Some interfaces can't be shown or added
Hi, On one of my Cisco Catalyst 2950-24SX after discovery I can see only 15 interfaces of 24. Rest of them present after re-discovery but can't be added. After query: update MetaTable set ENDTIME=UNIX_TIMESTAMP(NOW()) where lookuptablename = 'ifraw' and endtime=-1; 16th interface was added but not more. I reapplied query above again and again but no sucess Moreover in Metatable field with lookuptablename = 'ifraw' and endtime=-1 appears again. Please help
How to customise events !
Hi, How i can customize in opmanager for some events not to read or grap all the critical error .. or not to show or display as error on opmanager screen... For ex. I have print server connect to one of server, when ever any failure in print for one user report as error, which i can ignore. Similaly for the account lockout..., which i don't want to display on opmanager... Regards
Network map or business view
OpManager by default creates network map for routers and all connected networks. But I need to see links between switches and other network devices. As I understand I need to use Business View for this purposes. Is it possible to automate links location or I must draw them manually? Manual drawing is sophisticated because I have a quite large network. And I need to have information about connections. Where is this information stored? So, how such network map can be provided for me? Is there another
When typing in password no data is received
Hi, We have installed some probes on windows 2003 small business server, but if we type in a password for the domain then it say's data not available in the system resource usage. We are also having some trouble pushing the remote control to the servers and on the servers where we can install the remote control is very slow, is their a way to speed it up, think it is a problem with encryption, is it possible to disable that?
Custom WMI Monitors in 7.0
I have build 7010 installed and have tried to add a custom monitor. The process I have followed to reuse the disk.vbs that ships with 7.0 and add the following to /conf/application/HostResource.xml: <DATA-COLLECTION VERSION="1.1.1"> ... <POLL ID="Windows 2003" protocolClass="com.adventnet.me.opmanager.server.hostresource.WindowsPerformDataCollectionIfcImpl"> <CATEGORY ID="Detailed Disk Utilization" command="disk.vbs" parseAll="true" description="Monitoring the disk utilization in each partition on
CPU or memory Utilization not showing up
Hi, Problem: Monitors for CPU or Memory Utilization are not showing for all Switches. problem is that on same switch snapshot I have already configured to monitor CPU and Memory utilization, however snapshot is only showing CPU or in other switches it only shows memory. After I run a test monitors for memory utilization and looking back the dashport of that switch I can see the data as per attached file. However, after testing few other switches and moving back to the first switch configured I can
OpManager V6 Custom Login Shortcut Not Working on V7
I had created and used the following web link shortcut for quick (unsecured) access to a restricted business view user. <form name="loginForm" METHOD=post action="http://svdevmonitor.beckman.com/jsp/Login.do"> <input type="hidden" name="userName" value="web"> <input type="hidden" name="password" value="bci"> <input type="submit" class="btnStyle" value="System Status"> <input type="hidden" name="clienttype" value="html"> </form> In V7 it functions but the Business views are missing content. (See attachment)
OpManager 7.0 build #7010 - Apply without GUI in Linux?
Is there a way to install build 7010 without the use of UpdateManager.sh? I don't have a way to use the graphical interface and the server is remotely installed. Thanks in advance!
OpManager 7 -- deleting a server
For various reasons I had to delete the definition of a server, and then add the definition back in. The delete seemed to work, but when I add the server back in it says the device already exists. But I cant find the device anywhere! 1. The network view doesnt show all devices on the subnet, even if such devices show up under servers etc. How do you force the network view to update? 2. How do I clear the problem of a definition that exists, but doesnt seem to show up anywhere? Thanks Nick.
Opmanager 7 -- not able to delete a monitor
I added a server, and added a monitor on a disk partition. I set a threshold, and an alarm was generated because the threshold was violated. Subsequent analysis showed that I should not have been monitoring that particular partition. I deleted the alarm, and deleted the monitor. However, the monitor refuses to remove. I dlete it, but the redisplay still shows the monitor. And it is still monitoring -- it is not some ghost. How do I delete this monitor?
Wrong "time" after upgrading 7010
Hello, Today, i installed the 7010 Upgrade on my OpManager. After the installation was successful, some parts of the text were wrong. For example: Before the upgrade in the right above corner at the "Home" page of my OpManager, there was the option "last 12 hours", "last 24 hours" and so on. But now there is only webclient.reports.timeframe.last12hrs webclient.reports.timeframe.last24hrs webclient.reports.timeframe.today webclient.reports.timeframe.yesterday webclient.reports.timeframe.last7days
Icons missing on new Business view
When I create a new map in version 7 I can place the devices on the map and change their icon to the device icon but they do not show on the screen after you save the view. When you go to the new business view it shows the number of devices but the icons do not show on the map. The really weird part is if you cannot see the devices on the map but if you mouse over the map the details of the device pops up. I even tried giving the map a background image and that shows but the device icons do not.
n00b question, Please help !
