Windows Evenlog monitoring
Hi all, There are many built-in "eventlog rule" in OpManager. I searched internet and found that for same event(e.g. new user account created), the event id in windows 2003 and 2008 are different. In OpManager, which windows version correspond with the default rule ? Best Regards, Simon Wong
No Custom Links Tab on Hyper V Host - OpManager Version 9
Hi We use the "Custom Links" tab on servers to add ILO links, management page links etc. This tabl is not available on VM Hosts? Is there any way around this? regards
Switch ports reporting trouble when link up or down
I know there has been a lot of talk regarding this topic but I am still having trouble finding how to do it. My switch ports report "trouble" when the port link goes up or down (IE. someone turns off their computer). for example: Interface 'Ethernet Interface-g19' is down. I still want to monitor that port for critical alerts like this one: Critical Dec 15,2011 12:56:23 PM Interface 'Ethernet Interface-g19' is shutdown. Is there a way to surrpress ONLY that trouble alert or reclassify it to something
Opmanager eventlog threshold
we have an issue where some pc's (already deployed) the security log will fill up. is there a way to set a threshold on this so that when it hits like 95% we can identify the pc , and take corrective actions thanks mike
use csv file to specify multiple ip ranges for device discovery
Is it possible to use a csv file to specify multiple ranges for device discovery? My network has multiple subnets with private ip address blocks. It would be great if I can record these ip address blocks in a csv file and automatically run device discovery for every block.
I lose the history of traffic . what can i do?
After i had recreated a route i lose the history of trrafic . what can i do?
log file monitoring
Hi, Our customer is asking if log file monitoring is now included on OpManager v9? According to our client they signup OpManager 9 beta program and they registered succesfully. And Dev Anand Product Manager – OpManager gave the links for the Log File Monitoring .exe and the video guide to our customer. http://www.youtube.com/watch?v=H_VojxLhSr0&feature=youtu.be Log file monitoring: Windows: http://bonitas.zohocorp.com/customer_uploads/2011_12_28_12_48_28_ManageEngine_OpManager.exe Our customer
machine types
Is there a way to see the machine type/os from the dashboard page of each machine, including CPU count, installed memory, etc? This would be a great feature.
Custom Script monitors in OpManager - Some examples, documentation needed
Hi all. I've been playing around with trying to port some Perl, bash scripts etc. from an old Nagios instance (Which by the way, seems to support custom scripting a heck of a lot better than OpManager from what I can see!) with the intention of decommissioning nagios eventually. So far however, I haven't gotten very far at all, as each time I try a custom script (Perl, PowerShell etc.) I seem to always get some obscure error of one kind or the other. Can you please provide some actual working examples
IP Routing Table
Hi There, We were always able to access the IP Routing Table for a router from Opmanager. In the last few releases including the new one this is not available any more. Is it a configuration problem on my side or has this feature dissapeared from Opmanager? Regards, Rudolf
Threshold Value issue on opmanager
We have added our wireless device on OpManager for monitoring in that we have set threshold value 90% to send alarm and re-alarm value as 85%, but I am getting alert for 30% for same interface Below are the snapshots. I have searched almost all the options but couldn’t find the settings, I am randomly getting similar alarms for few server’s , VM Device’s & Wireless Device’s. Please let me know the solution. Regards, Karthik
Dial graphs for cpu and memory utilization are not seen
Hi. I am using opmanager 9 build number 9010. i have added cisco 3560 catalyst switch and enabled snmp on the device. i can verify the snmp credential from device snapshot page. i also verified it from mibrowser.bat under RFC mib sysoid . to make sure i re added performance monitors to the device.but when i edit performance monitor and cilick test monitor. it says "The monitor did not respond to the test request ". Thanks.
Precision Air Conditioner monitoring.
Dear Team, Can we monitor temperature of Precision Air Conditioner of data center. Regards Abhishek
Timestamp different
Hi...Having some issues with the Timestamp for the alarms and other things in the system. Opmanager it self shows the correct format "20 Jan 2012, 14 : 48 : 32 CET" but the alarms shows "Jan 20,2012 02:43:55 PM" How can I change the alarm timestamp so it shows the 24 hour time insted of 12 hour?
