Out Traffic
Hello, I've been evaluating the Netflow Analyzer product for a couple days now.. Comaped to the other products in this catagories, your seems like a very good value. Anyway, I cannot get the application to display Outbound traffic on my interfaces. I read the FAQ and it says that I'd need to enable netflow on every interface traffic passes to get this info, but after doing this, I still do not see it. I am monitoring an edge router with 1 gigabit int and two POS's. I get inbound traffic on all of
Threshold Error!!!
hi, i got a problem about thresold setting... when i finish setting the CPU threshold and apply it. After that i edit the same threshold to see what value to set It's lost, i don't see any value i already set... can anybody tell me what wrong? :cry:
"Port numbers" for ESP_App?
Hi, What do the port numbers refer to when looking at ESP_App? Are they the SAs SPIs? thanks, alec
Netflow Analyzer
Right now, the analyzer collects export v5. Will the analyzer be able to collect export v8? If so, would that be an upgrade or a new version?
HP 4200 Printer
why cant i see one of my 4200 printers i have 51 printers and opmanager say the printer is already in database yet i cannot set it
Monitor processes on Linux
Is it possible to monitor a running process (daemon) on a Linux Server. I would like OpManager to notify me if the process stops. It would be great if it could also re-start the process/server. This would be something like the Windows Services Monitor. Thanks for your help John Ponting
Grouping Server IP addresses
I've installed the demo of OpManager, but can't figure out if I can do the following: Auto Discovery recognises computers with many IP addresses as being several different machines. Is it possible to associate these addresses or to create a 'container' to hold all these addresses so that the display shows one icon per machine?
Slow performance and "No results to display" mess
I've running NetFlow Analyzer for about four hours. Whenever I require a report such as TCP_App port , source, destination or conversation display it gets very slow often halted. Some times I get the "No results to display" message. I'm running it on a Penitum III 1GHz Dual processor, 1GB RAM HP Server, RedHat 8.0 . CPU load doesn't reach 30% utilization. Thanks, EBreton
Notification profiles not working
Hi, We setup the mail server settings and we can send a test email just fine, but when we setup notification profiles and assign the profile to certain devices/clients, they will NOT send an email out. Is there anyway to debug? We really like this product, but we can't even get past the testing of notification emails... ps..I also have my profile to monitor everything and we have a printer that is down, but no alert is being sent out. My profile is even assigned to the printer! I also looked at the
op manager is not differentiating Routers and desktops
op manager is not differentiating Routers and desktops.How can we configure it?
op manager is not differentiating Routers and desktops
op manager is not differentiating Routers ,Switches and desktops. How can we make it do that?
Notification Profile (more info?)
Hi Our OpManager checks a router and his interfaces. The router has a 2Mb line to Customs Belgium (Serial0/0:0) and Customs Holland (Serial0/0:1). When one of the two Serial interfaces is down we get a notification mail like this: Message: Serial0/0:0 is down Device: 172.31.1.4 - Router to Belgium and Holland Category: Router Error Condition: Trouble Generated at: Feb 23,2005 09:36:43 AM But in the weekends, when we get a notification mail, for example at 4.00 AM, it is not always possible to know
Partition information SNMP %
Hi i just recently compiled snmp -ucd version, and I got the cpu , memory, disk utilization working, but when I attempt to add the snmp disk partition utilization, it is failing. How can I get it to work properly. The community string is correct because the cpu , memory and disk utilization functionality works. But it fails when I add the disk partition % snmp monitor. ryoon@ipowerweb.com
Support for SNMPv3
Wonder if snmpv3 will be fully supported with auth and priv passwords. Im evaluating the trial-version and some softwares from other comanies. Opmanager is nice but i want to use snmp v3. /John
Event lo rules
Hi I have a problem the event logs rules It works with windows 2k3 but not with Windows 2k and NT. There is the same configuration on all of them . thans
Additional report types?