Hi all, Its my first time here. I wonder if someone could point me in the right direction. I have setup email notification to alert my when disk space is low on a business view or servers. I get the alerts but the thresholds are wrong. I want it to alert me if there is less than 1gb free, Could someone tell me ehat to put here: http://i12.photobucket.com/albums/a239/londonzombie/opman.jpg Thanks in advance Mark.
Business view
Hi, In opmanager 6 we could put a besiness view as a home page, can we do it in OpManager release 7 (7010) Thanks a lot for your help
OpManager 7 -- scheduled reports are blank
I installed Opmanager 7004, and scheduled reports were all blank. I upgraded to 7010, and now some reports have data, but some are still blank. In particular, Server_Least_Volume is still blank. Thanks Nick.
OpManager Weblogic Trap parsing
Hi I have installed OpManager under Redhat. All is fine but I am having a nightmare with trap receiving. I have loaded the BEA WebLogic MIB tree which works fine in the MIB browser - although it takes a while to generate and Firefox alerts with a script error. I am receiving traps form a monitored device in unsolictored traps. Specifically Server up and server down traps. I have tried to assign the traps as those from the MIB tree and also as customised specific ones (see below) I have created a
Numerical Dial
Hi. How can i customize a snapshot dial to be numeric, as the connection count in the firewall snapshot?. I have tried to copy the configuration for the firewall dial in opmanager_snapshot_dial.xml for a custom device type that i have created (ironport C100), but the dial that i get is a pie chart with a percentage, like the disk usage dial. This is the dial for firewall: <DIAL name="DiskUtilization" displayName="webclient.devices.firewall.activeconncount" dialType="pie" shortKey="DISK"> <PARAM type="Cisco
Consecutive Times >1 in New Device Template trouble
OpManager 7 free Device Template New template based on Microsoft and Domain Controller I can not setup any Consecutive Times except 1 for CPU and Memory WMI monitors in new Device Template Thanks
Error: webclient.fault.alarm.clear.status.failure
I get the above error while trying to clear an alarm on a node. No matter what I do, I can't clear the alarm - I always get the above error message. If I try to delete the alarm, I get "Problem in deleting alarm!". I don't want to remove/re-add the node because I don't want to lose the stats. What can I do?
Map Detailed View Flag Icons
I have OpManager 7 installed on RHES. When i look at Map and detailed view every memory, cpu and disk flag is grey (see attached). Should these be coloured depending on the status? Anyone else have this?
Domain Controllers Add-On Expired?
So, the Domain Controller add-on was in the trial version of OpManager 7010 I was using. I applied my license to OpManager which doesn't include the DC add-on. Now when I click on domain controllers I get the message "Active Directory Monitoring Add On Feature is not licensed." Okay. But that is all it shows. What happened to my normal panel for this system? I used to (in 6) get just the normal display. How do I get that back? David.
OpManager not successful at polling nodes via SNMP
I just installed 7 on CentOS 5. Discovered the nodes ok, but OpManager isn't polling the nodes successfully. I have monitors configured, but they don't report anything, so I tried to test the monitor via the GUI and it reports back "The monitor did not respond to the test request". I tested the same OID in the MIB browser, and it worked fine. I then checked to make sure the credentials were the same. I checked and rechecked a bunch of times, cut and pasted the community I entered into the credential
Seperate forum for Opmanager MSP?
I think it would be great with a seperate forum for Opmanager MSP?
Downtime Scheduler
Is it possible to use the downtime scheduler on a monitor in a specific device or is there another way to go around this problem? If it was possible to create a dummy device i could add the url monitor i want to that device and include the device in the scheduler, but it seems its not possible to create a device that doesn't exist. The url monitor option under admin would be a solution because its possible to add those to the scheduler, but on the other hand i can�t connect any notification profiles
CPU and Memory Utilization dial contain no data available
Hi there, I added a custom device template for my machines (win2003server). After I applied the machines to use this template, the CPU and memory utilization dials has no data available, whereas the rest are fine. When i switched back to the default Windows 2003 template, the dials appear again. Any idea? Thanks Robby
Event Log rule
Hi, We have the 'Any System Failure' rule on. However there are a few system 'failures' which are not (like RDP printer driver not available etc.). Is there a way we can apply an extra filter. I want to have the 'Any system failure' on but would then like to choose ones to filter out and not get notified about. What can be done here. Thanks Opus
OpManager7-Hotfix
Dear Users, For OpManager 7, kindly apply the latest hotfix(7004) for the below related issues. # Discovery related issues. # Issues leading to 100% CPU usage by OpManager. # Unable to add URL monitors from the device level. # Threshold configuration changes made in the Device Template for Free Diskspace monitors fixed. # Discards/Errors rate calculation issue while checking threshold. # Traffic utilization going above 100% in alarm messages. # Issue in showing traffic graph in the interface snap
Collecting log data to view history not working.