API for IP Address Management
We are pleased to announce the availability of API for accessing the IP Address Manager data from OpUtils. This means you can programatically connect to the OpUtils database to fetch the details of your IP Space. The initial version will let you get the following details: Summary of all you Subnets Summary of a specific Subnet Details of all IP Addresses of a Subnet Details of a Specifc IP Address Details of a range of IP Addresses The information will be provided in an easy-to-interpret XML format.
Unable to Restore OPmanager backup
I have Operating OP manager over Windows XP (32 Bits), i have taken backup using data maintenance backup utility and try to restore on windows 2008 server so its generate some SQL error. Kindly find attached snap for understanding and help in this regards, Regards, Arshad Ahmed
Folder monitoring template for newly created folders
Is there a way to set up a Folder Monitoring Template when a new folder has been created on the C: drive?
OPManager
OPManager can generate a report with exact time the server/s down?
Installing OpManager 8.0 on ubuntu 10.10
Hello everyone how are you? I'm trying to install OpManager on Linux 8.0 Need help because when I run the script: StartOpManagerClient.sh nothing appears loading ... In fact none of the scripts run command to run I used was: root # /opt/AdventNet/ME/OpManager/bin/StartOpManager.sh two follow these procedures: http://www.debianadmin.com/monitoring-serversnetwork-devices-with-opmanager.html # more-356 http://www.manageengine.com/network-monitoring/installing_opmanager.html
SNMP Community Name Issue with '%' Symbol
Hi, I have a read-only SNMP community name for a Cisco router and it has a mixture of numbers, letters and symbols in it. OpManager is having a problem with the '%' symbol as it is excepted but then adds a '\' to the community obviously then stopping SNMP from working. I can't change the community name as it isn't managed by myself. Is there anyway around this issue? Thanks. Pete.
How to clear alarms automatically after processing them
Hi I have more than 100 devices in the opmanager 9, each time an alarm is generated, we get an email and one of us troubleshoot the issue and correct the situation. My question is how to configure and allow opmanager 9, after we correcte the situation, to double check that issue and clear that alarm. So, many serveurs restart ( after deploying windows patches, or for maintenance tasks), their alarms are never clear, we have to do it manually. Why the opmanager doesn't clear the alarm after
how to apply windows service monitor to multiple device
I need to monitor the same set of windows services on multiple windows servers. Do I need to manually setup each server one by one? Or is there a way to apply this to multiple windows server in one shot? I have a large number of servers. Therefore, manually change each one by one is problematic.
Question about the dell server temperature displays
Is it possible to change the label of the instance field to something like Ambient air or CPU instead of the .1.1 or .1.2? Also the monitor shows it in Tenths of a Degree Centigrade for example 434 instead of 43.4 C is there a way to put the . to limit confusion? I know that Dell OpenManage shows the temps as 43.4. Many years ago you use to be able to do custom graphs by adding the code to the xml file.
How to setup a notification profile for disk utilization profile
Hello, I have about 100 servers that I need to add an email alert for disk utilization thresholds. How can I apply a notification profile to all 100 servers without having to go through all of them? When I go to associate for the email notification profile, the only option for threshold is for all thresholds. Is there a way to do this in bulk so I dont have go through each device individually?
wrong information displayed
Hi, OPManager is generating false alarm of one solaris server. It is showing disk space is 100% but when we logged in to the system and manually checked the space we got following results:- Filesystem size used avail capacity Mounted on /dev/dsk/c1t0d0s0 39G 3.7G 35G 10% / /devices 0K 0K 0K 0% /devices ctfs 0K 0K 0K 0% /system/contract proc 0K 0K 0K 0% /proc mnttab
No graph CPU Utilization on the Linux Redhat
There is no graph CPU Utilization generated when monitoring. Both SNMP Agent from AdventNet and CLI failed the testing. When I test for Disk and Memory it also passed. What seem to be the problem. It cannot generate the necessary graph and data. Please help. thank you.. ffatullah
Problem with SSH Login towards Linux server
Hi What can I have wrong when I get failed on SSH login towrds Linux servers from OPmanager?
lsass.exe - CPU runing at 100%
Running Opmanger on a VM windows 2008 with 2 cpu with 8 GB RAM, still Opmanager is using the lsass.exe windows process at 100%. I think it has something to do with Opmanger is polling every x minutes because lsass.exe is the Local Security Autority. Anyone else?
