OP Manager MSP Edition manual
I am just getting started using OP Manager MSP Edition. From my limited use/experimentation, it looks like the MSP edition has some significant differences from the non-MSP edition. However, I can't seem to find a user guide/manual for the MSP edition. One example of something I am trying to do is configure thresholds on a device type. The demo on how to do this (http://manageengine.adventnet.com/products/opmanager/howto_demos/threshold_config/demo1.html) differs from what is available to me in the
MSP 6005 -
I'm evaluating MSP at the moment. Getting my head around most things but I'm getting this error; Selected asset is not scanned yet When clicking anything under Device Info on the Device Snapshot page. SNMP is running and working on the devices. I've had a look through the knowledge base and forums but can't find anything. A hint in the right direction would be nice!
No error append using 'a Run command notification profile'
if an error or event occur, opmanager triggers my program to run but my program does not receive any error message with it as argument. the check boxes: 'err append' and 'append' are both checked. i tried it with a batch file, a java program and net send command but without success. what could be the problem ? I'm running OpManager 7 Build 7021 (trail version) thanks, Rogier
Hostresource.xml documentation for parsing output?
I've had a search and I can't find anything. I've modified Shawn Jefferson's vbs script to check the value of the MS Exchange IS transport temporary tables (emails get occasionally stuck in here). Across two different servers the output of the script varies and I need to take the TempTableCurrent values reported for each server and monitor this with a threshold across intervals. Is there any documentation for the hostresource.xml syntax I could use to parse this output : Cheers, Paul. Server1: Microsoft
Information Store Mailbox Logon Operations per second
This is one of the standard Exchange monitors, and it's doing the same for all of the exchange servers I'm monitoring. For some reason it seems to be acting perhaps as a cumulative counter, since the installation of the trial the value has just grown and grown. The current value it tells me is 163,000+ logons per second - no way could the box do/is doing that. When I run perfmon and look at the value there, I am peaking at 3 logons/sec mostly at 0. The SNMP OID in question is : Exchange.ISMailbox.LogonOperationsPersec
MSP Probe 6005
Hi Question!! You can Unmanage everything but can you unmanage a PROBE? Have given Raja some topics when he was visiting me, Is there any solutions off thus topics?
Can not remove alarm...tried all the tricks
One of my W3K server snapshots has a windows event alarm that will not delete (or show details which is just blank on clicking link) I am quite used to clearing ghost and stuck alarms in the three weeks I have had opmanager but this one got me beat. Have... Show alarms - select - clear and delete - just get blank Show alarms - delete all - just get blank page. deleted "event" rows for source via mysql. Strangely it does not appear. (So what table is it?) Changed IP to force alart aka clear ghosts
Updating device templates
When I update a device template and apply it to servers, the servers dont get updated. :(
OpManager 7 fails to start
Hi, OpManager is failing to start. The errors which I get is, "Oops looks like a few tables are corrupted" Run RepairDB.bat from bin directory and restart the server. I have that option and now I have another problem where it will not start fully. Have DB errors now. I have attached the errors and messages displayed. Would appreciate if someone could help. Thanks
OpManager7.0 : Alarm Messages
Which feature that I must remove, if I don't want this kind of alarms : Traffic Utilization for Interface ** to NODE ** is 100%, threshold value for this monitor is 65% Errors rate for Interface ** to NODE ** is 1.106%, threshold value for this monitor is 1% Errors rate for Interface ** NODE ** is 1.106%, threshold value for this monitor is 1% I unchecked all "Interface Templates". By the way... How to remove ALL thresholds (Error and Discard) for all interfaces in one operation from "Admin/Interface
No RX and TX data in two interfaces
Hello, I use OpManager7 and I am getting no RX and TX data in two interfaces however I did get it with OpManager6. Is there anything I can do? Regards, Manuel
Even more trouble ;)
Hello The last week and this week i tried to send a support ticket to you but somehow it didn't work. I tried to attach the Support Information File but after the upload it always displayed "No files uploaded". So i'll post my problems here and attache the Support Information File. 1. Interfaces cant be added to a device The interfaces are discovered when i click on "Rediscovery" but if i want to add them OpManager sais "Interfaces added succesfully" but i dont see the new interfaces in the device.
