HP StorageWorks 1000 Modular Smart Array
Is it possible to monitor HP StorageWorks 1000 Modular Smart Array, HP StorageWorks 30 Modular Smart Array and HP StorageWorks 1500cs Modular Smart Array with op manager? If so can opmanager support give me some help setting this up? Regards Stefan
Run Program Notification Profile
Is there a way to include a hostname or what the service is dynamically based on what item goes down? Similar to the way it works in email notifications? I have a script that takes in arguments so is there a variable I can use to get that type of info? Like $message or $displayName? Thanks in advance. - Adam
OM6 premium linux with MSSQL2k5 backend DB: licensed or not?
hi. we have purchased OM6 premium for linux and want to use it with a MSSQL 2005 backend database (which we already own). I have logged a case with adventnet and received instructions how to hack MSSQL support into OM6. Now we saw a new version / servicepack available on your site which states MSSQL support is available. i have 3 questions: 1) is this newer version (6013 i believe) a better way to get MSSQL support in our OM6? We have not installed it yet so we can do it right the first time. 2)
SD+ Integration gives error
Hello All, I'm using SD+ 5.5.0 build 5507 and Opmanager 6 build 6012. I've been trying to get integration to work, but can't get it. I've moved OM to a separate server, and I've tried every way I can think of to give OM the name of the SD+ server. I've even entered it's ip address. SD+ runs on port 80, OM on 9090. AD authentication is turned on, and the default account (administrator) was deleted. The message I get is : "Unable to fetch values from ServiceDesk Plus, The server might not be running
Discovery wrizard can't finish (OP7.0)
Discovery in Progress alwasy stick in the 96%. Why? OP7.0 (windows version)
Data not available. BRIDGE-MIB might not be implemented in t
Hi, i have install new cisco2960TT now i want to do switchport mapping using tool which comes with opmanager 6 but it isn�t working giving me error sayign �Data not available. BRIDGE-MIB might not be implemented in this device � i have seen that this mib is install in the server...also in the switch. rest of the switches in the network in able to do switchport mapping. with the tool opmanager ..only the new switches i m not able to i dont knwo the reson why. But when i try switchport mapping with
Business View Popup Details
Is there any way to change the details that are shown upon mouseover in business view? I would like the display name to be a number and the popup details to include location details and other information. I'm using OpManager 7 currently. Also, is there a way to get a report of all availability statistics in a numeric representation list of each site rather than the graphical display (maybe in a table or something of the sort)? Thanks for your help.
snmpv3
Does Ops Manager 7 beta support polling of snmpv3 capable devices? Thanks!
Warning Thresholds
Is there a way to set a counter to warn at a certain threshold and go critical at a later one? For example, if my CPU is hovering around 80% or more for a sustained period I would want a warning. If it is surpassing 95% for that same period I would want a critical alert that goes to a pager. Thanks, Colin
Oracle MIB on AIX
Hi, I need to get OPmanager communicating to our Oracle Databse (9i - 9.2) on a IBM AIX box. Where can I get the MIB from?
WMI Win2003 server
Hi, I am evaluating the new 7 version in an windows 2003 server environment SP1, SP2, without any SP and with no SNMP. So i have changed the templates to gather wmi information for CPU DISKS etc. No connection is done although the account is a domain admin account with full rights. I also checked with Microsoft to see if i have any problems on WMI but the tests are ok. Imagine that i cannot connect to WMI no even on the server were the application is installed. Regards Gabriel
Database Maintenance
I want to clean up my OpManager database as it's over 6GB now, but I don't want to just start over with it. Is there a way I can purge all of the performance data but keep all of the existing settings and managed items? I'm running 6016 with a MSSQL backend database. Also, how often does the Database Maintenance run to clean up the database, and is there a way to force the maintenance procedure to run? Thanks.
