create an alarm for this kind of behavior? Regards
Do any one have a valid Temperature OID for cisco switches 2960?
I have this OID with me .1.3.6.1.4.1.9.9.13.1.3.1.6 but it doesn't return any output. Maximum of my switches are cisco 2960 and I want to monitor the temperature on these devices. Does anyone here successful in the monitoring the temperature for cisco 2960, please help me with the required information.
Some stray entries found for this device
Hello I'm having this problem when I want to add a Device (From virtual devices) Thanks in advance
OpManager Profile for D-Link DFL 800
hi i want to configure a device which is D-Link DFL 800: http://www.dlink.com/products/?pid=453 which profile to use? Thank you
API for OpManager
Is there an API for OpManager, I have a developer here asking for it if there is one.
Memory by process
Is there a way to generate an alert when a specific process is consuming 'x' amount of memory and then generate an alert? I know NetIQ/MOM/SCOM can but those are agent based monitoring tools. Thanks.
OpManger 8 on Linux with WMI?
I just installed OpManager 8 on Linux as a development test. I currently have OpManager 8 running live on a Server 2008R2 server. Does the Linux version support WMI like the Windows version does? I notice under credentials on my Server2008R2 OpManager install, there is a Windows credential selection and on the Linux version there is not. Is this still a limitation of the Linux install or is there a module that I can load into the Linux version to get WMI compatibility? Thank you.
OpManager Switch Monitoring - Ports marked as Trouble, only some of them trigger Alarm?
We have two switches being monitored with OpManager, both are HP ProCurve 4208vl Chassis switches (J8773A). We're using the Free Edition of OpManager build #8720. When looking at our switches in OpManager, there are a number of ports highlighted with an orange circle indicating trouble on the port. When we click on the port, it shows the Administrative Status as "UP" and the Operational Status as "DOWN". There is no traffic passing through these ports as there are no devices hooked up to the other
10Gbps interface bandwidth chart issue
Hi, Is there any fixed on the bandwidth monitoring issue on 10gbps interface? From the measurement the chart looks like below: Thanks Don
build 8721.. "Entries for device, either partially added or removed"...Click {here...} ends with invalid IP Address
Custom device "SAN"... I deleted a SAN device, and now want to readd. I get the Entries for device, either partially added or removed"..., then I Click [here] to clean up the entries, which promptly results in "Invalid IP address. Please enter again. I have a reverse lookup entry for the IP. The IP is valid, it's class B, routable... so need some help getting this device back into opmanager. CFBurns FYI this is MSSQL 2005 back-end
False Positives
Hi, Can anyone help me. I receive a large amount of alerts when there doesn't actually seem to be a problem. The majority of false alerts seem to come through for servers or services being down when they are not, and websites not working Any ideas?
Backplane Utilization for Cisco Catalyst 4500
Hi, Anyone out there manage to configure Backplane Utilization for Cisco Catalyst 4500? I follow this post, but still fail. -- Regards, Anandharaj System Engineer (Unix / Linux)
DHCP question
I'm monitoring DHCP and free addresses and OpManager is reporting incorrectly the number of free addresses. I found a similar posting but i'm using MySql and I don't know how to amend the command. https://forums.manageengine.com/topic/dhcp-scopes-number-of-free-ip-addresses
SNMP Trap help
In the below PIX trap, what exactly do i need to do to get rid of all the un-decypherable OID digits and have real understandable text? In SNMPc I used to have to compile into the Mib Tree all of the PIX mibs. I am still uncertain of how Opmanager does this even after reviewing the Demos and HOW-TOs. Can someone shed some light on what exactly I need to do. Severity Trouble Last Updated May 17,2005 11:50:24 PM Message .1.3.6.1.4.1.9.9.41.1.2.3.1.2.0: 20, .1.3.6.1.4.1.9.9.41.1.2.3.1.3.0: 4, .1.3.6.1.4.1.9.9.41.1.2.3.1.4.0:
Virtual Tunneling (Virtual Interfaces)
Hi Guys, I need your help please. We have a device in our Network, using the following MIB code: snmpv3mibs mibII/snmp_mib mibII/system_mib mibII/sysORTable mibII/vacm_vars mibII/vacm_conf utilities/execute mibII snmpv3mibs ucd_snmp host This device, Creates GRE Tunnels, between our CE, and the clients Device. These are Virtual Interfaces. The operstatus of these, are always down, because there is not a Physical Connection ? So this means, that Opmanager always gives this Interface as
Juniper power supply monitoring
I'm looking to monitor our Juniper switch power supplys and i'm having trouble getting it to work. These are the steps i've taken so far: (1) Mibs copied correctly and mib for p/s identified (2) Went to Admin --> SNMP Trap Processors --> Load From Mibs (3) Created notification rule for to alert on condition when power supply fails When testing, we're not receiving alerts that a power supply has lost power/failed. Any ideas? I know traps are being rec'd b/c we receive other alerts from the switches.
