BRIDGE-MIB NOT IMPLIMENTED AND LAYER 2 VLAN TRAFFIC
Hello everybody, this is my second time query i m trying use switchport mapper tool on newly install cisco 2960TT switches and it gives me error saying bridge-mib is not implimented , however i am able to discover the switche and all the port and can able to see the traffic , so then when i try the switchport mapper tool of the utility OPUTIL it works fine and i m able to get details port mapping what is the prob. i have seen in switch there is not configuration changes.. and this only happen on
OpManager 6 not start on Linux Debian 4.0
Hi, I'm trying to install OpManager 6 on Linux Debian 4.0 (Etch). The server not start. Not connect with webserver I read other discussions in this page with solutions, because any works on my system. (install libgdm1, and others). If I start manually apachectl: # ./apachectl start ./apachectl start: httpd started If I start OpManager (in spanish): Starting AdventNet ManageEngine Server Modules, please wait Process : StartTelnetClient [ Started ] Process : OpManagerStatusProcess [ Started ] Process
Purchase Oputils
Dear Sir, Kindly reuest to inform the details proceedures to purchase the Oputils network monitoring tools and the contact dtails in Saudi Arabia Regards Usman Kurupath Sadafco Saudi Arabia
icmp on opmanger
what does opmanger use? icmp echo? icmp echo reply? http://en.wikipedia.org/wiki/Internet_Control_Message_Protocol ??
TFTP Vulnerability
Hi all It seems that with Opmanager 6, a TFTP server is installed and running by default. Unfortunately, this TFTP server has several vulnerabilities, most importantly it can be tricked into allowing directory traversals. See here (http://www.securityfocus.com/archive/1/459500/30/0/threaded) for more information on what I'm talking about, ignore the name of the software, Opmanager seems to be affected as well... This is bad and there seems to be no straightforward way of turning it off. Please provide
Anyone use Opmanager to monitor Packeteer --> Packetshape
How do i monitor thoses classes and partitions?
URL Monitoring showing service down when its up
I'm using build 6016. I noticed that when i attempt to monitor a URL, like 22.22.22.22:12... the monitoring software shows that the service is down, reason: host unreachable. However, when i click on the URL in the software, it brings up the site. It will also bring up the site if i copy and paste the URL into a browser. I've tried increasing the timeout and adjusting the get;put functions... but nothing. The authentication information that i've entered (since the site requires a login) is also correct.
test
test test...
OpManager Integration problem
Hi All, Does anybody know if OpManager provides any interface to integrate it with third party web portals? I need to deploy OpManager's reports on our internal web portal. Are there any RSS feeds, APIs, Source codes, databases that are open for user and I can directly work with? Please describe all posible ways to interact with OpManager. Regards, GK
MSSQL 2005 Monitoring
I am running MSP version 6. I am trying to monitor MSSQL 2005, and am not able to do it. As far as I understand, SQL 2005 does not support SNMP, so I am not able to monitor via the SNMP monitor included..and there is no WMI monitor for the MSP version. Does that mean that I can not monitor SQL 2005?
Stacked graph and alerting based on total
I have added a new WMI monitor which captures the processor utilization breakdown (DPC, Interrupt, User, Privileged). Can I use the same monitor to display a stacked graph of the values and alert based off the total value (not the individual values)? Thanks, Colin
OpManager7 - MySQL Performance Tuning - Too Many Processes
I am running OpManager 7 Beta on CentOS Linux with 2 gigs of ram. When I execute top, I am stunned to see how many MySQL processes OpManager spawns. {See Screen Shot Below}. I only manage two servers, so clearly I don't need so many memory hungry MySQL processes running. I have searched with no luck for the mysql configuration file used by OpManager, usually called my.ini or my.cnf. Where in the world is the MySQL configuration file? It needs to be seriously tweaked for performance. Thanks.[/img]
tripp lite UPS monitoring
has anyone successfully created custom monitors for Tripp Lite UPS?
