Windows Service Monitors Availability
I have encountered a problem with our reporting on Windows Service Monitors. I have loaded the hotfix 8721 hoping that it will fix the problem but the problem is still there. I need this report for my monthly reports which is creating a lot of problems and taking a day to give the report through. It happens when you do a report for all devices on a last month period and exporting it to XLS or PDF (Please see attachment). The report shows fine when you run it but as soon as you export it the Columns
Help with MIB's
I am having trouble understanding MIBs. I have a Liebert UPS that we are trying to monitor. SNMP is working properly, but none of the monitor respond to test and none of the dials work properly. I have uploaded all of the MIBs that I got from Liebert in the order that they specified and I still get nothing. Any ideas?
Event Log Alerts - Email Only??
Hi I wonder if you can assist? Currently configured is a number of Event Log rules that will capture security events such as account lockouts, accounts deleted etc. Each time these are spotted on a server they appear as an alarm in the alarms page, as well as email an address due to a configured notification profile. What i would like to be able to do is to continue to spot these events, for this to then trigger an email alert but not show up under the alarms section. We have suffered with conficker
"Some Stray Entries found for this device"
Hello, Running Opmgr 8720, trying to add an ESX 3.0.1 host, getting this error. I have removed any virtual machines that were previously discovered. Please advise. Thanks.
Getting Really Annoyed With OpManager Distributed Edition
We use OpManager distributed edition as we have multiple remote sites but I am getting really sick of the problems we encounter... it is not very reliable and the lack of features and updates compared to the stand-alone edition is a real pain. Manageengine are supposed to be working on merging distributed edition into the same code as stand alone to allow both versions to release updates at the same time but the promises for this release keep slipping. Maybe it is time to look for an alternative
WMI Not working anymore
Hi all, We have been successfully using WMI queries for quite a while now, however the account that has been used to authenticate has been disabled as it was a security risk being a Domain Admin. We have setup a service account and configured the permissions for WMI and DCOM to allow access on each server for that specific service account. When I input the credentials into OpManager and configure the server to use the global settings, the test works and both snmp and wmi passed. However when i test
Is there a way to suspend alarms for a device undergoing maintenance?
We are testing...and would like to know if there is a button to select when we are restarting servers etc for maintenance?
OpManager integration with OpUtils
We use both products and OpMan is good at alerting when a switch interface has a problem and OpUtils is good at knowing what IP/DNS is currently plugged into that interface. Can you link the two products so that the OpMan email alerts can also provide the current DNS name on the interface from the OpUtils database? -Thanks
Unable to remove old fibre switch port monitor from database ?
we are using IBM BladeCenter with Brocade Fibre switches with Virtual connection capability. I set up SNMP monitor for swFCPortOpStatus ( .1.3.6.1.4.1.1588.2.1.1.1.6.2.1.4.* ) in Opmanager to monitor active ports incase of failure. Later I found that I can have a better monitor by using another OID. so I remove the old ones and put in the new OID (swFSPortPhyState, .1.3.6.1.4.1.1588.2.1.1.1.6.2.1.3.*). Out of the six switch monitors, only one works and the other 5 still remembers the old OID and
Windows Performance Monitor Thresholds Deleted after Upgrade to 8721
After we upgraded to 8721, the threshold for all the performance monitors blanked out.
how to get disk utilization chart on linux servers?
I can't seem to get the pie chart to work with the linux servers. I have been testing the monitor and it fails but if I do an snmpwalk manually for that oid it works just fine. Any idea why its failing?
APC PDU Outlet Status
the following entry in the POWERNET MIB: .1.3.6.1.4.1.318.1.1.12.3.5.1.1.4 shows the status of all 24 outlets on the PDU i can use the instance (e.g .1.3.6.1.4.1.318.1.1.12.3.5.1.1.4.1) to get the status for outlet one which is either OutletStatusOn(1) or OutletStatusOff(2) my question is this: i want to monitor all 24 outlets on this PDU for a change. For Example if outlet 2 is currently off then gets turned on i would like an alert to that effect as well as the reverse if it is on then goes off
Maps>Network Views>Networks Map Always Gives "Sorry! An error occured"
Pls see attached image...
OpManager Billing versus Netflow Analyzer?
I notice that OpManager has Bandwidth Billing functions, are these the same as what's in the Netflow Analyzer product or more enhanced or less? we are looking for a single solution to manage IPAM, Network and Bandwidth Billing for our clients ideally a single solution would be good but i couldnt see any IPAM function in OpManager so im assuming we need to use OpUtils and Netflow Analyzer themselves, which we have already been informed cant tie into each other?
