Multiple time periods per notification profile
You should be able to define multiple time periods when a notification profile is applied. Currently it is not possible to define easily that a profile is applied night time during week days and the whole weekend, i.e., Mon-Fri between 1700-0900 and from Fri 1700 to Mon 0900.
Traffic Counters
What is the difference between 32 bit and 64 bit traffic counters? Why would I choose one over the other?
STP, RSTP, MSTP management.
Hi everyone, I know that OpManager can chart the STP state of ports on a switch, however what would be far more useful would be to map an overview of STP(or RSTP/MSTP) on the network (display which ports are blocking and which are forwarding and if there are any loops). I know LoriotPro has STP Management, sadly it does not support RSTP or MSTP. Is there any hope the OpManager team would consider implementing this feature or can someone point me to another tool that would give us a network view of
Switch Ports down not reported on main device
Hi, I have recently create another installation of OP-Manager on a new server pointing to a backup of the original DB based on the informations taken from this forum (mirror the original system for backup and test purpose). This is needed in order to understand the impact of the migration to v8 for the production environment. I have enounter an issue with a switch device. I have multiple port down (no cable connetced). In version 7 these are monitored and reports as down. In version 8, the same ports
URL monitoring now working
Hi, I had this topic opened before but now I am running version 8002 and the status is the same. I had tried to add a URL of an internal site to be monitored and there is no luck. There are some which are working fine. last time you asked me to try just with one and send you the LOGS. - URL Monitor Name is: Cognos; - URL Address: http://cognos; - All otehr parameteres are not changed and the message is: Data received from:http://cognos The URL http://cognos is down, Reason : Host Unavailable
Issue creating a trap processor
Greetings, I am attempting to create an SNMP trap processor from the following trap so that I can be notified when our UPS loses utility power but am having no luck. Here's the trap: No Trap Parser defined for received trap: Enterprise: lgpNotifications Generic Type: 6 Specific Type: 2 Variable Bindings: lgpConditionId.151: 151 , lgpConditionDescr.151: .1.3.6.1.4.1.476.1.42.3.2.1.70 , lgpConditionTime.151: 213 days, 3 hours, 10 minutes, 56 seconds. I can't seem to catch this specific trap. I
Opmanager 9 unable to parse syslogs.
We are using Opmanager 9 and have a syslog-ng setup to forward to our opmanager installation. When in the admin, syslog rules, tab we have setup an alarm. We can watch the logs being received though the "Syslogviewer" action. However nothing is sent to the alert that works for everything else. Any ideas would be greatly appreciated.
after SQL conversion Opmgr service stops
I just converted Opmgr from Mysql to SQL. After the conversion the Opmgr service doesn't start automatically. If I start it manually then try to logon to Opmgr I get 500 Internal Server error and the service stops. The conversion process seemed to go OK. However during the DB restore there were some warnings, but no errors. At the end the restore reported that it completed successfully. We're running Opmgr 8020 on Windows 2003 SP2 English. Attached are the warnings and the only error I could find
Failed to establish connection with web server. Gracefully shutting down OpManager
I'm getting this error when trying to start Opmanager. I already check the lib files & they are OK. What else could it be. No changes were made & it just stopped working. Already restarted & no go either.
OpManager EE Central not starting up....
Downloaded ManageEngine_OpManager_EE_Central_Linux.bin and trying to set it up on my CentOS 5.3 Linux server. Installed without a problem, however when I want to start it, the following happens. Any idea on what's wrong? [root@devilhole bin]# ./StartOpManagerServer.sh This evaluation copy is valid for 29 days inside addon check Unable to start Mysql daemon Unable to create database Exiting OpManager
disk usage of windows mount point
I have not been successful in monitoring a windows disk that is mounted to the file system. It sees all the drives that have letters, but it will not see the ones setup for a mount point. Is there and option to do this or can I add a WMI monitor that would allow for this?
OpManager 8 Lost Network Connectivity
We have installed OpManger 8 and have it running successfully on a windows box but we require it on a Linux box. I installed and set it up on a Linux box but with encountered them problem bellow. This message appears in the "Recent Alarms" widget. "OpManager has detected that it has lost network connectivity and has suspended all monitoring. Monitoring will be automatically resumed once connectivity is established." It is not polling servers I have added. I put both my screens side by side (Windows
Communication with the Central Server is down
Hi The server that we have MSP Probe running on did an automatic restart after installing an IE7 update. Since then it is no longer working. The server is up and working, but MSP doesnt seem to start anymore. I have removed the update and restarted the server incase it was something to do with that, but still no joy. When i clicked on Start Server under MSP Probe i got the following message opmanager.startup.tcpport 1104opmanager.startup.tcpportOccupiedMessage Any ideas what that means and how i
Can't Rediscover interfaces
Hi everyone, We're using Opmanager 8021 and monitoring a lot of devices. All are well except for one. We have a server that has two network cards, on two different subnets. Op Manager can detect one card, but no information on it. The other is undetectable, even though the two subnets CAN communicate with each other. If I try to run the the interface tab, it immediately comes back and says " Unable to rediscover the interfaces." When I run the test credentials, both WMI and SNMP respond with "Passed".
