Displayname is not hostname?!
I'm currently evaluating OpManager and struggling with the device "names". Discovered routers, switches, etc are being displayed by their IP address by default - not their hostname/system name. I found this thread from 3 years ago saying this was being addressed. Did this never happen, or is it a setting that can be changed? https://forums.manageengine.com/forumHome.do?forumGroupId=49000000002007&forumTopicId=49000002645655 In all views we essentially want to see the hostname/system name rather than
Need a better way to find duplicate devices
I have some servers that have multiple IP addresses assigned to one interface, and OpManager identifies each one as an individual server. There needs to be some intelligence in the discovery process that can match these interfaces with one server. Also, there needs to be a function in the Admin screen to show all duplicates- hostnames, IPs, etc. I often find a device called server1.domain.com in "Servers", and another device called SERVER1.domain.com in "Desktops". Both point to the exact same device.
SQL monitor - report as table
Hi, I have an SQL2005 with almost 100 DB being monitored properly by OP-Manager through the SQL Add-ON. I can have a report from Database Monitors / Data base files, but the result is a page with 100+ graphs. If i try to run the last 7 days report, all is way too small. Is there a way to have this report like a matrix. I would like to have some DB file increase information and through the graph I cannot get acurate information. Also MYSQL table relations could be good for me. Thanks and Regards,
Firewall Analyzer 7 Add-On "Jump To".. not working when FA is using SSL
I installed Firewall Analyzer add-on for our Network Operations team to check it out. The Opmanager Add-on Configurations do not accommodate the "jump to" feature when Firewall Analyzer is using SSL. Would appreciate that being fixed, they have not checked it out yet.
Maintenance Schedule - Notes
We use the downtime scheduler often. I would love a new feature to put in a note about the scheduled outage. In this way someone who is uninformed of the planned maintenance, should they look in opmanager, could see why, and what the maintenance window pertains to. I would like the noted comments to appear on some bubble window or some such for every device that is added to that downtime scheduled maintenance. Thank you
Dell 2700W UPS
Hi I've added 2 Dell UPS's to OpManager, while its finding them etc, it doesn't appear to querying the status, such Charge, Remaining Time etc. I've switch on SNMP etc, but still no joy. Can anybody advise on this? Do I need to setup a device template for them?
Alarms
Is there way to adjust the alarm threshold or criteria? I would like to monitor my interfaces so i do not want to change them as unmanaged but I am having an issue with receieving way to many alarms. For example if an interface goes up/down or if the utilization exceeds 30 percent OpManager generates an alarm. I am fine with the software keeping track of that type of information however there is no reason to generate an alarm for such types of messages, otherwise I receive so much noise I am forced
Some interfaces still can't get NFA data on OPM
Hi Support team: I found some interfaces still can't get NFA data on OPM（My probe OPM integrates with NFA standalone）. Then, I have checked my Cisco 2811 devices' setting again and thought the setting was OK as given below,My license of NFA still allow to add some interfaces to monitor： sh run: interface FastEthernet0/1 bandwidth 4096 ip address XXXX 255.255.255.252 # XXXX is interface's ip ip flow ingress ip flow egress duplex auto speed auto ip
Circuit ID
Is it possible to search by circuit id?
Business view: multiple links from one node
Hi, I've recently updated our OpManager installation to 9101. Now I have strange problem with existing (and new) business views. It seems that I cannot create links ie. from node a to node b and c, so that monitoring happens on node a interface (ie. eth0). Before upgrading this was possible and I have old business views that have multiple links from one node to many, and the monitoring happens on the one -side. Is this a bug or feature? If this is a feature, it makes the whole business view feature
OPManager 9 Alarm message problem
Hi I was Installed OPManager 9....now i have problem in Alarm Message..OPManager 9 Alarm Message not consistent with source..for example source server does not have SQL service but i have Alarm Message service SQL down for this source.now i have service down for some source like this, (Alarm Message does not match with source)
Syslog viewer - Almost impossible to see syslogs as they come in...............
Hi guys. I'm trying to add a bunch of syslog rules in OpManager 9 to generate alerts as they come in from syslogs. Whilst the feature appears to work quite well once I define my rule etc. I'm finiding it almost impossible to actually capture a sample syslog message as it hits OpManager as they scroll past so quickly and there's no facility provided to view all logs received over a given time for instance. Also, I don't seem to be able to copy and paste the syslogs from the syslog viewer. Can you
Opmanager not able to start
My Opmanager is failing to start after getting a database connection loss error message. I restarted the server and started the service. Then it says my database is corrupted. So I did a database repair. When I stopped the Opmanager service to repair the database. I keep getting this error message "myisamchk: warning: 1 client is using or hasn't closed the table properly myisamchk: MyISAM file mysql\data\OpManagerDB\topouserprops.MYI" How can I resolved this issue ?