Alacatel Switches --> Mibs?
Hello i tried to get these two mibs (Attachment) working because i think OpManager doesnt know how to handle my switches. But after i've uploaded them over the mib browser i get the following errors: Error parsing MIB:ADN-ENV-MIB.mib Exception while loading MIB:Could not parse the file D:/OPMANA~2.0/OPMANA~1/./mibs/ADN-ENV-MIB.mib Couldn't resolve these MibNodes : { adnEnvHss } and the second one: Error parsing MIB:ADN-MIB.mib Exception while loading MIB:Could not parse the file D:/OPMANA~2.0/OPMANA~1/./mibs/ADN-MIB.mib
Network view incomplete
Using 7021. My network view for a subnet does not show all devices on that subnet. Any way to fix this?
Event Log Rules Not generating alarm notifications.
Hello, I ticked to be alerted some event log rules and also created a few, such as Event ID 9539 for an Exchange Store dismounting. I left all the other optional fields empty. I triggered this event by taking a store offline. Event though I have the check boxes selected in my notification settings, I'm not getting alerted. I can see the events in the application log. Am I missing something? Other alerts such as thresholds are working. Thanks,
to fetch Managed Object
Upgraded to 7021. All was working. Added some new servers. Continued to get reports and alarms. Went to look at a server to deal with an alarm, and got 'Unable to fetch Managed Object details for the object '. I now get this message for all servers I try to look at. Is this a 7021 bug? A database corruption? Something else? How can I fix this?
WAN Monitors - IPSLA - Working?
Hi, Has anyone been able to get this feature working correctly ? I have gone through the guide, but sill no joy. Anyone else have problems and get them sorted? :cry:
Number of users accessing
hi, i wanted to know is it possible to keep account of users accessing our application throught opmanger. and one more thing can we keep a track of the data base ... is it increasing and how much. thanks anish
Problems Right Off From The Start
I installed OpManager 7 today on my test server that is running Server 2003 Standard Edition, SP 1. I logged on locally as the local machine admin that has FULL RIGHTS to the machine. I installed and everything seemed to install normally. Now, when I try to go in and execute the application, it won't start. Finally, I get the error: 'OpManager is already using the WebServer port XXXX' I read through and saw that I needed to go in and run the ChangeWebServerPort.bat. I did that, still got the same
Memory Utilization Report Shows Negative Values
I have setup the daily report Memory Utilization to be emailed to me and on only two of the servers it shows negative values - (picture attached) If I test the monitor it works fine. Any ideas what's causing this?
Migrate current OpManager Installation to new hardware
I am wanting to migrate my existing installation to a new server and maintain my existing database. I am using the built in MySQL database on my current installation and want to continue to use it on the new installation. Is it possible to install on the new hardware and move my existing data to the new server and not have to re-register? If this is possible, how can I do that?
Device Availability Wrong
I have two devices that are reporting 0% availability although they ping from OpManager 7 and are collecting disk, cpu and memory stats ok. Just the availability is zero. It looks normal otherwise. Has anyone else seen this? thanks, Lerwick
Interface Not showing in Device Dashboard
Please see screen shots in the attached document. The interfaces appear in various screens but NOT in the device dashboard. This only happens for a few devices but we need it fixed. mark
Custom octets ?
Hi I'm a newbie about opmanager. I want to monitor a custom field like Interface octets. this field is defined by counter32 type and the value is increasing continuously. I defined a new monitor using expression. .1.3.6.1.4.1.2021.255.1.3/$DELTA_TIME but its result only represent (CURRENT_VALUE / $DELTA_TIME). How can I get delta about OID values?
URL Monitors don't show up
The Url monitors don't show up under the URL view. It says "No URL Monitors found in the database". However when I go to Admin and Url Monitors they are there and we continue to get emails when it hits its threshold. How can I get the Url monitors to show up in the infrastructure view?