OM6 - Windows Edition wth MSSQL 2005 as backend ??
Hello. I have come to the installation, and selected that I want to use MSSQL as backend. I have provided all the properties of database connection, but I get "unable to connect to SQL server" Why ? What kind of user i needed ? Do I have to use the SA account or can I use a Active Directory account ? Please help me......
Cisco Config File Manager
Hi, Can I setup what OpUtils backup: Running OR Startup config , and number of backup config.
feature request
Is a search feature in the plans for Oputils? I would be a great feature to have the ability to search for a dns name, ip address, or mac address and pull up all the applicable data associated to the search. Glenn Rowe
EVENT LOG RULES not applying
Hi, I DO NOT want to get an email notification to me saying if someone put a wrong password when logging on to the server (non-domain environment). I created a Rule under EVENT LOG RULES with following parameters so that the logon failure alert that has XXX in the DESCRIPTION would be ignored. Rule Name : Ignore Security Audit containing XXX Event ID : 529 Source : Security Category : Logon/Logoff User : Event Type : success and failure audit both selected Description contains string : XXX If incoming
Monitoring Windows 2003 Domain Controller
Can anyone tell me what we need to do to monitor a Windows 2003 Domain Controller? What services need to be running, does the account require administrative rights? I would like step by step instructions if at all possible. We have SMNP installed and WMI SNMP provider. We are still having some problems seeing some stuff. namely the AD stuff listed under AD STore, Network, Performance Counters. What else is required on the domain controller?
6016 linux installation/views
After installation a clean opmanager installation on a debian server applying the update 6016 and setting up the database at MSSQL we are running in to the following problem. If we click on a view for example Servers in the Infrastructure Views the devices are not showing. But we can find these devices back in the Quickconfig wizard. Also when using mapmaker we can select the devices who are already in the mssqldb then click on add and accept. the following thing that occurs is that the data is not
Hotfix 6016 released!!!
Hi All, A Hotfix with build number 6016 has been released and is available for download on our website. This can applied over build 6010 or above. The features/fixes included in this hotfix are: 1. Support for monitoring system resources using SSH Version 2. 2. Better performance following enhancements made in Data Archiving and cleanup. 3. Issue of database connection loss when running with MSSQL as backend database, is fixed. 4. Issue in monitoring MSSQL default instance is fixed. 5. Scheduled
URL Monitoring service down when its not
We currently have a number of URL monitors on one particular device. We're receiving alarms indicating that the URL is down because the host is unreachable. the error i receive is: 404: The server has not found anything matching the Request-URI. : http://206.196.121.13:42 However, when entering the URL in a browser, i'm able to connect to the site and i can even click on the URL link in OpManager and open the site. I've read a thread from december that seems to be addressing a similar issue: http://forums.manageengine.com/forumHome.do?forumGroupId=49000000002007&forumTopicId=49000002640193
SNMP Traps
Hi I'm sending traps from machine A to machine B. I can see in Ethereal that the packets (SNMP Traps) are arriving in machine B but how do I capture it in OPManager (OPManager 6 free). I've checked in 'Unsolicited Traps' but nothing is arriving. Can any one help me with this? Cheers
OpManager 7 MSP Version
When do you expect to offer a MSP version on OpManager 7?
Bulk event log rule entry
What is the fastest way to add a number of event log rules? Thanks, Colin
typos in LSASS System Monitors descriptions
System Monitors CPU Utilization This monitor shows the total percen processor time. Memory Utilization This monitor shows the total percen memory. should read "percent"
Installation help
Can opmanager be installed on a linux server that is not running X server. I usually install all my servers to have only commandline.