Network Printers with Web Services
Hello, We have a number of networked printers that have their own web services (HTTP, FTP) that we would like to monitor along with the rest of the default printer monitors. It seems, by default, the Printers category does not have the option to monitor services like these. Is there a way to add this to the Printers category, or would I be forced to create a new group specifically for this purpose? How would I go about doing this? Thanks
Set Dependency in bulk
Hello, Almost all of my devices have one dependency due to the setup of my environment. I would like to be able to associate most of my switches, routers, and servers with this one dependency in bulk. Is there any way to do that? If not, that is definitely a feature that should be added.
view and set alarms on sms queue
Hi! i would like to see the option to be able to view the sms queue in the web gui and also be able to set e-mail alarms if a message is not sent and older than x hours or days Regards Patrik Westberg
VMWare Hosts show No Data Available
Hello, all our VmWare Hosts show in the Host Health- and in the History Reports section: No Data Available. We use OpManager Version 9001. Can you please help. Thanks in advance and Best regards Marco
View Devices Attached to a Switch Port
I'm trying to decide between OpManager and AdRem's NetCrunch for a network management software, and the one feature I'm really sold on for NetCrunch is the ability to list the interfaces in a Cisco switch and then the corresponding MAC address, IP address, and hostname (if resolvable) that is visible from that switch (lists one if only one device is attached, lists multiple if another switch is beyond that port, etc.). If there is a way to do this with OpManager, I'd be very happy with it since
Unable to allocate from the system nonpaged pool error
Good Evening, Ever since I installed the latest version of OpManager, I've had to reboot the server roughly twice a week due to the server crashing. These errors begin about the same time the server crashes: Error MessageError # The RPC server is unavailable. for the device *** Error MessageError # The RPC server is unavailable. for the device *** Error MessageError # Not enough storage is available to complete this operation. for the device *** Error MessageError # Not enough storage is
MPLS Tunnel Monitoring
How can i monitor the MPLS tunnel in OpManager plz help me out of this.. Thanks, Kamaraj K
OPManager 5.6 change timezone
hy everybody, i installed the OpManager in Germany. Problem is the timezone is default programmed for england. message there OpManager at moment generatet, the time is 2 hours back to. how can i change the timezone for germany. thanks for help chris
Interface 'Intel(R) PRO/1000 MT Network Connection-Local Area Connection' is down.
Hi, I recently added 9 virtual terminal servers in OpManager to monitor services. Everything worked fine but suddenly our Terminal Server named TS3 started to give the error message: Interface 'Intel(R) PRO/1000 MT Network Connection-Local Area Connection' is down. The other devices are working perfectly. TS3 does have a Local area connection that is working. We used the Intel(R) PRO/1000 adapter but changed it to another adapter. I logged in into this server and went to Device Manager but
OpManager access
Hello, I've just completed the install of our OpManager server using Build 9101 on Windows 2008 R2. I am unable to access OpManager using http://<servername> or http://<server-ip-address>. Can some one tell me how to correct this please. Thanks.
is there any way to count Juniper policer counters ?
Is there any way to graph juniper firewall counters bandwidth (same as interface bandwidth)?
Network outage notification
With opmanager is there way to assign customers to devices, and then schuedule regular maintanence within opmanager and that will notify the customers associated to devices of said maintanence? EX. associate cust. A to device swtich1. Then i want to scheudule a maintanence window and assign swtich1 to that window. When that happens i want cust A to get an email with the details fo the maintanence window and any other information i put in the mainanence window. This would be very helpfull,
Multiple cores do not show under CPU monitor
I have a dual 6 core server that I am trying to monitor but the CPU monitor only shows a CPU0 and CPU1. I am using the WMI CPU monitor. I tried to open a support ticket but it will not let me login. I am running verison 9101 and the server I am trying to get the cores to display on is Dell R510 running Windows 2008 R2. Thanks
New Event Log rule not monitored
I have created an event log rule under applications for an event log entry that is created by an in house application. I have associated the rule with the server it runs on and added two notification profiles (SMS and Email) to notify on the event. When I cause the application to fail, thereby creating an event, it is not seen at all by OpManager. Thanks, Darin
Adding new device with specific interface type only?
Hi all I am new to Opmanager, and seem to have some difficulty when I add a new device, since all interface types is added as well. I have device with 500+ Ethernet interfaces and 500+ Proprietary Virtual interfaces, so adding them manually is a long process... So - is it possible to only add a specific interface type, ie. 'Ethernet'? Thanks in advance!
