Creating Auto-Login links for the webclient
Im trying to link op manager to an existing website that I have. The trick is that I want to link to op manager from the current site and not have to login. So basically I need to know what code I need to make this auto login take place. Let me know. Thanks!
Cannot add Network to Discovery
I have just installed the demo of OpManager. When I try to add a network to the Discovery, it keeps telling me "Enter a valid network address". I have tried the following combinations: Network Address: 172.21.29.195 (my IP on my local network) Subnet: 255.255.0.0 (to include my other subnets of 172.21.29.*, 172.21.30.*, 172.21.31.*) I have also tried Subnet 255.255.255.0 I have also tried Network addresses 172.21.29.1, 172.21.29.255, etc... Nothing works! Please help! What am I missing? :oops:
MS Exchange 2000 / Upgrade Opmanager 5.0 to 5.6
Hi, I upgrade opmanager 5.0 to 5.6 following these procedure: 1.- Applied pack to 5.0 (build number 5004). Result opmanager 5.5. 2.- Applied pack to 5.5 (build number 5504). Result opmanager 5.6 After this procedure, in the snapshot for server (running exchange 2000), I tried to add application monitor for exchange 2000, and the menu display MS Exchange 5.5. The most importan chatracteristic to opmanager 5.6 is monitor exchange 2000/2003 but after upgrade don�t appears this option. Thank
Test of OpManager, support needed
Hi all! I'm testing OpManager with the intensions of replacing CA UniCenter. But I've got a few problems with HP-UX and Netware servers. Netware: The netware servers are running the hostmib.nlm (20040805) and I can use mib browser to see all required information. The CPU utilization monitor also work. This monitor are using the CPU Utilization based on HOSTRESOURCE MIB. But what should I do with disk and memory monitors? I know I could make custom monitors, but these things should work straight out
Email Notification
Hi, When I try to set up email proxy, and go to test message, I get the following error message: Unable to connect to the mail server. Please check if the Mail service is running on the specified port. The port I used was 25. The mail has to go through an Exchange server. Is there perhaps another port that must be used. Please help
HP-UX CPU Utilization
I'm trying to get the %CPU Utilization out of an HP-UX 900/300 via the "hp-unix" MIB. The following is the custom monitor: <CUSTOMGRAPH Name="HPUXCPUUtilization"> <YAXISTEXT>%</YAXISTEXT> <DISPLAYNAME>HP-UX % CPU Utilization</DISPLAYNAME> <name>HPUXCPUUtilization</name> <oid> (((.1.3.6.1.4.1.11.2.3.1.1.13)+(.1.3.6.1.4.1.11.2.3.1.1.14)) / ((.1.3.6.1.4.1.11.2.3.1.1.13)+(.1.3.6.1.4.1.11.2.3.1.1.14)+(.1.3.6.1.4.1.11.2.3.1.1.15))) * 100 </oid> <type>node</type> <timeAvg/> <interval>900</interval> <THRESHOLDENABLED>false</THRESHOLDENABLED>
How to get MS-SQL Server Stats
Hi, I have a Win2000 Server with Microsoft SQL Server 2000 installed. Windows is SNMP-enabled, and I have no trouble seeing it on my servers view. It also recognizes the MSSQL port. But, how do I configure my server and/or OpManager to view the information about the database statistics? I've seen it as a feature on the web site, but don't know how to enable it.... thanks!
2 Items
1) I see in another post that I am supposed to be able to setup Exchange 2000 monitoring items under applications. I only see Exchange 5.5. Where are the Exchange 2000 items? 2) None of the WMI items appear to work properly. I have removed the SNMP items that are setup by default, and replaced them with WMI for processor, memory and disk. If I go to test, I get a tests OK message, and the graphs get updated. No further updates take place, the last polled is blank, and the next polling time is set
CPU Utilization monitoring - buglet?
I noticed that CPU monitoring only checks UCD-SNMP-MIB::ssCpuUser.0 but neglects to figure in UCD-SNMP-MIB::ssCpuSystem.0 (or UCD-SNMP-MIB::ssCpuIdle.0 for that matter). A server that has very high system CPU overhead will be graphed incorrectly in this case.
