Use remote office for OS deployment only
I've setup a remote office in Desktop Central and I have added a distribution server to that office. However, I only want to use this distribution server for imaging purposes only and not for any other reason. Is this possible? It appears that when I
Lenovo ThinkBook 15 G2 imaging
I'm attempting to image a Lenovo ThinkBook 15 G2 laptop. It appears Lenovo has Full Disk Encryption (FDE) on by default and I cannot find a way to disable it. Mone on FDE here: https://support.lenovo.com/us/en/solutions/ht002240-full-disk-encryption-hard-disk-drive-frequently-asked-questions
Replicate image in Remote office to Local office or Central Server
We're using OSDeployer with our Local/Central Server and one Remote office. I'm in the remote office and I created an image that now resides only in the local office. Unless I'm missing something replication policy seem to only go from the central server
Bootable Media
I am trying to demo the software for a POC and everything was going as expected until it came time to create the bootable media. Everything seemed to work fine but the laptop would always say it could not find the network driver. I took great care to
Image creation interrupted
Image creation interrupted - \\NETWORK PATH - The specified network name is no longer available. When I click on the "View Log" link I get "Page cannot be found" The image creation gets to 98% each time and stops.
Error Deploy OS
Hi Afther Start Deploy OS Error OSDA.exe Spplication Error The instruction at 0x96714617 reference memory at 0xfffffdf0.the memory coild not be read Click on OK to terminat
Failed Deploy OS Exit Application
Hi My Log on OSDA Afther Deploy Template Exit and get to cmd Command [2021-07-12 16:44:47.032700] [0x00000278] [info] : Error : Unable to get registry value 200 [2021-07-12 16:44:47.032700] [0x00000278] [info] : [LogWrapper.cpp : 1006]>OS_Manager::CAccessLog::IsFileExist()The
Not enough storage for imaging?
USB Boot media... When I try to create an image it shows not enought storage on the repository.... Real free space on server is 236GB, If I uncheck WINRETOOLS & DELLSUPPORT partitions it works (I assume beacuse total image is around 2GB smaller) but ¿It
Memory Leak in ImageReplicator.exe
We run Desktop Central with the imaging component. We have about 14 branch locations with a distribution server in each location. We have been receiving periodic memory alerts from the distribution servers. When I log into the distribution server,
Bad system config info
Hi, I'm testing the OS Deployment in DC. I created an offline Image (with USB Media) of a a Dell Precision T1650. After I deploy the img on an Dell Precision T1700 I got an BSOD error if the system boot up: BAD SYSTEM CONFIG INFO Both systems are on UEFI and have the same SSD (Samsung 860PRO) installed. Windows repair can't repair the error. Any idea why I get this error and how can I solve it? thx, Bye, Clou
Hiddent NTFS showing up as bootable drive when imaging
Hello after I image a machine with OS Deployer it appears to be leaving the Hiddent NTFS drive as another boot option. This causes an issue because on reboot it wants me to select which system to boot from. One of the partitions boots nothing and upon
Installing a different edition of Windows 10
I have 50 computers that have Windows 10 Pro on it and I want to re-install with Windows 10 Enterprise LTSC. I would ideally like to use a template so that I can install with different applications etc. I don't want to have to PXE boot these machines and touch each one of them. I want this done all remotely. Is there no solution for this?
OS Deployment Remote
I have Replicated my image to Remote Office, and they appear in the Remote Office Image Repository. However when trying to Create a Deployment Template it does not allow me to select the image from that Remote Office Share. When I select the drop down, only the Images on the Local Office share appear.
Remote Access Plus for remote work
Due to the recent outbreak of COVID-19, most global enterprises are adopting work from home policies. Organizations may extend their remote work operations well into the future to keep their employees safe. This is the new normal for IT administrators, who now have to work around the clock to monitor all of their enterprise’s endpoints remotely. The go-to solution for IT technicians is ManageEngine Remote Access Plus, which can help you adapt to remote work culture. Benefits of having this remote
Remote Office PXE Media issues
I have 1 remote office that will not publish the PXE media, error: Unable to publish PXE media files - Network error occurred HTTP error code <404> There are no communication issues with the server hosting the remote office this is fully reachable from
OS DEPLOYMENT not adding computer to Active Directory W10v1909
I been using OS Deployment for nearly a year. As of recent I upgraded a PC with Windows 10 v1909. I went to deploy that image and it can no longer add the computer to the domain. It get's stuck on Post Deployment task. See screenshot. I even created a
Installing Office 2016 post OS deployment
Hi. I have Office 2016 added as an application to install following the Deployment of the OS, however it's not installing. The DC team are being less than helpful- just advising that the command is wrong, which it's not as I've ran it on the PC itself
OS Deployer Desktop Central Push Deployments
The one item that keeps our group from using OS Deployer is the inability to push deployments via agent to a workstation. We currently have this capability with Smartdeploy and it is a God send when it comes to mass deployments without having to have people sitting in front of workstations. Are there currently any plans to add push deployment via agent to OS Deployer?