Our "campus" is comprised of five undergraduate and two graduate institutions. The "campus" has its own class B address and that IP space is divided among the various institutions. The cost of the internet connection is divided based on the amount of traffic each institution does. What I need to be able to do is to generate a report for a specific network range to get a "total" traffic in/out for that institution. The custom report gets part way there in that it I can specify a network range, but
Trouble starting op-manager
Hello, I am in the process of evaluating the free version of OP-Manager. I installed Op-manager as per the instruction. Then i used the StartOpManagerServer.sh I also made sure that i do a a+g access control. Neither my web-client nor my regular client using StartOpManagerClient.sh seem to work. Web-Client: It does not go beyond giving me the login window, then it takes me to discovery wizard and then once i click finish, it takes me back to login window. StartOpClient method: When i run this, it
Win2k3 - interface monitoring
every things works great, but i cant really monitoring the traffic of the netword devices... smnp should be correctly configured and Adminstrator - Login is also set! What i have to do to monitor the network interfaces?
Monitoring Cisco temperature
Hi, I'm trying to monitor the intake temperature on my Cisco 3845 routers. I'm using the inbuilt vendor-specific monitor to do this, and it's querying the following OID: .1.3.6.1.4.1.9.9.13.1.3.1.3.1 I can query this with the MIB browser (I have CISCO-ENVMON-MIB loaded), and I can even graph it with MRTG. However, there are no graphs in OpManager! When I open the graph window, it just says "NA" - nothing else! Hope you can help, alec
URL and Web server
Hi, We are still busy to test OpManager and our last day is coming......... We monitor Web Servers. Good But all of our web services ( URL ) refers to a virtual IP address. With this and a auto-discover, we monitor each URL separately. If the physical server goes down, we have X servers which go down... But, we can, with a server monitored, add an url to check. Like that, If the server goes down, all URL aren't monitored anymore. With the first method ( auto-discover ) we can add all URL servers
Authentication Errors in Build 5504
I am experiencing this same Authentication Error issue in the latest build (5504), that was discussed in a thread earlier (and was fixed using AdventNet_ManageEngine_OpManager_5_SP-0_6_2.ppm ). The behaviour and test results are exactly the same ... it behaves like the SNMP community string 'public' is hard wired into the code somewhere. Any suggestions ... what has changed about connection to the MySQL database from the earlier release, I am no longer able to connect as previously, would you provide
Dual CPU Support
Hi , I need to know whether Adventnet OpManager Release 5 supports more than one processors in a single server.Because I am getting alarm like CPU utilization is 100% everyday. Regards , V.Gunasekar.
Can default graph be changed to line from area?
I would much prefer the default graph behaviour to be line instead of area graphs. Any way to change this? Thanks
Alarm on SNMP Get Failure
I have some unix servers running a custom application. They also have a custom snmp agent running locally on the machine. My problem is that if the agent is not running, OpManager shows the status as green although it may be having an issue. Is it possible that in a future release, you can configure OpManager to alarm if an snmp get fails? Thanks, Jeremy
False Threshold Notification
I am getting a threshold rule violation for lack of free disk space. When I go and check the resource threshold rules for the device in question, I don't have the threshold specified that opmanager is squaking about. This is really annoying, any ideas?
OpMnager error on startup and missing interface data
Hi folks, I have recently install OpManager 5.5 build 5504 on Fedora Core 3 (Personal Desktop installation) to monitor couple devices included one Cisco 2621 IOS ver 12.0. First, the OpManager will not start as service according to the note form this forum and the file attached. It shows error message "execvp no such file or directory" when Starting OpManager service. I only can start the OpManager when login as root and run StartServer.sh script and then leave the session open. Second,OpManager
NetFlow Analyser and OpManager on the same box?
Hi, I've got eval copies of NetFlow Analyzer and OpManager running on the same box. I note that they both have their own copies of MySQL running to log data. - Can they be configured to use a single instance of MySQL? - I guess you're using MySQL for cross-platform compatibility? It's a long shot, but would it be possible to use a different SQL backend like SQL Server? - You can tweak OpManager to discard data once it's past a certain age. Can you do the same thing with NetFlow Analyzer? many thanks,
Install Error unpacking JAR files
From what we've been able to see, this could be a really great app. However, we're having problems getting it to install completely. We get to the "Unpacking JAR files" part of the install, which takes quite a long time, but it eventually fails with a critical error that backs out of the install and uninstalls everything. However, being that we're used to Windows apps that don't install themselves correctly, we noticed that if we kill the install process when the error comes up then the uninstall
slow reporting
I've been running NetFlow Analyzer for about 9 hrs now and I'm noticing a big slow down in getting a report result, for example, when I click on "TCp_App" in a "last hour" report for an interface. In one case, it took 37 minutes to get the result displayed. The router that is providing the NetFlow data is very busy as we have 5000+ students, etc. Is there a way to speed this up? Is this a memory allocation issue with mySQL? I really like the product but waiting 30 minutes for a report is a bit much.