SNMP Trap Processors not capturing Trap Description from MIB
In order to make the notifications for Traps received understandable, I would like the notifications to focus on the "Trap Description" I would like in fact, to use the "Trap Description" in the subject line and exclude the OIDs. Here's an example from Trap Tests sent from an IBM Blade Center Management Module (BLADESPPALT-MIB) From OpManager "Load Traps from MIB" displays trap from above mib as: Trap Name__________ Description ibmMMTrapSysLogS___"System Alert: System Log 75% full." ... Trap notification
Data storage pattern
Hi, In a similar vein to this: http://forums.manageengine.com/forumHome.do?forumGroupId=49000000002007&forumTopicId=49000002654223 ...what are the data storage patterns for OpManager? many thanks, alec
How To notify certain people about certain servers
That is basically it. We have a few managers that only care about certain servers, how do we get them notified about critical events on only those servers? Version 5.6. Thanks!
service monitoring problem on a server with two lancards
i face a problem to monitor a service on an windows machine (server) with two lancards. the monitored service communicates via the 2nd card, opmanager has discovered this server via lancard 1. The service is indicated as "down" in opmanager. is there anything i can do to handle this ? The service must communicate this way !
Add notes to any device please!!
Hi I would love to be able to add notes to any device in the same way you can add notes to an alarm. This would allow the system to be used for change management (any changes could be logged as a note) Also, I would really like to be able to attach external files (or at least hyperlinks) so that device configurations, contract documents etc can be readily accessed from the device within OpManger. It would be good to extend the integration with ServcieDesk so that any device can be linked to any asset
Custom Graphs using different SNMP Ports
I am trying to create a Custom Graph using another port besides 161. Checkpoint uses port 260 to access their enterprise mibs. I am able to get the value in MIB Browser because the parameter tab allows me to change the snmp port. I did not find this feature in the Custom Graphs window. Is there a workaround? Thanks, Jeff
Multiple SNMP Ports on a Device
Hi, I have two SNMP Agents running on a device - one on port 161 and the other on 165. I want to create Custom Monitors for the OID's exposed on each port. How do I do this? Thanks
OpManager Free Edition allows to manage 20 critical devices
Installing OpManager Free Edition allows you manage 20 critical devices in your network. I updated from OpManager build 5600 to 5601 (Free Edition) and the limit is always 10 devices... Is the free edition limited to 10 or 20 devices ? Thank you
Restricting user access?
I have been configuring OpManager for user logins for specific network views. My question is how to edit the top tabs for help, personalize, talkback etc. The issue is that after I assign a user a password they can change it through the personalize link. I am curious on where I could edit the .xml files to remove this feature, keeping the user from changing the password and appearance. I am also curious if I am able to add another email so when a user submits a talkback I cam CC'd on it as well.
service won't start?
We're still in our eval period and coming up with something that is killing opmanager. opmanager has been running fine to date, but today when I tried to start the service I got: STATUS | wrapper | 2005/10/04 15:43:34 | --> Wrapper Started as Service STATUS | wrapper | 2005/10/04 15:43:34 | Launching a JVM... INFO | jvm 1 | 2005/10/04 15:43:35 | Wrapper (Version 3.1.1) http://wrapper.tanukisoftware.org INFO | jvm 1 | 2005/10/04 15:43:35 | INFO | jvm 1 | 2005/10/04 15:43:36 | taryIconProps {DefaultMenuItem=Status,
Cisco Catalyst WS-C2950T-48-SI Switches
Hi there We have a number of Catalyst 2950-48-SI switches on our network, but they appear as unknown devices in OpManager. I have tried to look for them manually, but the closest in OpManager is the 2950-48-G. Will selecting this device work? Thanks
Newbie Install Issues - Failed to establish connection with
I have installed OpManager on on E-Smith SME server which is based on Redhat. When i run StartOpManagerServer I get the following error "Verifying connection with web server ... Failed to establish connection with web server. Gracefully shutting down OpManager." When i run StartWebSvr.sh I get this error: "[root@devbox apache]# ./StartWebSvr.sh bin/httpd: error while loading shared libraries: libdb-3.2.so: cannot open shared object file: No such file or directory" Any Suggestions
Can we monitor Oracle Application server
Hello, Can we monitor Oracle Application server through Applications Manager. We have Oracle ERP 11i suite, I believe application server is 8i. Thanks Raman
Opmanager refused to send mail alert
Hi Pls i need help my Opmanager has refused to send email alert . The mail server settinhg looks correct but yet i cant resceive mail alert when devices go down. pls help. Fox
Opmanager icon
Hi at all, I'he just installed Opmanager 5.6 and I have not Opmanager icon in the taskbar (near the clock). My O.System is Windows 2003 server Sp1 and I have already put the license into the program. Can somebody tell me what I have to do in order to see it? Thanks
V40z Server
Hi, I have two Sun V40z server running on dual AMD opthelon processor. I want to monitor this boxes using OpsManager. Everything (Services, Interface, Disk Usage) is working fine except CPU and Memory utilization. CPU always stay at 26% and Memory 57%. I am using SNMP agent in the boxes. Is there anyway I can monitor both CPU of the box. ~/Dev
customized reports
I need to create customized reports based on the performance data such as Tx Rx traffic on any given set of interfaces. e.g DSL links usage report, T1 links usage report or backbone usage report. I failed to find the way. What did I miss? I also need to know how to save the above jobs so I can run the same type of report daily/weekly/monthly. Thanks for the help, Min
Win 2003 64-Bit
Can I install OpManager on Win 2003 64-Bit OS?