ManageEngine alternative to Solarwinds
Hello, I'm trying to find an alternative to Solarwinds products. I have seen ManageEngine product and in particular OpManager and DeviceExpert that could replace NCM and NPM. I have two question about those products: is there something in the ManageEngine portofolio that can replace APM (Application Performance Monitor) in order to monitor the application installed on machines ? can the ManageEngine product be installed on the same machine and can they be integrated like the Solarwinds products
Error parsing MIB:PowerPlus.mib
Hi, Please assist. I'm running OpManager 8 as a demo for testing, and my company is willing to purchase. The only problem is that i get the following errors when i try to upload the mibs for our UPS: Error parsing MIB:PowerPlus.mib Exception while loading MIB:Could not parse the file C:/PROGRA~1/ADVENT~1/ME/OPMANA~1/./mibs/PowerPlus.mib. The error occured at the line no: 892 ,column: 17. 1. The keyword 'ACCESS' or 'MAX-ACCESS'may be missing. or 2. The keyword 'SEQUENCE OF' may be missing. or 3. The
Huge filesize of in mysql/data
Hello opManager support, on my opManager server I have a very huge (<100GB) file with the filename "checked". Obviously it's needed by opmanager, but it's way too large. A web search on "mysql file checked" or other variations doesn't work - too many false hits. Do you have an idea how to shrink that file to a more reasonable size? TIA GWeiss
SSH
Hi, I am trying to configure SSH so that i can monitor resource usage on our Linux servers but all that happens is that it connects and does nothing. It doesn't even start the initial key exchange. Can you give me any pointers so what I am doing wrong? I have turned on debugging on the Linux box and all that happens is a connection to port 22. Regards David Scotland
Disk Utilization is way off
This is what OpManager tells me : Used Space : 2728 % This is what i get if I run a df -h on my server that OpManager it checking Filesystem Size Used Avail Use% Mounted on /dev/mapper/VolGroup00-LogVol00 1.6T 51G 1.5T 4% / Anyone know what is wrong, seems to be the problem on all my Linux server (CentOS 5.3) Monitoring using SSH on OpManger.
MS SQL 64 bit support?
Running OpManager 8 hotfox 8021 Does OpManager support 64 bit MS SQL? I get error: "80041010 - Specified class is invalid. I did prevous OpManager installations and with all adding SQL monitoren went succesfull. All were 32 bit MS SQL.
Adding new category in Device Templates
I have a temperature monitoring device that I would like to add to OpManager v8. I've got the MIB from the vendor and was able to successfully upload it into OpManager. There is no category in the Device Templates for this device and I could not locate anywhere on how to create a new category. I was hoping to at least classify this as a network appliance. Thanks.
Active Directory
Hi all, I'm monitoring Active Directory on 2 DC's. For some reason, the first DC is working fine apart from the AD store dial telling me there is no data available. The second DC's AD store dial is working fine but the majority of the other mornitored process etc are displaying as n/a even though the WMI and SNMP credential check both pass ok. This DC is also a VM machine. Is there any reason why this might be happening? Matt
URL Monitor -> Threshold Settings?
Admin -> URL Monitors -> Click on existing URL monitor name -> Click "Configure URL" in upper right -> Click "Threshold Settings", and then click "Enable Threshold" Now an area called "Threshold Settings (optional)" comes up. How do these values apply to a URL monitor exactly?
Zoom-function in maps
Hi, Don't know if this i the right place to post, but I'll give it a shot. It would be very helpful with a zoom-function in the mapview. As it is now i have a lot of links in one of my maps and they get all cluttered up. Regards Mathias!
ESX 3.5 Servers Not Adding Correctly
Hi I have installed Opmanager 8 and have set up WMI - SNMP and SSH (using : : # for VMWare) (test SSH with Puty and User Details work ok) The Auto Discovery has found and says added the ESX Server, but these do not show up. If I try and add these manually OpManage says these are 'Entries for the device are either partially added or removed' Any ideas Thansk Graham
Google Earth Integration
Attached are 2 files that I use to display Opmanager status in Google Earth for our big screen in the NOC. NOTE: OpManager database must be accessible either locally (mysql.sock) or remotely via tcp. see posting h$$p://forums.adventnet.com/viewtopic.php?p=3947#3947 My OpManager install has some custom fields in the CustomFieldsForDevices table. These are added in gui in the device notes tab. Icon images are from the /OpManager/webclient/devices/images/ directory. To use these, they must be copied
Where is the google map stored, want to add overlays like weather.