Which is best Practice? Installing the OpManager on a Physical Machine or on a VM
Hi, Which is the best practice? we have installed OpManager on a Windows 2008 machine which is physical server, if at all we want to move it to the virtual machine were in we have ESX 4.1 will there be any changes. Will this work fine as a physical server. Please advice. Thanks, Chetan Krishna
How to set a snmp monitor to get a value calculated from two oids?
for exmaple: 1.3.6.1.4.1.123456.1 means total number of the value. 1.3.6.1.4.1.123456.2 is the current value. I wannor create a monitor to get the value like this: (1.3.6.1.4.1.123456.2 * 100 / 1.3.6.1.4.1.123456.1) Or I can create two monitors to get values of those two oids separately. and then, how to set the config file to show the value (1.3.6.1.4.1.123456.2 * 100 / 1.3.6.1.4.1.123456.1) in the snapshot dial.
Added Support for:
Equallogic SAN Devices APC PDU Outlet Status Monitoring I would also like to see where we can design snapshot pages or at least choose what metrics show up on them. thanks!
Status Message Unable to fetch Managed Object details for the object : xxx
Hello, we use OpManager Version 8720. Today we added a VMWare ESxi 4 Server to OpManager. After changing the IP-Adresses of the Virtual-Machines running on that VMWare server, we are not able to see the details of any of those virtual-machines. We always got the Message: Unable to fetch Managed Object details for the objec: xxx Even deleting and readding the VMWare-Server and its Virtual-Machines did not help. Our Database is on Microsoft SQL Server and we run DBRepair without any success. Can you
Monitor DHCP on Cisco Router
Hi, Did anyone found any solution to monitor the DHCP pools running in CISCO Routers? I am mostly interested in the percent or free IP of the total number of available IP. Thanks and Regards, Razvan Despa
Question regarding URL Monitoring (Javascript)
Hi, I have a question regarding URL Monitoring. I want to monitor a Webinterface for a Citrix Client. I want to know if its available or not. The problem when i use the URL Monitoring is, it wont receive the real page because it cant translate javascript. The page read by OPManager is a standard "Javascript is not installed" Error Page. Is there a possibility to enable Javascript for OPManager or an other known workaround? Kind Regards Karsten Werner
Unable to unmanage Fibre switch ports
I set up snmp monitor for Brocade Fibre switch and removed all ports not being used but Opmanager keeps showing alerts from those ports. I had remove them from Monitor and Interfaces through unmanaging the ports already. Does any one come acroos this one and have a solution ?
APC PDU Support
I would like to monitor our PDU's and set alarms for if outlets are on or off and things of that nature. How could i go about doing this?
OpManager with more than 4000 Devices
I need to create an OpManager configuration with over 4000 Devices, so i will like to know which considerations or recommendations you can give me from the technical point of view for that amount of data. Thanks and regards.
Monitoring CPU, RAM And HD AS400 Servers.
Hello: Please can help us with the following case: We are currently working with OPManager Essential 8720 about Windows Server 2003 Standard. We are monitoring some servers AS400 V5R4M0, we have the following drawbacks: OpManager can´t detect the consumption of the CPU, RAM and Disk Utilization of the AS400 server. However, try with "MIB Browser" the RAM memory consumption by through the MIB "HOST-RESOURCES-MIB" appears the following: Test CPU. Test RAM. If the result is 5 values, OpManager also
Generate Custom CLI For Data Base HP-UX
Hi: Please can you help me with the following case: We are monitoring some HP-UX servers. These servers are installed one data base. I generate a script on the server so that by typing the command: $ sh /home/mprebel/shells/listener_monitor.sh;tail -1 lista_ora.txt| cut -c 1-2 Throw the state (If it is up or down) or the availability of the data base. For example: If the database is up, the result is "OK". If the data base is down, the result is "TN". The help that I ask is, can you please help
OpManager DE error deleting device
Hi, using OpManager DE and manually added a device, that was not discovered properly; eventually I deleted it, and now i cannot add it, Entries for the device are either partially added or removed.Click [here...] to remove and readd the device No matter what I do - RepairDB.bat, wizard ( it does not show anymore but i cannot add it ) stopped and restarted probe service both probe and CS ... manually remove from db ?
vmware ESX monitoring
Hi all, We have sent a request (and followed up) to support and sales but have not had a response so i thought I would post here as well. We have just implemented VMWare ESX in our environment and would like to be able to monitor them with our current OpManger server. I'm planning on upgrading to the SP2 release tomorrow night and would like to find out how we can support the VMware ESX monitoring add-on? We have not yet purchased the add-on but wanted to first find out licensing restrictions and
CISCO IPS Monitoring In OPManager
How to monitor Cisco IPS using opManger
Compare to IPSwitch WhatsUp
I currently run IPSwitch What's Up and it has worked ok but am looking to see if they are now lagging behind in feature set. Anyone have any experience with both and have some comments? Thanks.