WMI
Is it possible to use event log rules with W2K It's good with W2K3 ,no problem but nothing with W2k I have the same admin account The rpc and wmi service are running but nothing on W2K
Step by step instructions for adding and testing SNMP mibs a
Ok, somehow my post into the snmp group got missed so I had to demo this software to my network team without the ability of knowing if chassis snmp alarms really worked or not. We are planning to purchase your software here in the next couple of weeks, but before I cut a PO I would like some step by step instructions on adding and testing 3rd party mibs. ie from Cisco, Extreme, Dell etc. not just adding them into the mib folder but also how to test the snmp alarms from a cisco catalyst 6513, or 6509
Netflow - not working with 4500 sup 4 w/ netflow card
Ok, I got my 4500 configured for netflow and I can see by issuing a "Show Ip flow export" that it is sending to the computer with Netflow Analyzer. I never get a listing for the router at all... If I switch the router from version 5 netflow to version 1, I'll get a warning in the dashboard that it is receiving ver 1 packets, but if I switch it back to ver 5, I get nothing. Any clues? FYI - On the 4500 w/ net flow, there is only a "global" way to enable netflow in that, all interfaces are enabled.
opmanager 5.5 [sshd <defunct>]
Hi, When i enter ps -ax there is a lot and i say a lot of sshd: user [priv] [sshd <defunct>] active on a linux HR3 server that being monitor with ssh. anyone come across this and can you stop it Thanks Kevin
Operationally down
OpManager 5.5 discovered the swith successfully using SNMP, but the interfaces status in the switch shows operationally down even though the Interface is up. Where as i am able to see the Interface up in the Port Mapper.[list=]
OpManager New Release (Build 5504) Notification
Hi All, We are pleased to announce the availability of the latest update (Build 5504) to the OpManager version 5.5. The latest version of the product can be downloaded from the below url: http://www.opmanager.com/download.html Existing OpManager 5.0 customers can use a service pack to upgrade to this version. Users who are already with OpManager 5.5 but have earlier build versions (Build 5501 to 5503) can use a hotfix to upgrade to the latest. Please visit the following url to download the service
Monitoring different Volumes
If a server has multiple volumes (c:/, D:/, F:/) How do you monitor them with OPmanager? Particularly Disk Utilization, Free GB, Used GB. Thanks.
Showing dropped packets?
Hi, I'm exporting data from a Cisco 2621XM to a demo version of Netflow Analyser 4. Everything seems to be working well. However, I was looking at an application report, and UDP_App was listed. Drilling down to see which ports were involved, I saw this: SrcIP:SrcPort DestIp:DestPort a.b.c.d:51423 w.x.y.z:1026 Looking in my router logfiles, I saw that this flow was actually dropped by an ACL. So: - Is it usual for packets dropped by ACLs to appear in the Analyser? - I only investigated this in any
Machine names
Sometimes when I add a new device, usually linux, the device name shows up as the IP address and not the system name. It would not be a big deal to just change it except that the notification are sent with the ip and not the device name, and I have over 200 servers. Is there a fix for this? Doug
Opmanager can't find device with telnet port open
Hi all, I need your help How to scan network but the Router i want to scan can't be ping but port telnet is open but opmanager can't not find the device but i can telnet that device. I already delete the device and Use Discover -> Add New Network option to add the network. but the problem not solve Thx four your help
Stopping of alert mails
Hi to all of you, Opmanager is running on solaris machine. I want to stop alerting feedback. I am getting regular alert mails from opmanager . What command should i give to get this done?.. I am in help. Please do provide me. Thanks in advance, Deepti
Next Page