Avaya ERS Memory Utilization from OID calculation
I am attempting to create a custom monitor that will provide Memory Utilization for Avaya ERS 45xx/5xxx switches. Avaya allows access to an OID for Total Memory (.1.3.6.1.4.1.45.1.6.3.8.1.1.12) and one for Available Memory (.1.3.6.1.4.1.45.1.6.3.8.1.1.13). I have created monitors for these individual OIDs to be sure the data is available and correct results are returned. I would like to create the monitor and associate it with the Memory Utilization snapshot dial. I looked at the following KB
OpManager Notification Settings
Has anyone had an issues where the notification settings changing on their own? One day the team goes through and sets up the alerts in the notifications and the next day they have changed and some items are unchecked. My team swears that no one touch them but I find it hard to believe they can change on there own? Any ideas? Thank you,
OPmanager and Exchange 2010 support
When will you implement it? I need Exchange 2010 support in my monitoring software. I like Opmanager and want to buy it for our company, but we use Exchange 2010. I´m thinking of searching at other monitoring softwares if Exchange support in OPmanager implementation is too far away in the future.
How to optimize BBDD and server performance?
Hi all, We are running Opmanager and Netflow Analyser in a 4 quadcore and 4GB RAM server. We are experiencing bad performance (about 1000ms to charge the web pages) so we want to improve this performace. Any idea? Another question is that currently we have the BBDD installed at c:\ where there is few free space, so how can we change the BBDD to another disk with enough space? regards, Christian
Interface Alert
OpManager is showing various alerts some interfaces on the switch, why these alerts are appearing? Accessing the snapshot of the interface: Administrative Status - UP Operational Status - Down There are several interfaces that with this status are not generating alerts and wrong. Tiago Toledo - Bigode Blog: http://www.pastelariadigital.com.br
Openstack
Hi, I see that you have started building monitoring functions into Opmanager to cover EC2 and Azure cloud infrastructure. Are you going to be doing the same for the Openstack platform? This is already widely in use and would be most beneficial to include in Opmanager for our own (and I am sure many others) Infrastructure and add to the value we already get from your solution. Thanks Eugene
Virtual devices vs servers
Hey I have imported 3 of my 12 ESXi servers, and have gotten the virtual servers imported. Then i have moved my Exchange 2010 servers to "exchange", which caused the Exchange server object to be moved to "servers" instead. Is there a trade off, if I move all the servers (virtual devices) into servers instead ? Just so I have them all collected in one panel view....
Cisco Small Business SG500X-24p Switch
All, I have tried to get the Cisco SG500X-24P switch recognized by OpManager, but I am having no success. I have downloaded the mibs from the Cisco website, copied them to the opManager mibs directory. I have tried using the mib browser in the admin section of OpManager with no success. Does anyone have a template that I can import as I have had no success creating my own. Thanks
how can Opmanager alerts be sent to a GSM modem without serial port?
Hi there, It's a kind of Apollo13 rocket science we've seen in Hollywood. I want to connect a server with Opmanager Build 8812 to an existing SMS alarm system, named T, with GSM modem functionality but without COM port. T accepts only digital voltage input. Is there any work-around solution? B.
how change port for NCM NetFlow in opmanager
dear sir how can i change the plugins port in opmanager i use this C:\opmanager\bin>ChangeWebServerPort.bat but i encounter new error Error 102 (net::ERR_CONNECTION_REFUSED): The server refused the connection. the web page open but when try log in give me the error
Opmanager as a VMware appliance
Hi, Have you guys thought of building / selling Opmanager as a VMware virtual appliance? Everytime I deploy a new Opmanager I have to go through the exact same repetitive tasks of building a server, updating it and then do the Opmanager, Netflow, IPAM etc. installs. Having an appliance that already has the default setup would make this faster and by far more supportable for your support teams. If they don't have to contend with "Where is the customers install directory" and " which OS are you using"
Network map LLDP support
Hello Any updates on when LLDP will be supported for the network map. We do not run Cisco devices so CDP doesn't work for us.
Allarm Managment
Hi, is possible to delete an allarm? I try to explain better... I have bought OpManager plus Netflow plugin. I have also monitored the ISP Router. I received a lot of error message about the Authentication SNMP from the ISP router. I have made a little research in the web and the cause may be the presence of 2 Network Management tool ( Mine with OpManager + ISP with nagios ) I'd like to delete this allarm. Is it possible? I'd like to know also how I can do the backup of the Database. I use the DB
Permanently disable ads on the login page.