Non-Historical Change Monitoring
You have a 1 TB drive. You've set your monitor at 100 GB for a warning by email. Historically you use 1 GB per day, then one day consumption jumps to 80 GB an hour. Still, the current OpManager model won't let you know about this change from the historical usage to the current usage until you hit 100 GB. You have a CPU that hovers around 50% usage. You have your warning monitor set at 85% usage. One day the usage jumps from 50% to 83% and stays there. No monitor will alert unless it goes over 85%
Traffic Monitor Problems
Im having problems with getting OpManager to consistently record traffic monitor details such as Interface Rx Traffic and Interface Tx Traffic. I notice that when a device is discovered, OpManager may automatically assign traffic counters to it, but it wont start collecting data until I go into the traffic monitor, click edit, then click test monitor. Once I do that, sometimes the collection will continue and sometimes it will only record that one instance from when I clicked test monitor. This problem
unable to load MIB
I am unable to load ISA MIB file.
OpMan7 no default SNMP credential selected new device
Hi All, Is there a known issue where when adding a device into OpManager7, it will not select a SNMP profile to use? We use our own SNMP profile, it has been setup in the Credentials area and is ticked when adding the device. However, after adding the device and checking it, it will never select our(or any other) SNMP Credentials. Only "None" is selected. W2K3 Server SP1 OpManager 7 Professional Edition build 7001(registered Exchange & AD) Regards, BlueFire Corporation
probe : license upgrade
Hi , I�ve used trial probe to trial MSP product. My trial probe has expired after 30 days and to upgrade a new license i don�t any instructions. Do i have to reinstall the software? Thanks in advance windieana
Text console installation on linux
Is there a way to install opmanager to a text console only linux server since all our servers do not run X for beter utilizaiton or resources.
Running Database running on a Sandisk
Hi, I was wondering if I could install MSP central on one hard disk and the database on San Disk connected by fiber, I'm not talking about a second server, only I would want to use more external disk for my database. Thanks ! Martin
[OpManager MSP] - central and probe on same machine
Hi at all, I installed the msp central and probe on the same machine for testing purpose, both services starts without problems but i can't reach the probe console. I can't configure, for example, the monitoring intervals. I already seen into port.properties file but, by default, there are different ports specified. Someone can help me? Where i can look? best regards
Cisco 3524 Switch Problem
I'm having a problem that I'm only having on Cisco 3524 switches. I only have 4 of these switches remaining on my network and all 4 are showing the problem. What happens is on Switch Port Mapper the 3524 switches are always refreshing.
Cisco bandwidth monitoring
Hello, I have a Cisco Catalyst 2900, which I want to monitor. I have configured the following: - Imported the switch into OpManager - Defined the switch type Catalyst 2900 (on the right side: Configure Device Type)-- Set the SNMP to the correct values I clicked Discover to discover all the interfaces. This worked perfectly. But: when I add a Traffic Monitor, it does not measure the value. When clicking on the Test-button (in the edit-screen of a monitoring task), it does NOT give an error. But It
Collection Devices
Does OpsManager(or WebNMS) have the ability to deploy collection servers. We have several remote sites with thousands of nodes in each. Each site is separated by WANS and Firewalls and a distributed model with a centralized database would be ideal. Is this feasible, and is the deployment model documented?
Ticket Feature
We cueenrlty have ServiceDesk Plus for our ticketing system and opmnager is intergrated into it. Tickets are opened from opmanager in Service deskplus via email alerts. The new ticket feature does not seam to have the asset tracking or contract tracking parts that service desk does on the web demo. Are those features available? It would seem to me that would be an important feature for all MSP's We track our Manufacturer warranties and Open Linceses issued to customer equipment so that the renewals
The "getting up and running" story
Development team, I would urge you to take a look at Spiceworks and how the first ten minutes of usage works there. The one thing I find missing from OpManager (and Microsoft's Operations Manager is way worse at this) is the startup story. I want it to not only discover all of my systems, but help me sort through the events that are happening and categorize them. It should pick up on new events and ask me how I want to deal with them. Give me a choice to ignore, re-categorize, or leave it as is if
CPU Utilization
HI all I have problem with CPU Utiliziatio no metter waht i do i cant seem to get the graph % to work i have blue * which it means snmp is working. but every time i select test monitor it come back with didn not respond to test request . please any help
Next Page