Total page counts for monthly reports
Part of a maintenance contract we have on our printers requires a monthly report of total pages printed over the previous month. We cannot find a way to pull this information in an OpManager report. The SNMP polling is working and it is pulling page counts because we do see snapshots of pages printed throughout the day but no where can I find a way to pull total pages for the month or just total pages period and we can subtract from total of the previous month. Mainly using HP Laserjets.
Not recieving trap notification
Sir, I have set up NMS with Manage Engine and added remote switches, I'm able to access the memory and CPU utilizations and gets information about interface up down status. But Im not getting any messages or alarms when an interface goes down. I'm system admin and not a network specialist. I have tested with a switch having bpdu problems by putting it up and down. I dont get any messages indicating that. How to solve the issue This is the configuration I have done in that Switch snmp-server community
migrate device
Hello! Could you help me to migrate a device (or few devices) from one OpManager server to another on same domain? how to?
After successful adding, unable to find the device
Hello! I have the aforementioned problem. Here are the details: I want to add our switch with 192.168.10.2. I tried 3 separate ways to add, but all have failed. 1. Admin/Add Device - I clicked on the Admin/Add Device button. On the new page I added the IP, the netmask and the correct credentials to use (I checked it several times). - A new page appeared with the "Info: Device added successfully." phrase. - After this, I can't find this "successfully added" device. I tried also the Switches/Import
add url monitor to a device template
Hi, Is it possible to add a url monitor to a device template? Furthermore, I'd like to construct the url base on the device name. Is this possible? Thanks, James
Cisco ACE Module (Multi Context) and Opmanager
Do Anybody try to use Opmanager to monitor|get statistic info from ACE? Do I have to do to get a dedicated ACE template integrated into the next release?
how to migrate db to mssql.
HI team, I want to use mssql instead of mysql. I have installed mssql on the same server with opmanager. I am using opmanager db configuration browser. DB Host - localhost port - 1433 username and password are same which i have provided at the time of mssql installation. I am getting an error "hostname or port is incorrect". Please tell me steps to install mssql 2008 r2 for opmanager and also how to connect it with opmanager. Regards abhishek
Permission Denied While executing Workflow
I am trying to set up a workflow to copy the contents of one directory on serverA to a directory on serverB. I am using the copy file feature and the config looks like this: Destination Device: SeverA File name: F:\Design\Instructions\pdf\JATEST*.txt Destination Folder: D:\Inetpub\ftproot\assemblyinstructions info/Device = ServerB The error I am getting is: Error # while using local credential [No Login] - Permission denied I cant seem to find a place to populate the credentials for this
Custom WMI CPU Monitor
I've done this in the past without difficulty, but for some reason cannot get this to work now. I'm adding a custom WMI CPU monitor so I can have a 2nd threshold/condition on a device, and following the instructions per http://support.opmanager.com/sd/AddSolution.sd?solID=25802. I've added (copied from the default "CPU Utilization" Category) the below to my hostresource.xml file under the <POLL ID="Windows 2008 R2" section <CATEGORY ID="CPUCriticalUsage" command="cpu.vbs" description="Percentage
by mistake changed the opmanager port to 9090
HI, All by mistake i changed the opmanager port to 9090 from 80 to 9090, how to reconfigure opmanager port back to 80
Setting up WAN monitors
I've installed a Cisco ASA 5505. When I browse through the list of devices to label my router this particular router doesn't show up. Can I manually add it and if so how?
No information is displayed in cpu and disk utilization dials
Hello, We added few linux servers in opmanager and the devices are discovered successfully but no information is displayed in cpu and disk utilization dials. I used the mib browser and got the below result for the .1.3.6.1.2.1.25.3.3.1.2 oid Sent get request to 10.12.11.22 : 161 Request Failed: Get Response PDU received from 10.12.11.22 Error Indication in response: There is no such variable name in this mib. Errindex: 1 So do I have to edit snmpd.conf file in those servers? if yes, then what lines
Next Page