Windows 10 ADK support?
I am creating a WinPE 10 image to use with Optiplex 7050's and am noticing that when creating the image the Windows 8.1 ADK is being used instead of the Windows 10 ADK (I selected the wim file in the Windows 10 ADK when creating the media). I attached some screenshots of when the media is being created and when it is being uploaded. We are using OS Deployer version 5.0.3,136
Force PXE Server to answer special MACs only
Hi, According to this Thread https://resources.manageengine.com/topic/os-deployer-pxe-boot-question it seems, that I can not prevent the PXE Server to deliver the PE bootimage to other Systems. Configuring the PXE-Server to autoboot Windows is no solution. I want to control when a System is starting normally to Windows and alternatively when it is starting to an automated deployment with a preselected Image. Is this possible with OS Deployer? or Can I simply configure somewhere to which MAC addresses
''specified number of machines have not become ready''
Hallo, Manual deployment is not finished by the specified time and fails with error: Error code: 268 Module: 100 LineInfo: 57E3187990610193 Fields: $module : "osd_server_vs_1366" Message: Session 'Deployment_template_title' has been stopped because the specified number of machines have not become ready. I have found here that the problem is in the product, and they have fixed it in update. https://kb.acronis.com/content/49730 The question is how can I use this update in OS Deployer? PS: I'm
Mobile Device Manager Plus - Free Training
Join us on 26th April 2017 and 3rd May 2017 at 11:30 EDT for a free training session on ManageEngine's mobile device management solution - Mobile Device Manager Plus! Following topics will be covered on 26th April: Device Enrollment and Provisioning: Manage devices by enrolling it via various enrollment methods Regulate devices by pre-configuring policies Audit your organization asset data Following topics will be covered on 3rd May: App Management and Device Security: Silent installation of business
Not able to Deploy Win-10 OS in Lenovo laptop.
HI Team, We are planing for upgrading our infrastructure, from Win-7 to Win-10, but unfortunately we are unable to install Win-10 through OS Deployer on machine, as its getting failed while deployment. we try to troubleshoot using error code which was generated in deployment logs. Also we check same on X240 Laptop, but there is no luck. Event code: 0x00340001+0x00330004 Error Code-4 I tried to troubleshoot with this error code. search for Acronis Support, but i didn't found anything
Free e-book: Managing and Securing Mobile Devices for Dummies
To help you keep up with advancing mobile technology, while protecting corporate data and assets, ManageEngine gives you a definitive direction in the latest ebook on Managing and Securing Mobile Devices. Click here to get your free copy now!
End Point Management Seminar - 21st Feb 2017, London
ManageEngine is hosting a seminar on End Point Management in London on Tuesday, 21st February 2017. Few of the topics that would be covered here are : Mobile Device Management, Patch Management, OS Deployment, Software Deployment, Asset Management, Remote Control and much more! You can register for the event here - http://bit.ly/2k6j6Yn
Unable to Deploy Image on Lenovo X230 Laptop
Hello Team, We recently upgraded our OSD server in to 5.0.3, 136, But unfortunately we are unable to deploy image on Lenovo X 230 laptop, also some X series laptop. Its just start & failed appeared in deployment task. Kindly suggest to narrow down this issue.
Booting to Agent Takes a Long Time
Recently I got our PXE server working and was doing testing in our environment. We found very quickly that booting into the Agent often took five minutes or more to get to a point where we could start taking or deploying an image. The screen we get stuck on is the one where it says "Reading all physical volumes. This may take a while..." To me 5+ minutes is way too long considering taking an image off of a base machine only takes 5-10 mins. Is there a way to speed this up? Perhaps its something in
Dell E7470 Nic Interface Not Found
We are Deploying OSD version 5.0.3.124 , deploying Win 7 X64 image , When we do PXE boot we see ME page , but we are not able to see the Nic Card . Any way i can plug in the driver and see the nic card. Thanks
Resizing is unavailable.
I am unable to deploy a Windows 10 image with three partitions, in 5.0.3,124 I receive this error: Host '10.16.102.64' has failed the deployment. Additional info: -------------------- Error code: 1 Module: 52 LineInfo: 6934824D6BD2F69E Fields: $module : "osd_server_vs_3124" Message: Host '10.16.102.64' has failed the deployment. -------------------- Error code: 15 Module: 51 LineInfo: E3394061D0E3A517 Fields: $module : "osd_server_vs_3124" Message: Failed to assign volume '2'. --------------------
NIC drivers problems
Dear, I'm trying to deploy a image to a Dell Optilplex 7040. Osdeploy doesn't recognize the nic driver. Please advise on how to continue. Can i put the drivers somewhere on the server or is there a other possibility?
PE Builder USB drive corrupt
When I use PE Builder to make a USB bootable drive for the OS Deployer Agent, it loads up DISM and Diskpart as part of its processes, and seems to successfully copy files, but the resulting drive is not formatted, it appears as RAW and is not bootable. This happened on two different machines, both with the Microsoft PE toolkits installed and working. Partitioning/formatting the disks before building the PE makes no difference. I am able to create .iso files using the same buolder with no problems.