opmanager mysql application monitor
Hey guys according to the opmanager website, opmanager 5.6 contains a mysql application manager (http://manageengine.adventnet.com/products/opmanager/application-monitoring.html>; how ever we have a licensed version of opmanager 5.6 for windows and I am unable to fond anything at all about mysql application monitor can someone please assist me here
Listing of improvement to next version
Hello everybody, I would like to know where I can find a complete listing of improvement to next version (and exhaustive roadmap too), if it is available to public person like me. I have already read this post: http://forums.manageengine.com/forumHome.do?forumGroupId=49000000002007&forumTopicId=49000002636111 I have just seen the list of major features planned for the next update: 1. Custom Fields to Device/Interface Details 2. MSSQL support 3. CPU/Memory Diagnostics ( CPU/Memory Usage per process
Alarm Escalation Cycles
When defining an Alarm Escalation, what is the point of being able to define the rule timeframe down to minutes; (e.g. "If x category is not cleared within x minutes") ...if the email escalation can only be defined in hours? ( "Run this check every x hours") If an alert has not been acknowledged or cleared within x minutes, I need to escalate it immediately via email; How does one achieve this?
Feature request!
Hi, On the router/switch interface graphs of older data, I'd like to see two extra lines for maximum in/out traffic rates, as well as the average values reported at present. The traffic rates on these graphs are averaged down as you go back in time, and the maximum values are lost. A bit like what you can do with MRTG! many thanks, alec --
logs from scheduleds scans
Hello, If we set scheduled scans in Global Environment can we read the logs per day what was scanned? if yes where are the logs. tnx.
Event Logs Issue
I am not able to get any alarms from event log monitoring of the localmachine. After poking around on these forums, I found a post asking someone to test WMI by running: cscript event.vbs machinename domainname\administrator administratorpassword timeinterval(in seconds) The error I get is, "Error # User credentials cannot be used for local connections" If I rerun the above code and omit the username and password, it returns some event data. What can I do to monitor the event log on the same machine
Devices Do Not Delete
I am unable to delete devices from OpManager, from both the web interface or the client - no errors are shown when I click "Delete". any ideas? Thanks - Adrian.
Viewing Unsolicited Traps
I expect this is an easy one, but how do I view the full content of an Unsolicited trap? When I view through the WebUI, I can only see two lines of any Unsolicited trap, which doesn't give me enough on the detail to determine what the trap is about, and thereby create a trap processor. Is the full trap kept in the logs somewhere?
Alarm Escalations
Thanks to Gabriel for the tip on adding comma delimited addresses to the "To:" field on the Notification Profiles setup. That is going to help me overcome a large stumbling block I have. Along the same lines; I think the Escalation set up (Admin>Alarm Escalation) is a little too broad scoped. Correct me if I am interpreting this wrong, but let's say I have an alarm on one of my MX server, SMTP is down. I have the notification profile unix-mx-admins consisting of two SMS addresses and two email addresses
Notification per service
Hi, I have linux server that has apache and oracle installed on it. Would it be possible to configure the notification in such a way that if the oracle server goes down notify the DB administrator and if the Apache server has a problem notify only the system administrator. Currently the notification is being sent out to all. Thanks Ramzi
HotSpot VM error
Hi! I had OpManager running on Suse Enterprise Server 9.0. After running for a few day, it display "Internal Server Error" on browser client after login. The OpManager stop working and there are errors hs_err_pidxxxx.log on Opmanager Home Directory. After reboot, it will work for a few days and repeat the error...
Date sources other then SNMP
Is it possible to create data sources or service monitors other then SNMP? Like scrip or something for devices/services that do not support SNMP or WMI
OPManager on Linux : server start problem
Hi all, I'm trying to test OPManager but after installation on Linux Fedora Core 2 I had a problem starting the server.I receive a message saying that the port 80 is occupied by another application. I tried to change http port to 9090 with OPManager tols and also on the httpd.conf but also on the port 9090 I freceive the same message. Could you help me? Thanks Stefano
Next Page