PDF Reports blank
We have a custom PDF report which shows all alerts generated from the previous 24 hours and since upgrading to Version 9101 from Version 9000 of Opmanager, this report is now blank. It does not show "Data not available", it's completely blank. Other reports like Availability work OK when generated from the device pages and running reports from the Reports page then saving them as PDF's woks fine too. An example is attached Any thoughts? Thanks Justin
Just upgraded to OPManager 9 - VMware issues
I got all my ESXi 4.1 hosts in OPManager, but I'm having some issues getting all the VMs to report properly. I had it checked to Inventory the hosts as it added them so I could see the VM's that were currently running on each host. All hosts show a couple VM's with no information. When I try to "Discover This VM" I get the error "Could not set the relationship". Some (not all) of them also got pulled in under the Server category and I'm not able to change it to VirtualDevice. I've confirmed
CLI monitor Linux get "Exception in getting the command output: Timed out"
Hi What could bee the problem with my disk monitoring Linux when I get "Exception in getting the command output: Timed out" error? CLI login is passed and another monitoring working fine it´s seems to bee disk monitoring (free disk space) and it seems to bee only 2-3 Linux server that has this problem.
Opmanager Rest Api
Hi, I would like to use the Opmanager Rest Api in a vbs script. Is it possible to add an event in opmanager via a vbs script. I tought it was very easy by calling the url. http:///api/xml/events/addEvent?apiKey=71f3a24c9aa776325b628108b44ef5b6&source=opman-winxp1 &severity=2&message=Process%20Down&alarmCode=ProcessMonitor_CPU_DOWN &entity=event_entity&eventType=Process%20Monitor%20Down But then I get the error 5005 HTTP POST request is required to perform this operation.
Adding devices/Interface Template
Hi all, I am having an issue when adding devices with 1000+ ethernet ports and 1000 vlans, since I only want the ethernet ports in Opmanager. Is it, in any way, possible to add a device and only adding specific interface types? Example - I add a switch and do not wish to add VLANS (Proprietary Virtual), but only Ethernet? Thanks! -Philip
Credential entry bug?
When trying to add credentials to the list of stored credentials I have encountered a problem. When entering a password that begins with either a $ or a � and click save, the credentials are not saved at all and I then cannot navigate off the page or store any more credentials. I have to close OpManager (I can't even log out) and re-connect to be able to continue. Any ideas? Thanks in advance Regards, Joe
OPM Alarm
Hi Support Team, 1、For example, the interface of router or switch violated the threshold of loss tolerance, then the alarm would show on the OPM. When we had solved the issue of interface, the alarm still appeared on the OPM. That made us confuse it is right to solve the issue. Of course, I also tried to refresh the status of the device on OPM and shorten the time of polling the devices and interfaces . How to refresh quickly on the alarm view of OPM? 2、Sometimes I found some interfaces
DHCP monitoring
Hi How can I monitoring my DHCP server, bad addresses and so on?
Monitoring load CPU in a virtual machine
Good afternoon. Has come up against such situation, the request to help to solve it: We have a server with two CPUs and 6 cores in each processor, a total of 12 cores obtained. On this server we have installed Hyper-V and install and start two virtual machines(Win2008 R2 Enterprise) with 4 CPUs on each virtual server (it is maximum for Hyper-V 2008 R2). We add Hyper-V server and two virtual servers Sindowse Server 2008 R2 in to OpManager v.9011. But once discovered that a class uses opmanager
Netapp interface traffic wrong
Hi, I have started a fresh installation of OP-manager with 8811. Adding NETAPP FAS 3020, and Cisco switch 4507, i have noticed that there is a big difference between the traffic reported on the port of the cisco switch versus the traffic reported on the netapp. Attached the comparison: I have added the port-channel and the port members traffic from the switch on the first page and the VIF and port members from netapp on the second page. On the third page I have added the print screens of the interface
64bit traffic counters are not working
Hi, I have an issue to monitor traffic on Windows server (2003/2008) and our NetApp storage. 32bit traffic counters are working, but all interfaces are 1Gb and counters can be overwritten. I.e. I need 64bit counters. I tryed to switch 32bit/64bit and vice versa, but it doesn't help. 64bit trafic counters are NA. Can you please help me to resolve this issue ? Thanks.
How to monitor Biztalk
Hi All, We are currently testing Biztalk server and would like to know if it is possible to monitor it via op manager? We would like to monitor the Orchestrations and applications as well as the server. Anyone doing this? Thanks
Next Page