Imaging & OS Provisioning - Free training
What could makes us feel better, than answering your needs. Based on many requests from customers, we have introduced free training on Imaging and OS Provisioning. You can feel free to join us, in the training program and get more insights on the product. It is time for you, to explore the hidden tips and tricks. This training is scheduled on Sep 28th . The training will be conducted in 2 different time zones 11:30 EDT & 06:30 GMT. Here is the agenda of the training program. Provisioning OS for
Upload PE Image to PXE
Every time I try to upload an image to PXE I get error like the attached photo. I saw in previous post to uninstall and reinstall the Manage Engine PXE server I did that, and still nothing works. I uploaded the WIM I am trying to use to the same drive on the Server as the OS Deployer is installed in but still unable to get this thing to work properly
Unable to save image to external device
Hi We recently purchased OS Deployer 5 (5.0.3,117) but have been encountering issues when saving an image to external USB hard drive. We have tried two external devices, both 2/3 TB and unused. The external hard drives were recognised when connected to a PC but when we attempt to save an image to the device, OS Deployer doesn't see the device and is unable to save the image. The external hard drives can then no longer be used as they are not recognized devices regardless of which PC they are connected
OS Deployer now supports Windows 10
Hi Folks, Greetings from OS Deployer!!! We are glad to let you know that we have updated to the new version of OS Deployer (OSD 5.0.3,124) on our website. We take this opportunity to thank all our customers and users for their feedback and continuous support. Highlights of New update Supports deployment of Windows 10 OS Now get updated for free and kick start your deployment across Windows 10 machines. Full Download: https://www.manageengine.com/products/os-deployer/download.html Product website: https://www.manageengine.com/products/os-deployer/
Unable to deploy image
Receiving below message in error logs: Host '192.168.1.203' has failed the deployment. Additional info: -------------------- Error code: 1 Module: 52 LineInfo: 6934824D6BD2F69E Fields: $module : "osd_server_vs_3117" Message: Host '192.168.1.203' has failed the deployment. -------------------- Error code: 15 Module: 51 LineInfo: E3394061D0E3A4BA Fields: $module : "osd_server_vs_3117" Message: Failed to assign volume '0'. -------------------- Error code: 8 Module: 7 LineInfo: 7937E52EAD24372E Fields:
Creating a Master Image/OS Deployer 5-Input/Output Error
Hello All, I have an error popping up whenever I create a Master Image over my network. I can't find much on this on google, what I did find didn't resolve anything. I pixie boot the computer, select the master image creator option, and go through the steps (what will be included in the image-system reserve etc, the networked computer the image will be saved to, etc). I then start the process, usually takes about 20-30 minutes, but at the end the error pops up (image attached). Now, we've never
Move License to anothere PC
In case a computer is loss, damaged, stolen, or decommissioned, will I be able to transfer a machine license to another machine?
New drivers update for OS Deployer
Hi Folks, Here is a quick procedure to update the files on the OS Deployer server so that the OSD boot Agent can support the latest drivers, especially Ethernet/Network card. You need to download and decompress 'bootwiz.sys, kernel.dat and ramdisk.dat' files from the following archives (ZIP files) to update OSD Bootable media and PXE Server. Update the OSDDemon folder Download the below given zip http://bonitas.zohocorp.com/desktopcentral/24Jun2010/OSD_Agent.zip Now replace 'kernel.dat' and 'ramdisk.dat'
HP Thin Clients
Hello We have a large number of HP Thin clients running XP embedded and Windows 7 embedded. These act just like a normal Windows machine but on limited hardware. Would OS deployer support imaging to thin clients?
Considering OS Deployer 5
We're considering OS Deployer, but need to know? 1) Is there support for Windows 10 2) It looks like OS Deployer is leveraging Acronis's Snap Deploy technology? If so, what makes OS Deployer better than the native tool?
Connection to PXE ser has failed
When I try to deploy to a machine that is connected to OS Deployer console I get "Error code: 0x230011 $modeule = "patcher_remote_vs_3117 Tag: 09x1B14BB824510300. Can someone help me with this.?
