Netfow plugin settings - change server settings
Hello, Running Opmgr 8721. Installed the Netflow Analyzer plug-in on the OPmanager server, than uninstalled because we have a separate Netflow server. When I try to add the new NA server, the Netflow settings screen keeps showing the IP address of the Opmanager server. Where is this information held so I can delete? This is the error I get when testing: Unable to establish connection to Netflow Server Thanks.
How to export the number of each server's error
How to export the number of each server's error report in opmanger by weekly?
NCM Decice Templates
I'm trying to import configurations from Cisco Access points. 1130AG 1252n I can add them if I do it 1 at a time but doing it that way there is no "Device Template Name" for either type of device. For vender I select: Cisco For Device Template Name: Cisco Aironet Access Point For Series I enter: 1130AG For Model I enter: Cisco Aironet 1130AG And it will add the device. If I try to add the device using the Import SNMP Device method the IP addresses for the access points are not listed. YES - All
ESX host in cluster not updating vm list
Hello, Running Opmgr 8721 with Vmware add-on. We have an ESX cluster with 3 nodes, 1 is currently in maintenance mode. Of the 2 that are active, 1of the hosts in Opmanager is not updating the list of virtual machines that it hosts. I have deleted (from the quick config wizard and removedbentriesnew), then re-added the host, but still the same issue. I will submit an email to support. Thanks.
OpManager data collection stopped Windows 2008 installation
Just add on to it, We have found one more issue,that is the OpManager suddenly stop monitoring the VM hosts which were configured earlier. But my Guest OS is still been monitored, again there also we have an issue.Even though snmp services is up and running on all the guest OS the OpManager is not able to resolve the snmp credentials and it's failing to monitor the CPU and Memory utilization. Don't know what is running behind but for sure we are facing a serious problem with these many issues having
Recent Alarms not clearing
I have the recent alarm widget configured on my overview page. I am running 8720. The recent alarms are not clearing after they are cleared on the devices that experienced the issue. Old alarms will stay in the "recent alarm" screen until manually cleared. Weve run Opmanager since version 7, but this issue is new with the latest upgrade.
Inventory Details
Hello All, I need to know whether it gives the system details like RAM size, HDD Size, Softwares installed, Software vendor and mainly System and Monitor Serial Numbers. Reagrds Sandeep
how can i make an availability report of all my switches devices?
Hi, i know i can make a report with one switch, that report show me availability this day, last week, lasth month, custom period, etc. but this is just for only device. i want to make a report with this features but including more devices in just one report. is that posible?? thanks for your help. regards
Problem with exchange monitoring
On the Transport section of Exchange monitoring I see that there's something strange: The Message Received Per seconds instead of reporting the number of messages per seconds grow at every refresh (I think he should report the "(current value - last value)/time interval". It's a windows 2008 machine with exchange 2007 sp2. Anyone have this problem ?
License migration
Hi! I would just like to ask about the license migration procedure. Namely, I am the OpManager administrator and I want to change my computer, so I also need to reinstall the OpManager. Also, is OpManager fully operative on Windows 7 x64?
Notification Profiles
The whole notification profile functionality needs a complete re-write. The "profile" should be based around the RULES that are applied to devices and not the MESSAGE that is sent/emailed as is currently the case. For example, I would want to create a profile or template for domain controllers that would monitor particular services and events. I would then save that profile and apply it to all my domain controllers. That RULES profile could then be associated with a message template similar to what
Migration to latest version
We're currently running version 7 of OpManager. We are looking to install the latest version (8.7) on a new machine, migrate over our existing settings to the new machine, and then decommission our old OpManager server. Is it possible to migrate settings?
Can OpManager support monitoring a folder and sending out files present via the notification system?
Can Opmanager be used to monitor a folder for the existence of small text files and then send out each one through its notification system? We have a variety of systems that generate short alarm text files (<200 chars) with a .alm extension that are placed in a known location on a server and then a notification system is needed that monitors this location and sends out any .alm files out to groups of operators via SMS or emails. We would also want to be able to send other extensions or predetermined
Syslog Report Problem
Dear All I have configure my Cisco 2811 router to send syslog messages to my OPM. in live syslog viwer i can see a syslog relating to FAN Failure problem on my router but when using Report==>Syslog Event , no event is shown, do u have any idea about such problem, how can i solve the problem? Regards
Monitoring IBM BLADE with OPM 8
Hello, How should i configured OPM to monitor IBM BLADE Center servers from ? Thanks.
Couldn't get lock for..
