SNMP traps not regognized
Hello
Im using free 10 device edition of Opmanager 10
I made fresh install. Earlier I was using version 9 and SNMP traps worked fine.
I put mib files to mibs folder. Also in Trap processors add new trap processor from that mib.
I have 2 mib files for different systems ,
But all traps are going to Unsolicited Traps
I see there : (swptrap-mib)
No Trap Parser defined for received trap: Enterprise: .1.3.6.1.4.1.18494.5 Generic Type: 6 Specific Type: 1 Variable Bindings: .1.3.6.1.4.1.18494.5.1.1: SWP01 , .1.3.6.1.4.1.18494.5.1.2: 20/05/2013 , .1.3.6.1.4.1.18494.5.1.3: 13:34:06 , .1.3.6.1.4.1.18494.5.1.4: Alliance Web Platform 7.0.40 , .1.3.6.1.4.1.18494.5.1.5: 10004 , .1.3.6.1.4.1.18494.5.1.6: WARNING , .1.3.6.1.4.1.18494.5.1.7: Security , .1.3.6.1.4.1.18494.5.1.8: login.failure , .1.3.6.1.4.1.18494.5.1.9: User swpadmin failed to login to application group Alliance Web Platform Administration 7.0.40 as Web Platform User. ,
Trap processor details:
Name: SWPTRAP-MIB_snmpSWPEvent
Description :
Version 1
Generic type: EnterpriseSpecific(6)
Specifictype:1
OID: .1.3.6.1.4.1.18494.5
snmpSWPEvent is received from $Source with the following related information : $*
and for other mib: (saatrap-mib)
No Trap Parser defined for received trap: Enterprise: saa Generic Type: 6 Specific Type: 1 Variable Bindings: saaInstance: Access , saaDate: 20/05/2013 , saaTime: 13:29:00 , saaPlugin: BSA , saaEventNumber: 3027 , saaEventSeverity: Info , saaEventClass: Operator , saaEventName: Operator enable , saaEventDescription: Operator rain : enabled. ,
Trap processor details:
Name: Saatrap_snmpSAAEvent
Description : The following event was generated via Alliance Access. More information is available in the details:
Version 1
Generic type: EnterpriseSpecific(6)
Specifictype:1
OID: .1.3.6.1.4.1.18494.2
Message: The trap is received from $SourceMO(displayName).The trap details are as follows , saaInstance=$0 saaDate=$1 saaTime=$2 saaPlugin=$3 saaEventNumber=$4 saaEventSeverity=$5 saaEventClass=$6 saaEventName=$7 saaEventDescription=$8
Also adding that mib files as attachment.
Im using free 10 device edition of Opmanager 10
I made fresh install. Earlier I was using version 9 and SNMP traps worked fine.
I put mib files to mibs folder. Also in Trap processors add new trap processor from that mib.
I have 2 mib files for different systems ,
But all traps are going to Unsolicited Traps
I see there : (swptrap-mib)
No Trap Parser defined for received trap: Enterprise: .1.3.6.1.4.1.18494.5 Generic Type: 6 Specific Type: 1 Variable Bindings: .1.3.6.1.4.1.18494.5.1.1: SWP01 , .1.3.6.1.4.1.18494.5.1.2: 20/05/2013 , .1.3.6.1.4.1.18494.5.1.3: 13:34:06 , .1.3.6.1.4.1.18494.5.1.4: Alliance Web Platform 7.0.40 , .1.3.6.1.4.1.18494.5.1.5: 10004 , .1.3.6.1.4.1.18494.5.1.6: WARNING , .1.3.6.1.4.1.18494.5.1.7: Security , .1.3.6.1.4.1.18494.5.1.8: login.failure , .1.3.6.1.4.1.18494.5.1.9: User swpadmin failed to login to application group Alliance Web Platform Administration 7.0.40 as Web Platform User. ,
Trap processor details:
Name: SWPTRAP-MIB_snmpSWPEvent
Description :
Version 1
Generic type: EnterpriseSpecific(6)
Specifictype:1
OID: .1.3.6.1.4.1.18494.5
snmpSWPEvent is received from $Source with the following related information : $*
and for other mib: (saatrap-mib)
No Trap Parser defined for received trap: Enterprise: saa Generic Type: 6 Specific Type: 1 Variable Bindings: saaInstance: Access , saaDate: 20/05/2013 , saaTime: 13:29:00 , saaPlugin: BSA , saaEventNumber: 3027 , saaEventSeverity: Info , saaEventClass: Operator , saaEventName: Operator enable , saaEventDescription: Operator rain : enabled. ,
Trap processor details:
Name: Saatrap_snmpSAAEvent
Description : The following event was generated via Alliance Access. More information is available in the details:
Version 1
Generic type: EnterpriseSpecific(6)
Specifictype:1
OID: .1.3.6.1.4.1.18494.2
Message: The trap is received from $SourceMO(displayName).The trap details are as follows , saaInstance=$0 saaDate=$1 saaTime=$2 saaPlugin=$3 saaEventNumber=$4 saaEventSeverity=$5 saaEventClass=$6 saaEventName=$7 saaEventDescription=$8
Also adding that mib files as attachment.