Hey, I have migraded from MsSQL to MySQL using this guide: http://support.opmanager.com/sd/AddSolution.sd?solID=1204 Averything seems fine but the data collecting feature of opmanager. I can see current status and all alarms from the past but I can't see any information on when a specefic server is up and the aount of traffic flowing through a interface. See these picturures:
deleting Alarms
Hi when I try to delete alarms I get Failed to perform the operations for the following objects. Failure Object Reasons 1 IF_DISCARD_936 false But, the operation is successfully completed for the following objects. Failure Object 1 IF_UTIL_281 2 xxx.xxx.xxx.xx_Poll 3 IF_UTIL_800 4 IF_UTIL_309 5 IF_UTIL_310 6 IF_DISCARD_293 7 IF-172.16.1.9_Poll 8 IF_DISCARD_911 9 IF-172.16.1.2_Poll 10 IF-192.168.7.2_Poll 11 IF_UTIL_290 how do I correct this problem? Thank you Ramzi
Custom Infrastructure Views and Exchange monitoring
We have just upgraded to OpManager version 7, and I have to say that it is a great improvement over 6. Problem: When I create another Infrastructure View for mail servers, and I move an exchange server into that category, the exchange dashboard view disappears from the snapshot page for that server. This is a problem because we really want to use the infrastructure views to categorize our servers. Is there something I can do to enable this? It also seems to be the case with the MSSQL monitors.
promt for proxy login
Everytime I click on the "Tools Home" I gat promted to key in my "proxy" username and passowrd. I have upgraded to my profession edition so I don't understand why me moving around in the software requires me to connect thru my proxy server to your site.. for some sort of hidden "monitoring" of your software like spyware.. Can this be removed or disabled???????? John Gartley
Subnet lists
We currently are using UTN connections to all our major nodes within or Network. I'm trying to get a list of all our used subnets, would be nice with the description field for each subnet off the router or switching device when found if possible or even the interface identification. Can this be done and if so please send me how too, I'm doing an evaluation of the product. Richard Weigel
Google maps
Hi, Finally the upgrade pack is here :-) For the moment I have two questions: 1. Is there some kind of manual to create the google maps within op manager? 2. If I have registered the wrong google map api key into op manager can I reset it? Regards Stefan
OPManager database problem
I ran repairDB.bat andd got following responnse: ============ myisamchk: MyISAM file ..\mysql\data\OpManagerDB\alert.MYI myisamchk: warning: 1 clients is using or hasn't closed the table properly myisamchk: MyISAM file ..\mysql\data\OpManagerDB\devicetoeventlogrulemap.MYI myisamchk: warning: 1 clients is using or hasn't closed the table properly myisamchk: MyISAM file ..\mysql\data\OpManagerDB\event.MYI myisamchk: warning: 1 clients is using or hasn't closed the table properly myisamchk: MyISAM file
Extreme Networks - No performance monitors
We have the following extreme networks equipment. Black Diamond 6808, Summit 400 and summit 450. All set to Vendor = Extreme, Category = Switch, Type = Extreme. When I look into the Monitors all I get is Drop Events Statistics SNMP Monitors the statistics of drop events Jabber Packets SNMP Monitors the Jabber packets Number of Fragments SNMP Monitors the number of fragments Oversize Packets SNMP Monitors the oversize packets Packets Received SNMP Monitors the interfaces packets received Packets to
Custom Monitor / Device Template problem
Hello all, maybe i understood something wrong, hopefully you can give me a hint: We have several Windows 2003 Server. All are Dell Servers. On One of this Servers there is a Lotus Domino Server installed, on others are other Systems running. Now we have a device Template for Windows 2003 Server. This Device Template does not hold the monitors for Lotus Domino (which is running on some of this servers, not all). If we create a Custom Device Template now for our needs in monitoring the Lotus Domino
Threshold can not be deleted ...
Hello all, How can i delete a threshold rule for a monitor at a special windows 2003 device? I tried deleting the values in the filed "Threshold Alert" and "Rearm value" and hit OK. After reopening the Threshold setting nothing seems to be changed, the old values are still set and it still says "violated". Regards Jenson
Changing default monitor times for CPU ect.
In version 6 I was able to change how often monitors like CPU, Interface traffic and memory were monitored. I do not see that in version 7. I had custom setup times for common resources and they did not get migrated over, where do I go to change them? Also I noticed that all the thresholding alerts that were setup for all my devices are no longer there, it looks like those did not get migrated over.
Custom (WMI) Resource Monitor
Hi, I'm currently on OpManager 6 and have a question about creating a custom resource monitor. I have a script that counts the size of certain folders and then returns this to opmanager (just like other scripts I have created in the past using WMI). My question is: what is the timeout value when calling a script for a custom monitor (by custom I mean one I have created myself by editing the appropriate XML files and writing a script.) The folder size command takes quite awhile to run and I think
Business view not show data
Hello i have one problems with business view the problem is that some images not show data and this damage report and not show devices,
Next Page