Cisco Catalyst 4006 Switch
Sir, I have a Cisco Catalyst 4006 Switch. But the CPU Utilization alway show 0. Why? The OID for this device is correct. Sam.
Service Pack 1 for OpManager 5.5 Release Notification
Hi All, We are pleased to announce the availability of the Service Pack 1 to OpManager 5.5 (Build 5510). The latest version of the product can be downloaded from the below url: http://www.opmanager.com/download.html Users who are already with OpManager 5.5 (earlier Build Versions 5501 to 5504) should apply Service Pack 1 to upgrade to the latest version (Build Version 5510). Users of OpManager 5.0 (Build Versions 5004 to 5010) should first apply the Upgrade Pack to migrate to OpManager 5.5 (Build
MySql Issues
I am getting this error as of tonight and I cannot seem to figure out what it means. Exception occured while forming SQL to get Total Count; nested exception is: java.sql.SQLException: Syntax error or access violation, message from server: "You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near 'WHERE Alert.ID >0' at line 1" I just edited the database config file to use my own instance of mySql which is 4.12 and on port
User Manual Inconsistancy
Im trying to figure out how to build custom SNMP TRAP Processors and the user manual does not coincide with version 5510. below is a snip-it from the manual. On the right, select Load Traps from MIB under Actions is not in version 5510. Plus I need to know if <OpManagerHome>/conf/mibsToBeLoaded.conf has to have mib files loaded in order of thier dependencies. Basically im trying to load the needed traps for Cisco Access Point 1100's so that the traps i get from remote users authenticating and de-authenticating
Repair Database
We had a hard power outage the other day. I tried to use the repairdb.bat in the bin folder. I receive this error message ever time I try and run the bat file. myisamchk: MyISAM file ..\mysql\data\OpManagerDB\alert.MYI myisamchk: warning: 1 clients is using or hasn't closed the table properly Can you please provide some guidance on the situation. Thanks
How to use Existing MySQL and Apache
Hi, I am trying to install OpManager in my Redhat Linx 8.0 box that already running Apache and MySQL server. But after installation I found that OpManager itself install another instance of Apache and MySQL. Is it posible to configure OpManager to use existing Apache and MySQL?? Regards Nemo :?:
nmserr.txt
what does the following mean? 08:50:34:750 MISC: -------RDBMS related information------ database product name = MySQL database product version=4.1.11-standard database driver name=MySQL-AB JDBC Driver database driver version=mysql-connector-java-com-3.0.9-stable ( $Date: 2003/10/02 15:36:12 $, $Revision: 1.27.2.25 $ ) database user name=mysql@rts.internal.rXXX.com database URL=jdbc:mysql://172.29.XX.XX:3306/OpManagerDB3 ****************************************************** 08:50:43:656 ALERT: AlertObject
Is the availabilty/ping monitoring result reportable?
I would like to poll the ping result and display them as a graph. Is the ping result has round trip time, packet drop ratio stored? How to graph them, similar to traffic graphs? Thanks, Min
How To save the events older than 30 days on a disk
In the db maintenance settings you can specify the number of total alarms stored into the database and the time frame older alarms are deleted. Is there the a possibility to store the alarm database to a disk for audit reasons?
Custom Temperature probe
Anyone knows if exist an OID to monitor temperature on motherboards with chip Winbond W83697HF? Thanks a lot.
Hi CPU Utilization
Hi, I'm monitoring thru WMI a 4 processeurs Win2000 server. It shows 98% CPU used on each processeur but it's not the reality... Most of the time it's only 2% used... Any idea ?
Sp1 conflist with Ciscosecure software
I tried updating to Opmanage build 5510. Unfortunately the Windows Opmanage service now won't start saying 'Port 2000 port needed for opmanager has been occupied by some other application'. Which is right! It's occupied by CiscoSecure ACS which is also installed on the server. Build 5504 didn't have this as as requirement. Why 5510? Also I've tried changing the NMS_BE_PORT value in wrapper.conf but no luck, I still get the same error. Is there a way around this as I'd prefer not to go back to 5504?
Monitor Print Server
Sir, I would like to monitor the print server. Like AXIS, Intel and etc. They are little bit different with printer. Is it possible to have a separate "Infrastructure Views" and customize "Snapshot" page? Sam.
It's possible...