VMHost Status Critical without Alarms on Host or Child VMs
Hi All, We have a strange issue where the status on a VMHost is not clearing. There was an alarm triggered which set the status to Critical relating to the HTTPS Web connection failing (I do not have the exact message). The alarm has cleared however but the status remains as critical. I have checked the child VMs and there are no other alarms (someone suggested on this forum that a child VM could potentially cascade the Critical status to the host?). I have had this issue before and it was
Wrong credentials used with SNMPv3
Using OpManager 8.0 build 8812. The credential library seems to use the wrong set of credentials when multiple SNMPv3 credentials have the same username. For example, I can create a SNMPv3 account with username user1, authentication of pass1, and a second account with username user1, authentication of pass2, then assign these two accounts to two different devices. Communication with the first device is successful, the second device fails as OpManage wrongly uses credentials from the first account
Performance Monitor Failed to Capture for 3Com Switch 7700
Hi everyone. Need your help here. I've got a problem to capture data for performance monitor of 3Com Switch 7700 (Mem Utilztion, CPU Utlztion, etc). The credential test was passed for both snmp and cli. But for test monitor its failed. any ideas? i already rediscover this switch twice, but still failed. help me pless.. Big tq..
APPLNERR: Login Failure: for the agent
I try to integrate our Linux server via cli. The logfile says --> APPLNERR: Login Failure: for the agent but the credentials are correct. same error via ssh or telnet. Various tests are ok with putty from the OPS server. what can I do?
SNMP Monitor "test" fails
Hi, I am getting an error when I try to test a monitor that I created using a specific SNMP OID. The error message I get says "The Monitor did not respond to the test request". I can successfully query the SNMP agent on the device from the command line (snmpget) or through the MIB browser. Any ideas? (Screenshot attached) Steve
Clear alarms after service is up again!
When a service goes down, a alarm triggers just as i want to, but when the service is restarted and up again, the alarm that activates when the service goes down is still active! are there any rules on how i can fix this, when the service is restarted again i dont want the first alarm being active! Info Sep 16,2009 12:34:04 PM Windows NT Service EN BATCH is successfully restarted Service Down Sep 16,2009 12:34:02 PM Windows NT Service EN BATCH is Down here is a picture of it: <a href="http://sv.tinypic.com"
IBM xSeries servers Hardware monitoring.
Hi, I'm unable to monitor the hardware status of IBM x3650 series servers. I've enabled SNMP. Is there any additional service need to be installed for hardware monitoring.(like hp insight manager.). Does any one has the detailed steps. Thanks in advance, Arun
OpManager - Monitor Temprature of Non IBM, HP or Dell systems
Hi, i want to monitor Temprature of different systems which are NOT Dell, HP or IBM. as in monitors there are following under following sections but does not work and gives the error Dell PowerEdge Monitors Server Temperature SNMP HP Proliant Server Monitors Temperature SNMP Temperature Threshold SNMP IBM Blade Center Monitors Temperature SNMP But what if the
E-mail notification after "attention" alarm is clear
Hello. How can I set Op Manager to send me an e-mail notifications after the alarm of Attention severity has cleared? Now I get "clear" notifications only after a critical alarm will be cleared. Thank You for any help Kind regards Jacek
Can't start OpManager, License Dialog box appears
Hi After a server crash I am now unable to start the OPmanager server. WHen I start it it launches a licensee Details dialog box and wants a license file. When I point it to our current license file (which was working fine...) it says the file is invalid and I get and error code 501. I have tried to fix this by installing the latest service pack and hotfix but to no avail. Any idea? Thanks Dave
OpManager Service Frequently Stops Responding
Hi, We have had issues with a customer's standalone version of OpManager for over a year now, we hoped that by upgrading it to the latest version 8812 these problems would be resolved, but they still persist, the customer is aware of these problems and is not impressed by the reliability and stability of OpManager. The OpManager service frequently stops and therefore prevents device statistics from being gathered. Looking at the wrapper file, the following lines stand out as being part of the problem:-
How can I set negative threshold values when monitoring SNMP devices?