Hi all, Any idea why this happens when trying to restore? C:Program FilesManageEngineOpManager in ackup>RestoreDB.bat BackUp_NOV1_201 0_16_41_44_8721.zip ******************************************************** * Warning!!! Attempting to restore the data !!! * * This will result in loosing your current data!!! * * Press Ctl+c to quit the operation. * ******************************************************** Press any key to continue . . . java.io.IOException: Couldn't
SQL Monitoring in Premium Edition
I am failing to Monitor the SQL Service & parameters with 800410010 Specified Class is InValid Error while adding the SQL Paramters. I have executed wmiadap /f on w2k3 Enterprize Server .The Database in SQL 2008(32 Bit)
Opmanager 6.0 Java Problem
Dear Support we use opamanger v6.0 for a while. there are more than 250 cisco devices to monitor under OP v6.0 with last patch. We are running on window 2003 with 8 GB RAM. We try to run MapMaker for about 30 business view, the screen just hang and we have to STOP/Restart OP services everytime ? The Java.exe just running about 120MB of memory. How could I fix the problem: 1. We are running IE6 & IE 7 with same problem. 2. We are running on HP DL380 Server with only 32 MB video memory, Is that goging
Error on log when adding a new server to OpManager
It sayd "Added" but it doens´t show as a "server" and on the logs I have 18:17:41:396 PM com.adventnet.persistence.DataAccessException: [MANAGEDOBJECTID] Exception occured while inserting rows 18:17:41:396 PM at com.adventnet.persistence.DataAccess.createDataAccessException(DataAccess.java:2228) 18:17:41:396 PM at com.adventnet.persistence.DataAccess.insertRows(DataAccess.java:1874) 18:17:41:396 PM at com.adventnet.persistence.DataAccess.add(DataAccess.java:200) 18:17:41:396 PM at com.adventnet.me.opmanager.server.util.MODBUtil.addMODetails(MODBUtil.java:50)
Netscreen unnumbered Interfaces not shown.
Hi All, Hope someone can help me with the following problem; We have a variety of netscreen devices (5GT, ssg5, ssg20, ssg140's) annd setup as static route based site-to-site vpns. All VPN's are bound to independent unnumbered tunnel interfaces I can add the devices to OpManager perfectly and it gives me a nice tx rx overview of the physical interfaces. Unfortunately I couldnt figure out how to add the tunnel interfaces of each device in the "interface box" of the device "snapshot". By browsing through
Alert when Opmanager loses connectivity
Hello, Running Opmgr 8721. I saw this alert from last night: NULL OpManager has detected that it has lost network connectivity and has suspended all monitoring. Monitoring will be automatically resumed once connectivity is established. Can you have Opmanager send an email alert once it regains network connectivity? This would be very helpful. Thanks.
Has Anyone Had This ? OpMan - Mail Processing Failure ( Any Version )
Our Opman stopped sending mail alerts a week ago. We have a SMS alternative monitor running on a separate server watching Opman Server & Process and MailFlow path - There was no issue at the time (or since) with any of the dependant systems.. Namely ..... Opman itself Server on which OpMan runs Switches MailServer Intenet everything on the mailflow path was and is working fine - OpMan just stopped processing mails. As everything on the Mailflow Path was fine, the 2nd SMS monitoring system
Number of printers mismatch
Hi, I have 4 printers to monitor. In my Dashboard I see, that I have 4 printers. When I open the printers page, I only see 3 of them. When I switch to the list view then 4 are visible. I use build 8721 of OPManager Greetings Jürgen
Monitor Volume Mount Points 8721
Hello, Running Opmgr 8721 out of the box does not allow for monitoring VMP's, which we are heavy users of. We made the following changes to disk.vbs and disk_snapshot.vbs to enable Opmanager to monitor these: From: Set colItems = wbemServices.ExecQuery("Select * from Win32_LogicalDisk where DriveType=3",,48) To: Set colItems = wbemServices.ExecQuery("Select * from Win32_Volume where DriveType=3",,48) Update Dec 2010 - One caveat; XP does not support the Win32_volume class so I had to create a custom
Monitor Windows Shares - updated Folder.vbs for 8721
Hello, Out of the box, running Opmgr 8721 does not work in monitoring UNC shares. The attached, when renamed to folder.vbs works great.
Adding a WAN Monitor
I would like to work with the new IPSLA Wan Monitors but my version of OpManager Premium, Build 7027 does not have a WAN Monitor tab under the Network. Please see attached screenshot of Network Dashboard. Thank you, -Eric.