Hello Is there any way on the server side to stop the scrolling adverts on the log in page. When accessing Opmanager over a low bandwidth connection using RDP or Citrix it really slows down the log in process, and since the ads don't contribute anything to the functionality of the application I would like to disable them globally.
Disk IO Graph and Stats
Hi, OPM showing Disk IO on Device snap shots till GBPS / TBPS but when i check disk IO graph it shows me in KBPS. Also, Disk read / write also showing in KBPS. Find the attached snap shots for clear understanding. Kindly advice regarding Device Snap Shot disk IO
Administrative Status
About this functionalities of OpManager, it disables the setting in OPM and not on the switch? Or using this option will disable the port on the switch? How to disable switch ports? If you want to administratively disable an interface, it is possible with OpManager in just a few clicks. Here are the steps: Go to the required snapshot page of the interface you want to disable que. Under Interface tab, click the Disable button. The interface gets disabled and the interface's status is changed to Down.
Backup script - Press any key to continue
Hi, We try to backup OpManager by using a daily scheduled script. We are using the following command line: BackupDB_Postgres.bat" -mode all -destination c:\tempbck It's working fine, but... at the end of the backup "press any key to continue..." appears. Then next schedule failed because the current one do not finish while we presse a key. Is there any option to add to the command line ? Thanks a lot. Vincent
Backup Not Happening in proper format
Team, we have Opman installed in server 2008 with build number 9410 , we are taking backup , its happening but not in ZIP format , due to this we are not able to restore on the new server (2013). Please advice.
Backup NetFlow Plug-in 9100 version and restore on another machine
Hi, I need help on backup on Netflow plug-in 9100 and restore on to another machine before actual deployment on operation machine. How do I go about it? As from now, I have already backup OPsManager to the other machine with configuration but I am unable to see the netflow plug-in statistics on the network tab > NetFlow. Anyone can guide along?
Opmanager Visio Addin
When will this be updated for office 2010?
Standard notifcaton for cisco devices
Hi, I want to configure Workflow in OpManager, I want to know is there any standard notification for devices like switch, router and firewall? Best Regard
Problem with Telnet on Opmanager
Hello Could you please help me concerning a problem of cisco telnet by OPManager platform so i added the configuration on IE and windows to activate telnet but the issue persists which i cant monitoring the router by telnet the opmanager version is 9 and the IE browsrer is 9 Note that the telnet is configured on Cisco Router on Windows 7 (64bits)and IE Regards Ahmed Zniti
SNMP traps not regognized
Hello Im using free 10 device edition of Opmanager 10 I made fresh install. Earlier I was using version 9 and SNMP traps worked fine. I put mib files to mibs folder. Also in Trap processors add new trap processor from that mib. I have 2 mib files for different systems , But all traps are going to Unsolicited Traps I see there : (swptrap-mib) No Trap Parser defined for received trap: Enterprise: .1.3.6.1.4.1.18494.5 Generic Type: 6 Specific Type: 1 Variable Bindings: .1.3.6.1.4.1.18494.5.1.1: SWP01
OpManager Probe issues
Hello. We experience an issue with OpManager Probe 9400. We had a working Probe, till we got the following problem: - The service is running - there are no errors in the Event viewer - java process is running - but a browser shows nothing. We decided to reinstall the Probe, as it took too much time to get it working (without any results). We used a clean Windows installation with all the latest updates. But after installing OpManager Probe we get the same issue: - everything is running - OpManager
Automatically Log Alerts to Syslog Server
OpUtils allows you to automatically log alerts directly to your Syslog Server. In addition to the email notification, you can also make OpUtils log the alerts to your Syslog Server. This will help you to track and monitor all your network related alerts from a central point. Alerts from Switch Port Mapper, IP Address Manager (IPAM) and Rogue Detection tools has this option currently enabled. The latest version available in the website supports this feature (# build 60041 and above). If you are an
"Run System Command" / "Run Program" = "Please Wait"
Hi, No matter what I do, I can't get passed "Please Wait" when pressing the test button. I'm using PsTools' PsService.exe to restart a service. I've tried both "Run System Command" & "Run Program" notification profiles. The command works find in the command line and when executed from a bat file. Run System Command Attempt 1: "C:\PsTools\PsService.exe \\mymovies-3 restart FMS" Works in a command line but just get "Please Wait" on the test button. No service restart. Attempt 2: (exe inside OpManager
AVAYA MIB Monitor Devices