OS Deployer Booting to USB drive
Is there a way to get OSdeployer to boot to a USB drive instead of CD rom? also where can I find the BOOT.sys files
unable to deploy image
I installed the Os Deployer software on a server which went fine. I have managed to create an image from a computer. When I want to deploy that image on a new hard drive to a similar computer it will not work. I can boot the computer via PXE boot and boot into the deployer agent but then it gets troublesome, I get the following errors Bericht - 1 (0x340001) : host 'ip adress' failed to deploy - 13 (0x33000D) : operation was cancelled - 3,407,876 (0x740004) : specified session id not found - 0 (0x640000)
OS Deployer 4 - Scheduling Failure
Receiving the following error: "E00090002: Failed to add the scheduled task. An unknown error has occurred. Please reinstall ManageEngine OS Deployer 4 Management Console." Result in Event Viewer: "Scheduler failed to run task with GUID "changes every event created" because of error 2 (Failed to find the file (folder) or the key (value) in the registry.)." Imaged a number of machines on the 19th March 2014 with no errors showing. No changes were made to the system over night. First log
Deply By Psexec 1620 error
Hi iam trying to deploy ManageEngineAssetExplorerAgent.msi then i get this below error T h i s i n s t a l l a t i o n p a c k a g e c o u l d n o t b e o p e n e d . C o n t a c t t h e a p p l i c a t i o n v e n d o r t o v e r i f y t h a t t h i s i s a v a l i d W i n d o w s I n s t a l l e r p a c k a g e . msiexec exited on 10.***.***.*** with error code 1620. Please assist
Problem using Unversal Deploy
Trying to image a Lenovo 440P with a 440S image pointing to the 440P drivers. The image deployed and I saw the screen where it said that it was copying the drivers down. Upon reboot the system blue screens, and will not boot up.
Deployment error
Hi. I'm now testing OS Deployer's demo in virtual environment and trying to deploy a master image using PXE-boot on target machine. OS Deployer Agent boots successfully and says it is waiting for deployment. Server sees target machine, i start deployment task, target machine reboots and that's all. In logs there are errors : Source '' is unavailable. Additional info: -------------------- Error code: 6 Module: 126 LineInfo: 70E26A1BA387E86E Fields: $module : "C:\Program Files (x86)\Common Files\ManageEngine\Agent\osd_server.dll"
Auto Start To Opreating System Doesn't work
Hey When We are running your 30 days free trial of your OS Deployer Tool 5. And sets that i should go into Windows after 10 sec in the pxe boot menu. it just wont Work. we have waited up to a minute and nothing happens, now we are not sure if it Works at all? anything you can tell us about it? is it the trial version or what?
No Config File PXE
Machines are not finding configuration file, when i try to use PXE. I have configured option 66 and 67. No other PXE is installed. Components have been uploaded. PE image created and uploaded. Machines will say they are downloading bootwiz.cfg but then indicate that no config file was found.
Remote os deployment
Hi, I am trialing OSDeployer 4 and trying to setup pxe boot so a deployment can be made from the deployment server to a remote machine. I have configured the pxe client to auto start os bootup after 10 seconds, when I try to remote deploy an os to this machine, which is turned off, the machine starts correctly but it always boots into the os and does not perform a new deployment. Can you please shed some light on this for me. Thanks. Geoff.
OSdeployer Driver Repository.
Hi I want to use Universal deploy, but wanted to know, how the structure of the Driver Repository should be, am I able to put PC drivers in folders within the driver repository or do I just use one folder with all of the different PC drivers I require in it, with no sub folder structure. many thanks
PXE-No Configuration file present
Hello, I am trying to use the PXE server on ME OS Deploy. When I boot a machine up to NIC, I get starting Manage Engine Loader-Downloading Bootwiz.cfg Then i get Acronis Loader: No configuration file present. I have uploaded the configuration components, created a PE boot environment and uploaded that as well. Option 66 and 67 have been configured. No other PXE exist on the network. CAn someone pls help me resolve this error. Thanks Dave.
PXE Boot No configuration file present.
When i try to PXE boot clients into OS deploy, the Manage Engine Loader starts it indicates its downloading bootwiz.cfg. Then It indicates No configuration file present. Ive uploaded components and PE image. Option66 and 67 are configured. I need some assistance,\ Dave
ManageEngine OS Deployer 5.0 - Now Available
Dear Users, We are glad to announce the general availability of ManageEngine OS Deployer (OSD) 5.0 for download and evaluation (30 day free trial). We take this opportunity to thank all our customers and users for their feedback and the continued support. Highlights of OSD 5.0 * Support for Windows 8.1 including Update 1 and Windows Server 2012 R2. * Updated multicast protocol that enables up to 5 times faster deployment (compared to OSD 4) to multiple
Deploying an Image from a USB Drive
Hi, we are trying to use OS Deployer to image some new laptops that don't have any onboard ethernet. We want to try and avoid using a USB to ethernet dongle or trying to deploy over the WiFi connection. Our thought was to install PE components on an external USB drive along with the deployment image, then boot off the USB drive and run installation from there. Is this type of deployment possible?
Client not responding after deploy
Have tried multiple desktops and the scenario is always the same. Boot desktop up to osdeployer agent> Osdeployer sees this machine as being online > Deploy image to the machine > Shows about 4% completion and then fails. error log: Client 'x.x.x.x' is not responding error code: 1 module: 52 we are running osdeployer 4.0.2
Problem deploying image in Os Deploy 4
I just upgrade my osdeploy 3 to 4. After the upgrade i tried a deploy of a workstation (Dell Optiplex 7010). It fails directly. Same Image as the one I used in the 3. Also same machine that has succeeded with Osdeploy3 .I have also included the log file. please advise Kind Regards Tim Verduyn
Next Page