Hi, if I have on the same machine OpManager & NetFlow Analyzer I can configure both program to start and use only one Apache server and one MySQL database? Thanks.
URL Monitoring and alerts
I have a number of URL monitors set up ... and they are monitoring perfectly ... except I have one question relating to the e-mail notifications for these URL monitors. Unlike the standard e-mail notification profile ... the URL monitor does not seem to have the option to define the FROM address for SMTP notifications. How can this FROM address (for SMTP notification) be changed / set on existing and new URL monitors ?
Re-usable URL monitors
Hi there, Is there any way to create *re-uableable* URL monitors? Having to add the same monitor, just with a different URL for hundreds of hosts seems way over the top. E.G We monitor whether a ASP script is running on all windows servers by querying /test.asp Currently it seems I have to define a new monitor for every single windows server. VS just defining (for example) http://$$HOSTNAME$$/test.asp and just adding that as a URL monitor. Kind regards, Leonard --
New Alarm Escalation feature - Run this check every xxx min
We want to be able to escalate a critical alarm, say a "router-down" alarm that is not responded to within 20 minutes. This is impossible when the process to check overdue responses is run hourly, at a minimum. Please consider modifying the "Run this Check every XX HOURS" so the increment is in minutes, as in "Run this check every 5 MINUTES.
Possible error in OpManagerServerClasses.jar
It looks like in the OpManagerServerClasses.jar there is a naming error as there is both a com.adventnet.me.opamnager and com.adventnet.me.opmanager in the jar file. The UPSDiscoveryFilter.class is contained within the tree that has opamnager as it's name.
Notification Log/History
There should be a feature which will help me to read all the past notifications (email, sms, commands etc) . This will help me to find out whether i have missed to attend any notifications or not.
How to avoid the default page after login
Hi, for my convenience, I configured some e-mail notification profiles with the HTTP-link pointing to the device that generated the error. E.g. device = switch --> link = http://opmanager-server/devices/objectdetails.do?requestid=SNAPSHOT&name=$displayName&mapName=Switches.netmap This allows me to open the right device window from my email-client within one mouse-click. If I'm already logged-in into OpManager, the new window points to the requested device/link. If not, I have to login first, but
multiple front end Opmanagers linked to same remote MYSQL DB
Is it possible to have due to large ammount of instances that are being monitored by a single Opmanager system build an environment where you have 2 or more systems running Opmanager all linked to the same exact OpmanagerDB on a seperate MYSQL server? This would be simular to what Solarwinds Orion does. I would love to have one system dedicated to autodiscovery, while another system is doing the actual polling of the systems, while possibly having a 3rd system available just for the web/java portal.
CPU utilization for SMP servers
In testing we're weeing odd behaviour for SMP servers. E.g. The OID being queried by OpManager is .1.3.6.1.2.1.25.3.3.1.2 Which gives a zero utilization result, *but* here follows a walk of that OID # snmpwalk -v2c -c xxxxx xxx.xxx.xxx.xxx .1.3.6.1.2.1.25.3.3.1.2 HOST-RESOURCES-MIB::hrProcessorLoad.1 = INTEGER: 0 HOST-RESOURCES-MIB::hrProcessorLoad.2 = INTEGER: 1 HOST-RESOURCES-MIB::hrProcessorLoad.3 = INTEGER: 1 HOST-RESOURCES-MIB::hrProcessorLoad.4 = INTEGER: 1 Bug? Is there an easy way to fix
New Alarm Escalation feature - Use BV rather than Category
Currently Alarm Escalation is limited to grouping by Infrastructure Category. This prevents us from grouping our servers, for example, into critical and non-critical groups. Certain servers can wait until morning to be rebooted. Other servers might really need immediate attention. We could create a Business View called "Critical Servers" which could contain a list of these critical devices. Please consider using Business View rather than (or in addition to) Infrastructure Category for grouping devices
ManageEngine OpUtils 3.1.0 Service Pack 4 available!
We are pleased to announce the availability of Service Pack 4 for OpUtils 3.1.0. The following are the enhancements made over the previous release: 1. You can now send us your queries and feature requirements from the product by selecting the OpUtils Support tab. 2. Tools that uses SNMP to get the information was throwing an exception, which is now fixed. 3. Issue related to OpUtils icon in the Windows system tray has been fixed.The service pack can be downloaded from: http://manageengine.adventnet.com/products/oputils/service-packs.html
Performance Stats for Nortel Routers
I have a Nortel ASN router which does not show up under the available device types. When monitoring this router, I don't received any performance stats like CPU and/or memory utilization, or interface related stats. Is this a MIB or OID issue? Thanks!