Change device from domain contoller to server category
Hi, My v6 license does not include AD monitoring. My AD servers are discovered as domain controllers. I am not able to change the category of the domain controller to server. When I select any of the domain controller, there will be a status message showing 'Active Directory Monitoring Add On Feature is not licensed'. This has prevented me from monitoring all servers detected as domain controller. In v6, I will be able to view the device property page and change the category to server so that I configure
Managing client sites with Opmanager
I'm new to Opmanager. The company I'm working for is looking for software that can monitor the client sites they are working for. Is it possible to install Opmanager at our office and discover the client networks. I can discover the client routers but need to be able to get behind the routers to discover the devices on the client's (private) network. If this is possible where do I find instructions on how to implement? Thanks Paul
Adding monitors
Hi all, I'm trying to add some monitors to the OpManager 7, and not finding the right way doing it. The case is that I want to monitor MySQL cluster which runs on Linux Server, so I though to create a new Template "MySQL Cluster" which has the Linux System OID + my custom monitors. this could not be achieved as the OpManager reject the System OID since it's already associated to Linux. So please help me simply to add more monitors to any server NOT through the template since it will then add my custom
Issue with scheduled report
Hi, I'm trying to use in the scheduled report the publication through an URL. I set in my web site an area to receive reports but when I try to put the url and click on next button I got a message asking me for an valid email adress. Maybe I'm wrong how to configure the url in OPManager (OPManager 7 build 7021), so can you tell me what exactly is the syntax I need to put in the field. What are other requirements to publish these reports in separate web site. Thanks for your answer Regards Philippe
Monitoring Overheads
I was just wondering what is the overheads of using opManager to monitor switches and servers? Someone told me that to monitor the amount of traffic over a port on a switch it almost doubles the amount of traffic required. is that true? or does it just get a reading of the amount of traffic that is crossing the port at that time? Also what strain would be placed on the systems if i was to increase the monitoring from 15 minutes to say 5, would this give me a more accurate reading of the amount of
Event notifications
Propective new user: My company is planning on acquiring OpManager software. I have a question concerning event notifitications Are Event notifications in OPManager only done via email? Can notifications be sent via pager, blackberry, etc? Ron Pennell
Domain Controller has status of crical but no alarms.
I have a dc that has a status of critical but no alarms. How do I clear this?
Importing devices into OpManager
Hi there, Does anyone know of a way to import devices and their details into opmanager without having to do a discovery or manual adding? It would be nice to be able to import from csv or something so that devices can be automatically categorised and configured without having to do lots of post configuration once devices are discovered or added. Any ideas? Is there one particular SQL table that can be modified or are there several joins that need to be populated? Cheers! Ben
Problems adding devices/Devices partially added or removed
Hi there, Im having issues with devices that are partially added or removed and I cant seem to fix the issue. I have run the sql queries to remove any old entries but it still doesnt work. I've also tried running the delete wizard but the device is not found. Any ideas? Have there been any updates to the delete scripts lately that i am missing? Thanks heaps, Ben
Business View placeholder icons
Allow unmonitored icons to be linked in business view, Ex.: An unmonitored hub have a link wich I want to see, but i cant add the hub in Opmanager (not manageable)
Webserver port 80 is occupied
what do i do when the ops manager console wont come up when i get the error Webserver port 80 is occupied change the port by executing bin/change Webserver script
Can't delete part of the infrastructure snaphots
After the upgrade from 6 to 7 it's not possible to delete the options Routers Servers Switches Desktops When i install OP7 as a new installation, i can do it. Please advice
install on Debian Etch
so, followed the install steps - same as guide here: www.debianadmin.com/monitoring-serversnetwork-devices-with-opmanager.html to install on Debian Etch. Install went off fine, but running StartOpmanagerServer .sh I got an issue with setEnv .sh not being found. I changed the path in StartOpmanagerServer .sh to point to setEnv .sh directly, and now the server start ... sort of. It takes about 15 minutes of just sitting there to kick off MySQL, then "inside addon check" appears, then nothing..... any
Monitoring NIC Teams?
What I am trying to do is monitor the NICs within an NIC team on an HP server. Pretty much all I want in to be notified if one of the NICs fails or loses connection. Ufortunately I see now way that this can be done, or am I just blind? Thanks
CheckPoint Firewall - No Data Available in Snapshot
I installed OpManager v7 and monitor Nokia CheckPoint Firewall, but Snapshot Graphs show "No Data Available" in CPU utilization, memory and connection. What's the problem and how to fix it
Next Page