Custom SNMP monitor
I need to have a monitor for "total connections" to CISO ASA 5500 series Firewall device. I went to Monitors->Performance Monitors and selected Add Monitor. Could not found a template for this option. Then after I went to New Monitor from Admin ->Device Templates->New Monitor. I could not found a value OID for this. Could any one tell me which OID and MIB I should use.
OpManager PPT slides
Hi anyone has powerpoint slides for OpManager product presentation to share ? Thanks Po
email alerts
I am running the latest version of opmanager and its all running well, i have set up email alerts on various issues when they arise, only problem is i get emails all night telling me that every site is down, although when i check there are no alarms and nothing in the logs, so why am i getting these emails, usually constant from about 1:30 am untill 7am then it all clears....., and nothing in logs and no alarms during this period... any ideas? Mike
Custom OIDs / DD-WRT Router
I am trying to monitor a router with DD-WRT firmware. The OIDs that I need to use cant be found in any of the MIBs found in OpManager's MIB browser. The maker of this firmware does not provide a MIB database that I can use within OpManager. So my question is, how do I add these OIDs to OpManager so i can use them? See example below (some of the dd-wrt oids are similar to linux oids, for example for memory info - but they have a .101 at the end whereas linux oids don't therefore I can't use the
OpManager 8721 unable to remove and rediscover device
Hello, I know this sort of problem has been addressed many times in the forums, but I cannot locate a recent post that relates to OpManager 8.7. I am having ongoing problems with the rediscovery of a certain host. Originally the device was added as a custom device. We then rediscovered it as an ESX server with virtual devices using the new functionality in OpManager 8.7. Subsequently the device was deleted and then rediscovered as a standard Linux server. Herein lies the problem. I now get one
Canopy Motorola.
Gentlemen, good afternoon, 1 - I can not to add them to the Motorola Canopy Device could help me. 2 - after he took out a device, I try to add the same IP and gives error. Where could remove him physically? Thank you
Opmanager 8 starting issue on Fedora Core 11
Dear All, today i've tried to setup opmanager 8 on a fedora core 11 linux flavor. everything went well till the moment of starting opmanger. done: cd /opt/AdventNet/ME/OpManager/bin ./StartOpManagerServer.sh and the output is the following: # ./StartOpManagerServer.sh Java Home /opt/AdventNet/ME/OpManager/jre Cannot resolve hostname. Using localhost by default This evaluation copy is valid for 29 days inside addon check Created table Schedule Created table ObjectTypes ...............................................
How do RSS Feeds for Alarms work?
I've setup my Outlook client to receive the feed from OpManager to keep me up-to-date on the alarms, but I only have a single initial Clear alarm showing up from when I first set it up - however there are more alarms displaying in OpManager. We're using the Free Edition (at least until I can get approval), build number 8720.
Serveurs en double dans la liste
Bonjour à tous, j'ai des serveurs qui sont en double, voir en triple dans ma liste...comment remédier a ce problème? Car lorsque j'en supprime un, ça me supprime tout. Merci (screenshot en pièce jointe)
Connecting remotely
I have downloaded the program to evaluate. I installed it on a machine, and i connect to it thru the localhost web browser. How can i connect to it from a remote machine? I have tried using the IP address:7080, i have tried using the FQDN:7080. neither will connect. Any help is appreciated.
MIB Browser
Hello everyone. I think I may have been posting in the wrong forum. I am having some trouble with the MIB Browser in OpManager 6.0 I am trying to manage a couple APC UPS units. I can find them no problem, do GET's no problem. But when I try to perform any SET's, I get the following error: Error Indication in Response: com.adventnet.snmp.beans.DataException: Error : MIB node unavailable for OID. This is with any OID I am trying to SET within the APC MIB from the OpManager MIB Browser. I have seen
Next Page