OpManager vs. Orion competitive review.
Dear all, In those days I'm reviewing both products mentioned in the subject to be implemented in my company,and looking for a comparison information for myself and my management. Thanks in advance for any relevant information on the subject, Brgds, Alex U. P.S.I came across a similar topic in the forum,but it was locked...
SMS Alert on Opmanager Free version
I have a question : Do Free version have SMS alert feature ? Thanks and Best Regards
Free Sharepoint monitor integration with OpManager v9
Hi Can you please advise how I can integrate the free Sharepoint Health Monitor in with OpManager? Or how do I get the same information in OpManager? I'm sure it's there, but I can't find it and a search of the userguide provided no help either. Cheers James Gander Gander Service Management IT Operations and Service Management Consultancy
Disk Utilization - Windows 2008
Hi. When OpManager raice an alarm for a Virtual Windows 2008 server I often increase the disk size for the server. But OpManager does not see that the disk has been increased. Even if I rediscover the server, remove the disk utilization monitor and add it again, it still have an alarm on the utilization. Only removing the server in OpManager and add it again helps. Running both SNMP and WMI. Any other solution to that? Thanks Torsten
SNMP : The Monitor did not respond to the test request
Hello, I want to monitor a Eaton ups (Evolution S 3000) on OPManager but I receive an error: When I try to run a test from a performance monitor, I receive a popup with a error message (The Monitor did not respond to the test request). When I try to run the same test (same OID and same device) with the "Mib Browser", I receive a correct value. Can you help me to fix this issue? Regards, PYM
How to monitor when a service is turned ON
We typically do not utilize the FTP process. I need to see if I can find a way to monitor the process for when it gets turned ON as it should be in an OFF status. Any help is much appreciated.
Cannot add device. This free edition of OpManager does not..
I get "Cannot add device. This free edition of OpManager does not support adding more than 10 devices". I have only 7 devices in my list... I have deleted a device too, because there is a device I want too try out, but I still get the same error-code. Are there still deleted devices in some kind of config-file so the program think it is 10? I would need some help here, please .....
Show linkstatus in business view
Hi When I do one business view with my routers and switches, I put in links beetwin devices. The link status show trafic load arrows, and I only wish to see links status (gren or red), where do I change this?
Citrix servers report 100% when it is not
Hi there, I am new to Opmanager. Does anyone know why Opmanager would be reporting 100% CPU on one or two of my 30 Citrix servers. Server is happy at under 10% Where can I start with this one? Thanks
Opmanager + Netflow
Good afternoon. I use MS SQL as a database for Opmanager 9011. I ask to answer such questions: 1. How it is possible to connect NetFlow that it too used database MS SQL? (By default it uses mysql) 2. NetFlow uses the same database as Opmanager? 3. How to archive and restore Opmanager + NetFlow?
OpManager Hyper-V monitoring not working in Build 9100
Just upgraded to build 9100 and am trying out the Hyper-V monitoring feature. Hyper-V host is running Windows Server 2008 R2 w/Hyper-V. It has 5 Guest VMs and WMI is enabled an working. When I discover the host, it adds all the VMs properly and all seems well. However, many metrics inside the VM do not work, such as: - Memory usage - CPU usage - vNIC usage ..which makes the monitoring somewhat pointless. Also, the CPU core IDs for the host monitoring are out of order -- that is, there is Core
Alarm Fake
Good morning, My OpManager 9011, is showing a yellow alarm, but when I access the group to get what equipment is the alarm, everyone is green (normal). Taking this false alarm or update all the monitoring tests? thank you
Suppressing alarms, including SNMP Traps not working
Hi, I am testing the suppress alarm function in OpManager, so we dont get spammed when a server gets maintenance. The server is monitored by SNMP, CLI and is sending traps for various events. When i select Suppress all alarms, i still get notification mails on SNMP traps send by the server. I also tried to create a maintenance program, including the server and/or businessview, but that does not fix te problem. How can i suppress ALL notifications of a selected server for a periode of time? Kinds
[INSTAL] OPMANAGER 7 into ubuntu 7.10 [Problems]
I have downloaded ManageEngine_OpManager_7_linux.bin I did: sudo chmod 777 ManageEngine_OpManager_7_linux.bin and then: sudo ./ManageEngine_OpManager_7_linux.bin I followed the wizard until the end. All thinks ok. When I try to start opmanger: :/opt/AdventNet/ME/OpManager/bin$ sudo ./StartOpManagerServer.sh I receive the follow errors: Java Home /opt/AdventNet/ME/OpManager/jre cp: cannot stat `/opt/AdventNet/ME/OpManager/apache/ssl/backup/ssl.conf': No such file or directory The File: /opt/AdventNet/ME/OpManager/apache/ssl/ssl.conf
Exchange & DAG monitoring
Hello, I have OPmanager set up but I'm looking to get some monitoring for our Exchange (2010 SP1) DAG's, I want to be alerted when the databases switch sites - i.e when one moves to active on another site. Is that possible? I was going to check and see if there is an Event ID relating to it, but I thought OPManager might handle this within a plugin feature or such?