Support for multiple browser windows
Hello, I recently came across an issue with OpManager 6 where it doesn't appear to handle multiple broswer sessions properly. Here's what happenend: I went into the Notification Profiles page and create a new notification profile. To keep our notification profiles in a standard format I like to view an existing notification profile while I work on the new one. So I opened in a new browser tab one of the existing notification profiles. I click backwards and forwards between the tabs as I fill out
Server with MSSQL application monitoring
I am able to add mssql monitoring to a server, but after it's added the section "Application Monitors" shows "No Application Monitors associated" I have had sql alerts from the server. Is this a bug?
Alarm is trigger but notifications aren't
Hi, I'm testing OpManager MSP and I have a device with 2 notification profiles, one is Log a Ticket and other is Run a System Command. It seams that, after a while, when an alarm is trigger (device is down) the notifications aren't trigger, i.e., no Ticket is created and no System Command runs. But, if I reboot the central machine, everything starts to work again properly. What could be happening? Regards, nmfn
device availability error
opmanager seems to be displaying the availability of one of my switches wrongly. the switch is working fine but in the availability pie graph its recorded as downtime, and the pie graph is red. other switches are recorded correctly. only one is wrong. so how do i correct this? how to turn it back to uptime and green color. thanks.
Monitoring UNC
What is the best way to monitor a UNC (shared folder) in OpManager 6.0 Build 6015? OpManager monitors the server on which the share is hosted but we'd like to monitor the actual share in addtion. Thanks! :D
COntrol Bar
AlL the items on my control bar disappeared (Home, Admin, etc.). I have to way to configure OpManager.
Recomended Distro of Linux for OpManager 6
What distribution of linux is the recommended one to use when installing OpManager 6?
Configurate Solaris, AIX and Linux Servers in OpManager
Hello Friends I have Solaris, AIX and Linux Servers but OpManager doesn't take information this servers, it's necessary configure anythings in my servers and OpManager , Can you help me? because I have 5 Solaris, 2 AIX and 1 Linux and This servers are important for me. Thanks for help me Art Lima-Peru
User Exclusions
Is there a way to limit the tools that a specific user can use? Or is it pretty any person who logs in can use any tool? If that is the case, is there any timeframe on when/if a feature like this would be implemented? Thank you!
OpManager 6 with MSSQL 2005 disconnects
Hi, I've setup OpManager 6 newest version 6016 on MsSQL 2005. I start OpManager with the startopmanagerserver.bat command and everything works just fine. After a short while though, I get the following error: "Connection to the Database is lost. Server is being Shut Down. Please Restart the server." Then I have to run the command again. OpManager is also installed as a service, but even if I set up Windows to restart the service on failures, it doesn't and OpManager stays offline. Any clues? Regards,
SSH not working in OpManager 6.0!!!
Hi all! I trying to find out in my problem with connecting to non-snmp devices forums.adventnet.com/viewtopic.php?t=84411 I received the following results: When i trying to connect on ssh-protocol OpManager answer that "device didn't response", "applnerr*.log" have no any errors. But when i start telnet-service on client and change "Connection Protocol" from SSH to Telnet in "Password Credentials" of the device, then connection tests passed and monitors working correctly!! But Telnet-protocol is
Cannot add MIB
Hai, i'm trying to add new MIB like attached, but it contain an error and failed to load. I have tried on other software tool and it can load the same mib, pls advice.
SMS (NwoSMS) with MSP doesn�t work
Hi Support, i�m trying to generate alarms and send to my sms gateway, but nothing arrives on the sms gateway. I use MSP and i�ve configured : to email address: 123456789@ip_host_now_sms but not information is registered on smsout.log Althouth this nowsms gateway was working ok with Opmanager "standalone". What do you suggest? thanks in advance W.
