Can not restore Opmanager 10100
Hello I seem to be having issues restoring OpManager 10100. My Database is MSSQL 2008 R2 SP2. I'm trying to migrate my data to a new server. I have never had problems with this in the past. On my current OpManager server I am using the data base maintenance tool. I select All Data and Backup Mode is MSSQL to MySQL. When I try to restore the data using the same tool I get the following error. "This backup will be restore only in MySQL db server." I also tested and cant restore my current
Device already present in the System
I have some problems with adding a vmhost after I deleted it. I get the message: "Device already present in the System", but when I search for it as a host or ip I get no results. The reason I deleted the vmhost was that it could not figure out how to display the current VMs after some of them have migrated to another host. I am running MS HyperV cluster with four nodes. I am running OpManager 10100
Monitor a website with 403 - Forbidden: Access is denied.
Hi, Can Opmanager monitor a website (specifically ping) that states "403 - Forbidden: Access is denied."? Basically I have a web site that some users are reporting to be slow during various times of the day and I wanted to monitor it with opmanager (ping and response times) but due to the configuration Opmanager wont be able to open the site only get the above message. Thanks
Overview Columns
I'd like to edit my overview to include 2 columns, but am unable to do so. I can select the number of columns, but I can't edit the column widths. If click Save, I get prompted that I need to change the column widths: Anyone seen this before. Only happens on the Overview screen.
Cisco Firewall and Router
Dear Sir, I’m currently using Opmanager 9.0 latest version and my Cisco firewall and router only Availability can monitor but I need to monitor like Memory utilization, Active session count, firewall cpu utilization etc. Therefore I can’t monitor mentioned services and also opened Snmp port in the firewall but still the persist. Please, Kindly let me is there any port to opened in the firewall ? Regards, Qureshi
CheckPoint Firewall - No Data Available in Snapshot
I would like to monitor Nokia CheckPoint Firewall, but Snapshot Graphs show "No Data Available" in CPU utilization, memory and connection What's the problem and how to fix it ! Thanks Regards Raymond
Unable to fetch Managed Object details for the object
Opmgr v.7024 Every device I add, produces the "Unable to fetch Managed Object details for the object " when I try to view it. I have tried removing/re-adding with the quick configuration wizard and also with the article in the knowledgbase using removedevice.bat I have also repaired the database with the repairdb batch file. Rebooted etc. Tried adding different devices, removing via quick config and via the bac file for each. Tried adding multiple devices, devices of different types all give the
ESX Reports.
I am looking for, Total monthly usage report. Traffic In and Out of ESXi host. :) Example: ESXi 1 - In - 100 GB Out - 250 GB Thanks, Stephen
Is there a way to globally apply a Notification Profile/Rule.
Community: I am new to OpMan so please forgive if this is a simple question. I am looking to apply a global notification policy for every server that we are monitoring for simple ping. I can do this manually per machine, but with 300 machines that is a bit of a task. Is there a way to globally apply a notification profile/rule to every device? Thank you for any input available. Waggs
SSH - Credential Details
Hello all, I have the OpManager version 9400 and I have a problem with SSH credential. After many tests and with the help in this OpManager Topic http://forums.manageengine.com/forumHome.do?forumGroupId=49000000002007&forumTopicId=49000002644733 if successfully tested SSH credentials for a Linux machine. (see the attached picture). In order to apply SSH credentials I set the following parameters: Connection Protocol: SSH Port Number --> 22 User Name --> root Password --> my password :-) Command
Mixed Permissions or access to execute IT Automation Tasks
I have a need to allow my Tier 1 Help Desk to kick of certain IT Automation Workflows when they encounter certain issues. I do not want to give them Full access to achieve this. I would prefer to be able to give them permissions just to the workflow. If this can't be done how do I create users with Full access only to a single device or specific devices but Read-Only to other Devices? It's hard for me to believe that mixed Read/Full access permissions are still not available at this time!?
BackupDB.bat Problem
I execute BackupDB.bat and give me this error: file:C:\Program Files (x86)\ManageEngine\OpManager\conf\ui.properties Trying to get DB connection ..... Successfully connected to DB. Please wait ! Reading tables from configuration ..... Jun 6, 2013 7:58:07 AM com.adventnet.db.persistence.metadata.parser.DataDictiona ryParser getPrimaryKey WARNING: The PKName :: TempDependentUnavailableHourly_PK of tableName :: TempDep endentUnavailableHourly has 33 characters. Jun 6, 2013 7:58:07 AM com.adventnet.db.persistence.metadata.parser.DataDictiona
configure notifications for device which are down
Hi, How can i configure the notification for the devices when get down ? Best Regards
OpManager 10 not discovering all Hyper-V guests
Hi all, OpManager 10 doesn't seem to be discovering all Hyper-V guests on a given host - there are definitely two guests present, but OpManager is only showing one of them. If I add the missing guest manually, OpManager won't let me change the device category to "Virtual Device". Is there some way to force OpManager to detect all guests again? The Hyper-V host is running Windows Server 2012. Many thanks, alec -- My network security/forensics blog is at [url]http://wirewatcher.net[/url]
Notification Profile for interface threshold
Dear Concerns, I need to know that how i able to configure notification profile for interface threshold. Regards, Arshad
hardware sensor alerts
Hi, We have recently upgraded to opmanager version 10. We have observed that it detects the HW failures like power supply on cisco switches which is not available in ver 9.4. I want these alerts to be notified via mail? what is the procedure? Thanks, Sridhar
Sendin email in plain text
OpManager 10 build 10000 sends email alerts not in plain text. How to fix it?