Configuration Management Intermittent Backup Failures - "Device Response Not Available"
Version - 9011 I've setup 3 Cisco devices that I am trying to perform configuration backups through a scheduled process. These backups work when I test the credentials and they even work sometimes through the scheduled process. However, I have received "Backup Failed" errors on 2 of the devices that I know are up and running (no DNS issues, no network issues), but the plugin seems to fail. Is this plugin-in just buggy, are there known issues/workarounds? It definitely seems like to me that the intermittent
non windows server monitoring
dear team, I want to know that can we monitor non windows servers in opmanager? if yes then via snmp or cli? Which one is more reliable?
LSASS over 600%
One of our Domain Controllers reports LSASS CPU usage of 612% and more. How could I fix that? Build 9011 DC on Windows 2003 R2 Virtual Machine on ESX host.
Table descriptions for OPManager data
Hi, I saw that for App Manager there's a good ER Diagram describing all relationship between tables for various objects it monitor. https://forums.manageengine.com/topic/raw-data-export There's anything similar for OpManager? We would like to try to integrate in some way vcenter operations from vmware so that we can get some alerting information and data into it and one of the way to do this without a already done connector is to directly query tables and get the data. Francesco
Temperature format.
Is it possible to have a temperture alert be set to monitor/report in fahrenheit vs celsius? If so, how. If not, do you have a suggested script to alter that setting/output?
OPManager 9 performance monitor stops unexpectedly
Hello there, I have performance monitor defined for windows server 2003, for instance Disk Utilization. Interval in minutes = 5. monitoring interval for that device is 5 minutes also. that is Disk Utilization measurment history for today: Feb-27-12 10:35 69.0 Feb-27-12 9:55 69.0 Feb-27-12 8:55 69.0 Feb-27-12 8:00 69.0 Feb-27-12 7:55 69.0 Feb-27-12 7:35 69.0 Feb-27-12 5:35 69.0 Feb-27-12 4:30 69.0 Why could it be that I have these diffrent
Discover and monitor ESX host *without* classifying already discovered VMs as "Virtual Devices"
I have an environment where all of the servers, whether they're physical or virtual, have already been discovered, thresholds adjusted, and notification profiles applied. I notice when I discover an ESX host, even if I have auto VM discovery unchecked, all the already discovered "Server" devices on that host get modified to become "Virtual Devices" and the notification profiles and monitoring I had configured on them is removed or changed. Is there any way to monitor an ESX host without this reclassification?
Backup OpManager without NetFlow
Is there a way to execute BackupDB_Mysql.bat and have it skip the NetFlow plugin data? We want to backup only the OpManager database and not the NetFlow database due to it's size. Thanks, Aaron
OpManager Availability problem
Hi all, I have a problem with availability round graph in OpManager. Some devices after the short downtime shown as 100% unavailible, but at the same time device is availible and snmp test shows PASS. This bug may be corrected by rediscovery option.... and as a result in availiability reports this devices shown as down. Is someone have this trouble? What can I do whith this?
a better way to monitor services?