Windows ALERT not see with FireFOX 2.0.0.3
Windows Alert not see with FireFox 2.0.0.3 and a resolution 1280x1024
OpUtils - Build 4312 Available
Dear All, We are pleased to announce the availability of the latest update to OpUtils - Build 4312. Features & Enhancements in Build 4312 1. Support for retrieving the Config Files of Cisco devices running CAT OS has been included. 2. Option to import switch inputs to the Switch Port Mapper tool from a CSV File has been included. 3. Switch Port Mapper enhanced to show the MAC addresses other than "learned" state. 4. Issue in displaying the Alert count when accessing the client from remote has been
opmanger 6 on fedora 6
i have installed opmanger 6 successfully but i am uinable to access it via web interface i am even unable to run as can find startWebSvr.sh file so please let me know how to run it . Regards
snmp status polling
I NOTICE OPS MANGER CANT DO SNMP STATUS POLLING.. it will only do status polling of device by ICMP THAT IS USELESS WITH PING DISABLE NETWORK
Google Maps Integration - Documentation
Hello Support Team and Users of OpManager! I want to know, where is the existent documentation about the Goggle Maps Integration? In what manual I can found this information? At now, I just found a example video. But it isn't enough to show to customers. Thanks in Advance. Regards, Ren� Oliveira rene@inspirit.com.br
Installing Probe (MSP OpManager)
Hi everybody! I'm installing the MSP Probe version in my client's server (I already installed the Central server in my Main Office, and I created the Probe file, etc), but when I go to the web page :(https://servername) I've got this error message (see below). I did the installing 2 times, but the same problem. This is a Windows2003 SBS, and I tested other Probe in my site, with windows 2003 R2, and it works fine....somebody has any idea what could be the problem??? thanks!! Jose B. ----------- Internal
Automate Mapviewer for OpManager ?
Hello all, I search a means to automate the Mapviewer, that is possible ? I explain what I want : when a new computer is added in the network, how can I do to add this computer in the business view without use the mapviewer manually ? Thanks for the answers. Seinen.
OpManager 7 on ubuntu 6.06, fail to start
Hello, first: does opmanager runs on ubuntu 6.06? I installed and configured, but at start it says: Failed to establish connection with Web server. Gracefully shutting down OpManager. I copied the lib from backup but is the same. The script StartWebServer.sh does NOT exists. Any help please? Thanks in advance
Problem with Cisco devices after IOS upgrade
Hello, we've a problem with our cisco switches since we've updated the ios (firmware): after rediscover of an updated device, opmanager didn't find the correct interface (fastethernet/gigabitethernet) I've deleted and readded the devices, but still the same problem. after readd, same problem with the interfaces and in some cases the alarm profiles still exists on the readded device ->how can a completely delete a device from opmanager?? i've tested the cisco switches with new opmanager installation
Monitor Server Connections or Sessions?
Is there a way to monitor the number of active sessions (or connections) to a Windows 2003 server? This is not an active directory domain controller either... it is a webserver. Thanks for any advice or help... Scott
URL Availbility report
Hello, I need help to build reports. I want to set up a script, which will, allow me to creat a report for a specific period. For exemple, URL report for the day before, last week or last month . I need to creat these Availbility reports as follow: First: report for each URL second: report by grouping some URL Who can tell me how to do that or in what mysql table can i get this information. NB: It's possible to get the Data base Model? Thank you. Kem
Historic data gone/missing!
Hi all, We are running Opmanager for over a year now without a lot of trouble, but this morning when I wanted to open the statistics for a server I received: Status Message Unable to find the object: Hostname This was the case on all of our devices. So I figured, maybe the application just needed to be rebooted, so I restarted the services. After that when logging in I received some corrupt tables so I ran repairdb.bat. Now I was able to log in again and I was able to open a device page without the
OpManager 7: Start Server Error: libdb-3.2.so: Cannot Open
Hello, I just successfully installed the OpManager 7 beta into a linux CentOS 4.4 box with 2 gigs of ram, and dual Intel CPU's. When I attempt to start the OpManager server (sh StartOpManagerServer.sh) though it fails with the following error logged into stderr.txt file. /opt/Adventnet/OpManager/apache/bin/httpd: error while loading shared libraries: libdb-3.2.so: Cannot open shared object file: No such file or directory Any ideas? Thanks.
Port number
If port 80 is being used , what would be an alternitve port number to use
Customization for endusers
Hi, We are finishing to set all in Opmanager and we would like that when user is logged in OPmanager appears a business view instead the stand home page defined in OpManager. Somebody knows how to do that ? Many thanks PCO
Next Page