IP SLA support for multilayer switches
Does opmanager support polling ip sla that is implemented on switches? I see mention of routers in the documentation and just want to confirm whether or not opmanager requires a device type of router to configure this. Thanks
Change IP address of a device
Hi, I have in our Op Manager devices added using IP address (switches, routers, UPS, access points, routers, etc.). Some of these have no DNS record. I have changed the IP address of a switch. I have replicated the change in Op Manager and now i get the "Unable to fetch managed object details for the object: new IP address". How can i manage this change in Op Manager? I have seen that in version 6 the recomendation was to delete the device and added it back. This means losing all customization: i
Cisco ONS 15454 traps show as unsolicited
I am trying to monitor our Cisco ONS 15454. I am receiving the traps, but they are showing up as unsolicited. I have loaded the MIB's that came with our Cisco. Any advice?
Data missing in Dashboards
Data in the dashboard charts for Last N Hours are all not displaying data from Midnight of October 31 until the current time if they extend into October 31'st. I can edit any of the individual widgets to show only 6 hours and it will display data for the 6 hours, but if I do 12 hrs, the data in the chart stops at midnight. We have the widgets set for Last 24 hours and we are seeing nothing past Midnight. I can also view data with no issues if I view the report from the device. This just started
Dell Powerconnect Switches
Is there anyone out there that is using Dell Powerconnect switches and Op Manager? I have a Powerconnect 6248 Stack and 2 powerconnect 2848 switches and wouldl like to monitor them inside OP Manager. I currently have them discovered and SNMP is working correctly, but I would like to monitor some other things like CPU, Memory, Fans Power Supplies etc. Can anyone lend a hand? I cannot seem to get the hang of SNMP, MIBs and OIDs. It is very confusing, I downloaded the MIBs from Dell and they are in
Some of the Standard Widgets displaying "No Data Available"
[I changed the topic type to Problem, because it is a problem] OpManager 8721 Some of the standard widgets appearing on the snapshot page of my routers and switches are showing "No Data Available", even after several days. Those are mostly CPU Utilization, Memory Utilization, Temperature and Backplane Utilization. The various Performance Monitors are correctly delivering the data, which means that the SNMP access is essentially OK. Now, my specific question is the following: how do I find out what
Rogue ESX Host in "Virtual Devices"
We have a rogue ESX host and 11 VMs which we have been unable to remove. This is stopping any new ESX hosts from being picked up once added to Virtual Device. How do we remove this Host ? Thanks Jason
Creating Business views
Hi, I am trying to make a business view made up from about 40 devices. when I edit the business view, all devices appear in the squared area; upon saving, they all shift right - quite a lot. I don't fully understand the role of background image ( technically only ) - if i will will use a custom png file - like world.png ( but with increased size so that it will accommodate more devices ) - is that a valid scenario? it has obviously something to do with the image - but i don't want to screw anything
IBM AIX Query
Hi Team Is it possible to use any other Access to IBM AIX Servers for getting the CPU/Memory and DISK. We know that we have to use 'root' access but unfortunately, one of our customers - CIMB Bank has restrictions for using 'root' account in our OpManager tool. Is there any workaround or any other option, we can do to resolve this ? regards Isaac ME Tech
Disk Threshold Alerts not holding
Hello, Running Opmgr 8721 on a brand new server, started from scratch and installed 8721 and rediscovered all devices. I goto add a disk threshold limit to alert if under 1GB, hit ok, come back and edit the alert to check if the values are still there, and it's empty. All threshold alerts are gone for all servers, over 600! Please help, I have submitted an email to support with a screenshot. Thanks.
Sonicwall NSA 2400 interface stats
Hi, I'm running the free edition of OpManager and have tried monitoring my Sonicwall NSA 2400 but only some of the stats show on the dashboard. For example the interfaces tab on the snapshot shows NA for Rx/Tx/Errors but if I click on the real time button I can see the data streaming past just fine. There is also no data for CPU Utilization and Memory Utilization is streaming but constantly showing 0%. Do I need to adjust the configuration somewhere to get these stats? Regards Cameron
CREDENTIALS
Which is the function of credentials in OpManager and other ManageEngine applications?
Rearm
I have a question, when OpManager has an alert that automatically becomes Rearmed, then the alerts is automatically cleared but remain unassigned. Can you somehow get all automatic "rearms" to be Assigned as a "system" or similar? For as it is now, it does not look so good, when generating reports on alerts and you see a lot of alerts that has been cleared but no one has acknowledged them.
Problems whit opmanager v7
Hi. I have a problem in OpManager v7. When I add a host to win2000 server in the category of server detects it whitout Problems, only when the server goes down the OpManager does not detect that this down, always marked as up. On the server I have configured a community that used in OpManager. Add the same host as Desktop, it is detected and when it falls, this category Desktop if it shows how down and generates alerts as assigned. That may be happening? thanks
Next Page