I have a need to monitor some microwave devices via SNMP. Some values (RSL, dB, etc) return negative values. When I set up my thresholds in OpManger, I receive an error that my threshold values must be positive. How can I monitor these devices?
SNMP extreme networks
Hi, I'm trying to configure snmp monitoring for extreme switches, but I'm having more problems with their mibs. Which are the correct mibs for extreme networks? I tried to import: extreme.mib v762b3.mib RMON2-MIB.mib RMON-MIB.mib can you help me? thanks in advance bye daniel
Enabling SSL in OpManager
Hi All Today I was going to enable SSL in OpManager but when I tried to download the ssl-enabled apache version from http://bonitas.adventnet.com/opmanager/12Sep2007/apache.zip I could not find anything to download... (error 404 page not found etc.) Have this package been moved from this URL? Where is it available for download? Thankyou G
OpManager - Alert Emails
Hi All, I am constantly getting alerts to say a certain device is down, I need to know when this type of device is down but I dont need OpManager to email me each time it misses a poll after Ive been notified that it is down. Is there a way to configure OpManager to send 1 email to notify me the device is down and then cease emailing me each missed poll thereafter? Thanks!
MySql DB Table Corruption
My system crashed last overnight. When I got it back up and running, I find that OpManager will not load. When I look in my Application Event Viewer I receive the following error: Event Type: Error Event Source: MySQL Event Category: None Event ID: 100 Date: 2/18/2010 Time: 11:34:44 AM User: N/A Computer: WLIBERTY-VLS3 Description: mysqld-nt: Table '.\opmanagerdb\polleddata' is marked as crashed and should be repaired For more information, see Help and Support Center at http://www.mysql.com.
Customize Alarm Message (eventlog rule)
Hi, Is it possible to customize the alarm message wich is displayed in the alarms list, when a event log rule is triggered? When I create a custom eventlog rule, the alarm 'Alarm=xxx Source=system Type=2 etc' is raised. Can I replace this part for a custom text? Regards Ralph
Problen with OpManager's notification profile passing agrument value to batch file.
My OpManager's notification profile was set to call my batch file everytime that the device send the SNMP trap to OpManager. But some agrument value such as $IntfField(ifName) did not pass through my batch file. Do you have any advice ? test.bat ----------- @Echo off echo %1 - %2 Down > C: est est.txt test.txt (output from notification profile call test.bat) -------------------------------------------------------------------------- "Oct 06, 2011 02:28:07 PM" - "$IntfField(ifName)" Down
Help with Juniper EX
I'm preparing to monitor our Juniper switches via OpManager and after reading the posts for Juniper i'm still a little confused on what to do. I know I have to place the mibs in the correct dir on the opmanager server and I have a way to import the mibs into an snmp walker so that is not the issue. I downloaded the mibs from Juniper but they're in txt file format, not mib. Do I need to convert them to mib or cfg files? If so, how? And what mibs so I need? I want to start off with basic stuff
OpManager product presentation
Hi! I wonder if there is any ppt of opmanager? I found this but it´s a year old, otherwise it´s very good, i just wonder if there´s any newer version? https://forums.manageengine.com/ # topic/49000004308284 Thanks Erik T Channel Manager Inuit, Sweden
Threshold Notification Question
Good morning! OpManager is a little new for me as I started a new job and OpManager has been placed in my lap. I do not know a lot about the system and am learning on the job. The previous person who was handling this also seems to have made a bit of a mess of things, which I am trying to clean up. Right now, every server is monitored for CPU, Memory and Partition Sizes. Depending on the function of the servers, more items are monitored but that is our bare minimum. Recently, we modified
Next Page