Introducing brand new OS Deployer!
Dear all, We are happy to inform you that we have introduced a brand new OS Deployer with a more friendly user interface, fresh features and advanced techniques. You can refer our website for more details on this - https://www.manageengine.com/products/os-deployer/ Useful Resources: Userguide - https://www.manageengine.com/products/os-deployer/help/ How-tos - https://www.manageengine.com/products/os-deployer/how-to.html Knowledge bases - https://www.manageengine.com/products/os-deployer/knowledge-base.html
[Free Seminar] Secure your organization's endpoints against the latest cyberattacks and security vulnerabilities
Be it WannaCry, Meltdown, Spectre or Petya each year bears witness to new cyberattacks and security vulnerabilities, and the year 2019 is no different. From the BlueKeep vulnerability that affects over a million systems, to the ZombieLoad attack that affects nearly every Intel chip since 2011, IT teams across the globe face an uphill battle this year to secure their organization's desktops and mobile devices. Organizations irrespective of the industry they cater to, are often caught unawares by
Automatic device name selection
Hi, I have a question about deploying an os to muliple systems. I would like to use the computer detail settings list in my deployment template to check if a mac address already has an assigned device name. If the mac address is not in that list, i want desktopcentral to deploy the system with a new name, lets say DTCFR{001}. Am i correct dat if i have the computer detail setting list selected, and i also filled in a name in 'Target computer name', that it will first check the list, and if that's
Clear history and web site date on iPad remotely
We use iPads is a primary school. is there a way of clearing history and web site date on iPad remotely at once or on exit? also some way to delete all photos stored on the device?
Launching Vulnerability Manager Plus: Hunt down security loopholes with 100% precision
Amp up your endpoint security game with ManageEngine's all-new Vulnerability Manager Plus. Pinpoint, prioritize, and eliminate vulnerabilities with ease. With Vulnerability Manager Plus' 360-degree visibility, you can eliminate blind spots, uncover exposed areas of your network, and seal security loopholes before they lead to a breach. Vulnerability Manager Plus delivers the threat intelligence necessary to predict real risks from a plethora of vulnerabilities, and acts as a strategic partner in
Join us for an Endpoint Security seminar this November!
2018 is coming to an end but the fight against this year's cyberthreats is far from over. ManageEngine brings you an Endpoint Security and Management seminar where you'll have a chance to work with product experts on formulating a plan to protect your endpoints from different malware, including ransomware. Join us at any of our one-day complimentary seminars in Mumbai and Bangalore and show these threats who's boss! Register now to save your spot! What's in it for you? Discover the top cybersecurity
Join us for complimentary Endpoint Security seminars this August!
We're halfway through 2018 but the fight against this year's cyberthreats is far from over. ManageEngine brings you an Endpoint Security and Management seminar where you'll have a chance to work with product experts on formulating a plan to protect your endpoints from different malware, including ransomware. Join us at any of our one-day complimentary seminars in Boston, Philadelphia, and Toronto, and show these threats who's boss! Register now to save your spot! What's in it for you? Discover
Boot from Network via PXE
Hi ALL! I have: - OSD as part of ME DesktopCentral - DHCP Server (MS Sever 2012) How i can boot my new PC via network|PXE for setup my images for this PC ?? I tried use DHCP option 66 (used ME DesktopCentral Server IP ) - no way (( HELP
OSDeployer step-by-step
What is the best way to go about building a golden image? I want to make sure I do this correctly but I don't see any guides on what best practice is for the agent installation after the image has been deployed. So here a couple questions: 1. Do you install the DesktopCentral agent to the Windows 10 image then capture it for deploying it later? 2. Can the agent be installed using the post deployment application install template?
Cannot edit or delete a "Target computer(s) domain)"
How can I edit or delete a "Target computer(s) domain)", i can only find the option "Add Domain" in Desktop Central, OS Deployment, Deployment templates?
Edit or delete "Target computer(s) domain)" in deployment templates
How can I edit or delete a "Target computer(s) domain)", i can only find the option "Add Domain" in Desktop Central, OS Deployment, Deployment templates?