It's possible configure 1 MySQL and 1 Apache?
Hi, if I have on the same machine OpManager & NetFlow Analyzer I can configure both program to start and use only one Apache server and one MySQL database? Thanks.
Servers only allowed 1 NIC?
all my systems that are servers only show 1 nic listed. This is major bad. we have in cases 5 NICs in 1 system that is a SERVER. I DO NOT want to change the classification of the device from SERVER to ROUTER or SERVER to SWITCH to be able to monitor more than 1 NIC. Why did you guys make it this way?
IBM Blade Servers
I noticed that there are now vendor monitors for the xseries servers from IBM, are there any blade server monitors? That would be a nice feature.
Additional Feature Request
today there are only 2 variations to a users rights, READ-ONLY of FULL-ACCESS. Can you make it to where this can be more granular. Also I dont know if you have it but the ability to group users (when you have more than 1) into catagory groups. I will try to explain my thoughts below. lets say we have 3 groups of users , Network Admin / NOC / Reports-Only in the group Network Admin there are 2 users Steve - has full access just like admin to do anything Harry - has all access except the ability to
Installing OPManager, ServiceDesk and OPUtils on same machin
Is it possible to install all three application on the same server?
It's possible...
Hi, if I have on the same machine OpManager & NetFlow Analyzer I can configure both program to start and use only one Apache server and one MySQL database? Thanks.
Thanks
Just wanted to say thanks to all the guys that work on the team for OpManager. It's nice to find a developement team that take the constructive critisisms and comments and request for improvements from their users and actually listen and take note and them implement changes to effect them. Your responses to the forums is fantastic, the speed and the effort that you put in is very appreciated! This product just keeps getting better and better.
disk space used/avaialabe
I'd like a report that shows how much disk space is used and available by server in bytes (KB/MBor GB). Is there any way for OpManager to support this?
Inventory Reports
Sir, How can I generate the Inventory Reports per Infrastructure Views? - Servers - Routers - Firewalls - Switches - Printers - Desktops - UPS - Wireless Sam.
Bulk Cancellation of Monitors not working -- it used to?
I can no longer remove a monitor from a group of Routers. I just noticed this, and this is a week after applying the April 29 hotfix. Here is the behavior I�m seeing: I�m trying to remove Vendor Monitors (Cisco) from Routers. The way I have removed monitors from a selection of devices is to: - Select Configuration Wizard - Select �Add a new monitor to several devices� - Select �Vendor Specific Monitors� - Expand Cisco Monitors, select a monitor which I know is applied to several routers, (example
Trap Processor Properties
Can the actual values of the varbinds be used in the Message section? Something like: $SourceMO(.1.3.6.1.2.1.88.2.1.1). Thanks.
Scheduled Reports
Hi All, Is it possible to schedule reports to be run and emailed at specific times? If not this would be handy to have for things like the "All Servers Disk Usage Report" - I'd like to be able to email this to our support staff each day.
Emailing alerts and others
Hi, I was wondering if someone can help me with OpManager 5.5 web client. Here are my problems: 1. I cannot email alerts, even though the Resource Monitor shows 2 violations of the threshold. When setting up the Mail Server, the test email works. Am I missing a step somewhere? 2. When I first setup the threshold for one of my Resource Monitors, an alert showed up (almost immediately). I accidentally deleted the alert and the alert no longer shows up, even though the threshold went from "normal" (after
Business view map
All, Is anyone have suitable graph for business view background? Can you share with us? Sam.
are there invalid names for Shortcuts in Business views.
below is a slightly modified version of the URL that is called when i click on a Shortcut I have on a business view.. This generates Error on page. http://166.17.206.21:8080/map/MapView.do?name=rtsci-11.11.1.0/24&selectedTab=Maps&selectedNode=rtsci-11.11.1.0/24_bview.netmap&jgraphMap=true&viewId=rtsci-11.11.1.0/24_bview.netmap&displayName=rtsci-11.11.1.0/24 is the name "rtsci-11.11.1.0/24" an invalid submap name? also note i Saved the submap as "RTSCI-11.11.1.0/24" dunno if case sensativity applies
Next Page