Is the google map stored on the local OpManager server? I would like to add some overlays to it like weather radar which can be done on the maps.google.com site but I do not see my OpManager map under my google account. If it is stored on the OpManager server would it be possible for the developers to make it so we can add overlays? Thanks! Kevin
"Utilization" monitors not returning data
I've just installed OpManager 8 and am having issues with getting data to display in any of the "Utilization" monitors. We cannot run SNMP, so I am usign WMI. I test the credentials and they work, and I can do a test adn it brings back WMI data. But OpManager doesn't seem to want to do it on its own.
Size of a file
Is there a way to monitor a file and notify when it reaches a certain size threshold.
Build 8021 OpManager Client Login Screen displays "OpManager 7".
After successfully upgrading from OpManager v7 to v8 (Build 8002), I upgraded to Build 8021 by installing SP2 and HotFix 8021. Then I noticed that the Client's Login Screen displayed "OpManager 7". However, after logging in, it correctly displayed "OpManager 8". Anyone else have this issue?
Combining other ManageEngine products on same server as OpManager?
Hi, I'm wondering if there's any documentation regarding, or if other users have experience with combining OpManager and other ManageEngine products on a single server. Specifically I am thinking of OpUtils, Password Manager Pro, ServiceDesk Plus, and maybe even Desktop Central down the line. But if there is a general matrix of what can & can't be combined within the ManageEngine products, that would be very useful. I know OpUtils has its own trap receiver, which obviously would conflict with OpManager's
Domain Controller categorizing
I want to monitor one of our Domain Controllers as a basic server. Everytime I change the category to Server, Opmanager switches it back to a Domain Controller and redefines all my monitors. Can I tell it somehow not to redefine the category? If not, can I disable the use of the Domain Controller category? Thanks in advance.
How do you use Device Templates for servers?
For servers, specifically Windows servers, that you are monitoring for both Windows WMI items and hardware SNMP readings what kind of device template do you use? I want to monitor a Dell PowerEdge server running Windows 2003. I started to setup a Dell server template with Dell SNMP monitors, temperature readings, raid status, voltage reading, etc, but when I apply it to the server I lose all of the Windows readings, disk space, memory usage, etc., and the server does not have the Windows icon on
Per-user business view filtering still allows users to see stuff not in "their" business views
Hi, I have a non-admin user account that can only see certain business views. However, when that user clicks "Maps" on the toolbar (just the word "Maps", not any of the Business Views in the little window that pops up) they can see a complete list of servers, including ones outside of their own business views. If they try to view a server from a different business view they are told "You are not autherized to view this device details page", which is fine apart from the spelling mistake. However,
How to change title of pdf file？
hi，support team How to change title of pdf file by custom information?for example，from ' MnageEngine OpUtils 5 oputils ' to '***custom name' and pdf foot infomation from 'http://www.oputils.com' to 'http://www.*****.com' thanks
OpUtils - how to export all subnets?
I have an eval version of OpUtils installed and I'm wondering how to get all 200+ subnets I've mapped with it exported. I've found ways to export various aspects of the network but there doesn't seem to be a way to see all of them all at once. I go to reports under IP address manager and it only shows 58 of the total subnets??? This seems to me to be a very basic function - I'd really rather not have to dig through each of the six areas in the network, export each individually, then try to merge
libstdc++.so.5 missing from OpenSuSe 11.1?
I'm loading OpUtils on Open SuSe 11.1 and the firebird portion of the install is fussing about a missing libstdc++.so.5 library. I find libstdc++.so.6 present and I simply copied it to the other file name, hoping to provide the required functions, but the firebird install checks specifically for versions by calling functions. Is there a tidy way to fix this? I'm a FreeBSD guy and I can get around YaST OK, but I'd really rather not have this be a day long adventure and I can't be the first to
Stop monitoring multiple interfaces of a devce
Hi, I have OPManager monitoring my switches, routers, etc and I dont want to constantly monitor all of the interfaces. Is there a way I can stop monitoring the interfaces without having to go into each one individually and unchecking the monitor this interface box. I'd rather not delete all the interfaces in case I ever want to start monitoring any of them. The database is running on a Microsoft SQL server so if there is a field I can change the value of here I can script a job to do it. Thanks,
Trial Period after 8020 update
We installed SP2 for OpManager build 8000. After upgrading to build 8020, we have a yellow banner at the top of the OpManager stating that our "trial period will expire in 281 days." It wasn't there before. Is this normal? Is there any way to eliminate this message? Info: Win2K3 SP2, SQL2005, OpManager Premium build 8020
How to backup OpManager config?
Hi I see that there are some new scripts in the latest release; BackupConfFiles.bat backupDB_Config.bat. However I cannot find any instructions on how to use these scripts. Anyone that have tried this? Best regards, Terje N.
Next Page