ManageEngine Desktop Central introduces an all new OS imaging and deployment add-on
Greetings from ManageEngine Desktop Central! Great news for Desktop Central users! We are glad to inform you about the newest arrival to Desktop Central family, an all-new OS imaging and deployment add-on to help administrators automate OS imaging and deployment tasks from Desktop Central console. With this new feature release, Desktop Central will now serve as a one-stop solution for complete PC lifecycle management, supporting all tasks from provisioning of OS, managing the desktops to retiring
Surface Pro 4 v. OS Deployer
Anybody know how to get Surface Book Pro 4s to boot PXE (and get to my OSDeployer server) when I keep getting the following: >> Start PXE over IPv4. Station IP address is xx.xx.xx.xx Server IP address is xx.xx.xx.xx NBP filename is bootwiz.bin NBP filesize is 26624 Bytes Downloading NBP file... NBP file downloaded successfully. >> Start PXE over IPv6. When I disable IPv6, I get the IPv4 prompts above, however the Surface goes straight into Windows 10 ultimately bypassing PXE. I'm researching the
ME OS Deployer Support Questions
We currently use several other products from ME, but OS Deployer seems to be the least focused on for updates and documentation and features. Maybe the community can help me out. Where on the ME website can you find the current build number of OS Deployer? Where can I find the current supported nic drivers for the OS Deployer Agent? Why cant I inject drivers like other OS deployment software? Since most of this product is Acronis, do i gain anything with ME OS Deployer vs Acronis? Is there actual
Cannot deploy an image to a Dell XPS 15 (9560)
I am having trouble deploying an image to an XPS 15 9560 BIOS 1.2.4 HDD: m.2 PCIe SSD-0 Using OS Deployer 5.0.3.136 I was able to successfully create an image from the laptop, but when I deployed the same image back to it using the bootable USB and running the agent, it blew away all of the partitions and volumes and the machine was unable to boot to a hard drive. Options used for deployment task: Set to deploy to default disk Set to erase target disk data and occupy disk space entirely I have since
5 tips for seamless endpoint security
Hey there, Are you worried about your endpoints being hacked or breached? Here is a simple tips to build the best endpoint security in your enterprise. Building an effective endpoint security has become all time priority for enterprises. With the amount of cyber attacks evolving day by day, enterprises have to practice certain simple best practices to keep them vigilant against any unforeseen vulnerability breaches. Read more: https://goo.gl/taAmSB
OS Deploy to HP Prodesk G4 really slow
Usually our images are installed within a few minutes but our latest batch of HP PC's (Prodesk G4 SFF) are taking around 6 hours to build. BIOS etc look ok and NIC is connecting at 1Gb, anyone else use these PC's and have similar issues?
Patch Tuesday: November 2017 udpates
Hi there, Patch Tuesday is back again with 53 security vulnerabilities this time. As usual, Microsoft has released updates for its various products. We strongly recommend patching all these latest security patches right away to avoid unnecessary security breaches, while installing the non-security patches at your discretion. Read more: https://goo.gl/F3EW6Q
Register now for Free Webinar: How to prevent cyber attacks?
Tackling cyber attacks has become a high priority in recent days, your organisation needs to adopt a proactive approach to protect itself from malicious attacks and arm your IT security team with the right tools to handle such threats. Register Now Attend ManageEngine's free webinar and learn how to Adopt a proactive approach to cybersecurity Detect vulnerabilities and keep your systems up-to-date Keep your organisation secure with seamless patch management procedures Register Now for this free webinar
Os Deployer ManageEngine Remote Agent Service keeps crashing
Hello I've installed OS deployer to windows 2016. When I restart my windows 2016 machine then I can make one deployment without any problems and if I want to make a restart or start a another deployment then The computer to what I wish to deploy OS goes to this state(see the attachment) And doesn't go further anymore. Also I cannot stop ManageEngine Remote Agent Service then, without killing it. If I kill it and then start it again, then it is all good for 1 deployment again and then the problem
Buy Driver's License, Passport, ((wottenkelly79@gmail.com)) ((whatsapp +237679499813)))id card,Birth Certificate and Other Documents ((wottenkelly79@gmail.com))))
Buy Driver's License, Passport, ((wottenkelly79@gmail.com)) ((whatsapp +237679499813)))id card,Birth Certificate and Other Documents ((wottenkelly79@gmail.com)))) We offer driving license, ID cards, Passports, Visas, marriage certificates, baptism cards, diplomas of all kinds for sale , Obtain Registered Ielts,Toefl & Gre Certificat((wottenkelly79@gmail.com)))) We produce high quality genuine passports, driving license, ID card .Database registered and unregistered. All documents are registered
Free e-book: Six best practices for escaping ransomware
Hi IT pros, Take a break from your routine for a while, grab a cup of coffee and read our free ebook. Security experts argue that organizations can proactively avoid cyber threats by understanding the types of ransomware attacks, their workflows, motives, and effects. We couldn't agree more. That's why we've created an e-book all about ransomware basics. Download our free e-book to learn about the scope of each type of ransomware and how you can avoid future threats by employing a few security
Next Page