Hello Folks! We have some AVAYA Devices, and really want to have the option to monitor those with OpManage, but, we do not have the MIB. I've already downloaded the MIB Files from AVAYA, but do not know how to use it Right to monitor my devices, please Help !!! Currently using OpMange 8, pretty soon to update to 10.100 as soon as my licence arrive. AVAYA MIB Files http://support.avaya.com/downloads/download-details.action?contentId=C20090710164439169000992&productId=P0477 Thanks in advanced
WMI for localhost service monitoring
i have opmanager probe server and would like to monitor the windows services. i already left the user name and password is empty in the credential. Then click "test credential", it return "WMI Not Tested" And i try to add "Windows services monitor", it request me input the credential again and did not success to add the "Windows services monitor" i am using opmanager build 10000
Cannot see device list in widget dropdown
Hi, I am trying to create a new dashboard. I added a widget , last N hours of traffic but i dont see all the devices I would like to add. Am i forgetting some other configuration. Awaiting a quick response. thanks, Renee
All SNMP monitors stopped responding
Hi, I've just noticed that all my servers stopped showing SNMP values. I've already checked: the credentials are correct SNMP is running restart of SNMP service on device doesn't help restart of opManager server doesn't help reading an SNMP value from opManager mibbrowser times out This has happened twice in as many days but the first time we were still able to read an SNMP value from the MIB Browser and then it randomly started working again. No one was in the system when the SNMP monitoring stopped.
Date Format in Opmanager
Hi, Is there any configuration to use Date time in 24H format ? Thanks
SSL Opmanager 10 w patch
I would like to use an outside acquired cert, rather than the built-in self-signing mechanism. Can you give instructions for doing this?
RPC / WMI firewall ports
I am trying to collect Event Viewer logs from servers residing in a different network segment from the OpManager Server. These network segments are separated by Firewalls. I know we need ports 135 (RPC) and 445 (WMI) to be open to accomplish this (which they are and I verified with telnet), however I still get RPC not available. I verified the RPC and WMI services are running on the local boxes as well. Are there any other port considerations (say when using RPC) for the firewalls that could be blocking
custom monitor snmp
Hello, I'm setting up a custom monitor based on an snmp table. The table is composed by 6 fields, the first coloumn is the name of the raw (that identifies a mirth channel), and the other fields are the values that I want to monitor. Everything works fine, I set up 5 different monitor, each one is related to a value. The issue is that I want the alarm to contain also the value in the first coloumn of the raw that generated the alarm, how can I use the snmp oid (that identifies the coloumn) as a variable
OpManager Probe Silent Install Windows
Hi, I'd like to know if it's possible to install Opmanager Probe in silent with a response file for Windows? Best Regards,
Business View
Dear, i want to create a new business view i know i can do it. my problem is how i can change the icon background to be transport all (not changes based on the device status) and how i can group devices in rectangle or circle shape Regards
Viewing CCTV or dashboard outside of Opmanager
Is there a way to view a either a Dashboard or a CCTV window outside of opmanager? We are looking at a way to display our current network status - to staff so they are aware if their might be a problem. We have a web based portal for sharing information and would like to add the network status as a frame or something similar. Is this possible or has anybody tried it?
Maanage alerts when a WAN Link is down
Hi We use OPManager 10 and we have several remote network sites. When a WAN Link si down, we get alarms related to the remote router and alarms related to any device behind the router that all that stuff are down. is it possible to configure OPManager 10 that when a WAN Link is down so stop alerting about devices that are behind the remote router ? Thanks Kader
Work Flow Process
We have multiple citrix servers that our users come in on through a terminal service. We often get messages that say a process has hit our threshold and lists the top three processes. We want to see who the owner of the process is and email us. What tech support told me to do was go into workflow and set it up there. I have looked around, but don't see where I can do that.
Problem in the conncetion btw OPManager and MSSQL
Hi, I think that the OpManager that I have installed on a windows server has lost it's connection with the MSSQL Server which is installed on another server. cause while I go to the DBConfiguration file in bin directory of OpManager and want to OK the settings it gives me a message as "NO Driver Jar is found". What does this message mean and what should I do? If i change the database from MSSQL to MYSQL all my data will be lost. am I right? Best Regards
Next Page