Is there a more efficient way to choose which services to monitor? Currently, these are the steps I take to monitor a service: (1) Add the device I want to manage (2) Click on the monitors tab --> Windows Service Monitors --> Add Monitor --> Click [here...] to discover services from device --> choose the service I want (3) Go to the notification profile tab --> Click on the appropriate profile --> click when any [selected...] Windows Service is down --> choose the service from the Criteria window
Upgrading OpManager Free Edition
I'm currently running Opmanager Free edition at home and have been searching for over an hour to see if there is a way to upgrade to the current, without losing my statistical data? I'm running under Linux 64BIT. I've tried the scripts that are located in the bin/backup, but when trying a restore, it complains about version being different. And Google isn't being so kind. Currently running 9000, Thanks! Doug
Email Alerts too slow
I have a test email alert profile that is set to email if any of the following parameters are met: 1) Device misses 1 poll 2) Echo Service is down 3) If "Cisco Shutdown" TRAP is received It usually takes anywhere from 6-8 minutes of a device being down for an email to be sent. Does anyone know how to set it up to email immediately when a device is offline? Thanks. Respectfully, Will
opmanager fail to send notification after device misses 1
OpManager failed to send email notification when a device missed 1 poll.
Service alarm not showing
Hi I'm running OpManager 9 with the latest updatet, but have some problems. My problem is that I have som services on my Windows serveres that Opmanager is set to monitor. The problem is that if the service stops, Opmanager does not give any alarms on it. Yes I can see that the service is down if I drill down on a single server, but OpManager it self does not trigger an alarm. Anybody with any surgestiens on how to fix this?
How to add Host header in URL Monitor (Opmanager 9)
Hi All, How can I add host header in URL Monitor? I have a server with different sites on it. I'd like to monitor indiviual site with host header. What is the best way to do that? Best, Chee Gone
Url monitor several servers
Is it possible to monitor several servers with the same URL monitor. We have several servers that runs the same websites. Therefor we need a way to monitor them with say www.abc.com which does not resolve to the actual webserver we will monitor. Instead it shall use the ip of the server and send the url specified as host header. Best regards Claus P
Problems with URL Monitor and shared IPs on IIS
Hello, if i configure a URL monitor for sites that run on IIS and share the same ip with other URLs than i get a "Host Unavailable" error. Examples (all on one IIS): Site1: www.example1.de on IP 123.456.789.010, no host header - check as ok Site2: www.example2.de on IP 123.456.789.011, host header "www.example2.de" - Host Unavailable Site2: www.example3.de on IP 123.456.789.011, host header "www.example3.de" - Host Unavailable I check Site2 and Site3 in browser - all run fine. (sorry for my english)
Is there a link from OPM to NFA(not plugin)
Hi Support team, I want to know if there is a link from OPM to NFA(not plugin). As we know, if we installed the NFA plugin, we can click the link from OPM to NFA plugin to analysis the interfaces' flow, or we can click the "exchange" from NFA plugin or NFA(not plugin) to OPM. But the NFA plugin can't work well, and I want to use the NFA(not plugin) to analysis the flow, but I found that there was a intergrated problem between OPM and NFA(not plugin), can't directly click the interface of
Single Report for CPU Memory disk and Partition
Hi! Can we get Single report for CPU / Memory / Disk and partition? We are getting individual Report but generaly everyone requires single report. Waiting for Either query or Report. Regards, Dipak Raste
OPManager write to securitylogg in Windows server
Hi OPManager writes to security logg (Eventlogg, login/logout events) every check opmanager do to one Windows server. The problem is that the logfile get ful, and we can´t se other things in the logg, youst opmanagers logins. What can I do, so that Windows server do not write opmanager login/logout to the logg?
Oputils Service is Failing to Start
My oputils server is down, the service will not start: "The ManageEngine OpUtils service terminated unexpectedly. It has done this x time(s)." This started last Friday and support has not called back.....can anyone help? Thank you.
Bandwidth Monitor - E2005
Hi, When trying to add a device to bandwidth monitor I get the following error message, - E2005: Not able to retrieve complete data from the MIB. Any ideas why I receive this message. I am able to do an snmpwalk on all OIDs from the CLI on this box and from other machines, just unable to add the device to bandwidth monitor within OpUtils. Thanks
problem to add a device in OpManager
I am trying to add a device in OpManager, but after the tool indicates that the device was added, type in the ip and it says that the device was not added and prompts you to add, how to fix it? or how can I do to add the device when it happens this problem? OpManager is my version of 8812.
Configure alerts when user access resource
Configure alerts when user access resource
I Cannot Edit my Map or Add new Map
Hi every one I have new Issue First i create a map in opmanager and work fine but when i want to list the devices in the map to see the ip address its show me blank Also when i want to edit or add new map give me blank page please check the images The Map After click on list view to see all ip address When i want to edit or add new map
Next Page