Installing OpManager Enterprise / Probe
Dear goodnight. We will migrate from version essential for the enterprise, but rather would like to know, what the minimum requirements for installing the Probe? How many probes must have for 1000 devices, and what the minimum requirements for installation? How much is consumed I / O to disk in a probe? For 1000 devices which scenario recommended by ManageEngine? Thank you.
error restoring OpManager DB
Hi team ! I tried many time to restore a Production DB to a dev server and everytime i have an error : [05-30-2013]|[14:11:12:085]|[SEVERE] : jdbc.RestoreException: Error occurred while Restoring Data. at jdbc.RestoreDB.readFileAndRestoreData(RestoreDB.java:146) at jdbc.AbstractRestoreDB.restoreDB(AbstractRestoreDB.java:97) at jdbc.AbstractRestoreDB.doRestore(AbstractRestoreDB.java:416) at jdbc.RestoreBackup.restoreDB(RestoreBackup.java:81) at com.adventnet.me.opmanager.dbmanager.DataMaintenance$BackupRestoreWindow$RestoreRunThread.run(DataMaintenance.java:704)
DMS is waiting registration, Trend Anti Virus, Firewall ports opened and exlustion applied
Hi We use OpManager 9 enterprise (build 9101) and on the machine we also need to run our Anti Virus. It seems there is an issue with Trend Micro Officescan virus with OpManger and I have been working with support to help resolve the issue but still running into problems. I have been advised that I need to open firewall ports and set exclusions for the Antivirus, I have done this but still running into isssues. We have set up exclusions both on folder and application level and excluded the application
Exception when generating Visio diagram. Refer to the log file for details
Good morning to you all. With version 9.0.9011 and MS-Visio 2007 I was trying to import the map in XML format but I received the error message "Exception when generating Visio diagram. Refer to the log file for details" Can you help?
Build 9000 -Unable to fetch Managed Object details for the object
We are getting the error "Unable to fetch Managed Object details for the object : 10.150.0.18" when attempting to open up a recently added device. We get the same error "Unable to fetch Managed Object details for the object : undefined" when attempting to remove partitions that are under Performance Monitors for some Linux VMs running in ESXi. Also our ASA5510 that is at 10.10.6.1 is reported to be at 10.10.6.10, yet monitoring is working. I did run the RepairDB.sh, no changes except that it removed
active directory and opmanager
Hi, I can't understand if it's possible to use active directory monitoring tool with OpManager. Exactly, there is an add-on or it is inclused? thank you Regards Lorenzo
Alarm Escalation Rule only during Business Hours
Is there a way to implement Alarm Escalation Rules that are only alerting during certain times (exp. Business Hours)?
Change Title in OpManager
Dear ME Team, How i can change title in OpManager same like servisedesk.
Collation error in opmanager v10000
Situation : I have a prod server which is installed opmanager v10000 (but was upgraded from version 6 to 7, 8, 9 and 10) I have another dev server which is installed v9 then upgraded 10. Both are with MySQL database installed, in english language, but I used to put some field with accent. To test new SP I used to backup the prod DB and restore it on the dev server. since a while,... i'm NOT able to restore my full database or configdata backup to my dev server, because I always get an error concerning
OpManager and Silent Option
Hello, I want to install OpManager using the "-silent" option. Unfortunately, I find no documentation allowing me to use this option. I guess this option needs to use a configuration file. What are the options / keywords that i can use in this configuration file? How can i specify this file to the silent option ? Maybe this file can be generated from a previous install realised in console mode ? Thank you for your help. RG.
Customize Widget
Currently widgets cannot be customized to remove or add fields. For instance we would love to use the CCTV feature to show our users what is going on in IT. However we can't remove or change the way server names are displayed in the existing widgets. This is important because: 1. We don't want to reveal the host names of our servers to users for security reasons but its important to IT to use the host names in OpManager for monitoring. 2. The hostnames would make no sense to most users anyways.
Notification Profile - "Probe down" not working
Hi I would like to create a association with my nofication profile on the central server, if "any Probe is down". This is not possible,because I have to assign it to a device. How can I do this? thx
Rack View - Blade Servers
Question: Is there a way to create a blade or "multi-node" system within a U-space? Example, I have a Quad-node system in a 2U platform, and each of these 4 nodes has a managed IP address. I do not want to show them as four servers in the rack view, I want to show four IP addresses attached to a single 2U system. (Specifically, these are four ESX hosts running within a Quad node 2U SMC server) The same would apply to "twin" systems, which would be two nodes running within a single 1U system etc etc.
show only active alerts which are unassigne
Is there a possibility to creade a dashboard that shows only active alerts that are unassigned? In previous versions this was possible to select this. In SQL it would look like: SELECT FROM [opmcentral.[dbo.[Alert WHERE SEVERITY != '5' and WHO = 'Unacknowledge' Thx
Install user guide
How can I install full user guide? The original folder is ManageEngineOpManagerhelpuguide but new user guide zip use ManageEngineOpManagerhelpuuide. That result in path not found errors. I have tried changing path in ManageEngineOpManagerwebclientdevicesjsopmanagerJS.js //Peter
Avaya ERS Memory Utilization from OID calculation
I am attempting to create a custom monitor that will provide Memory Utilization for Avaya ERS 45xx/5xxx switches. Avaya allows access to an OID for Total Memory (.1.3.6.1.4.1.45.1.6.3.8.1.1.12) and one for Available Memory (.1.3.6.1.4.1.45.1.6.3.8.1.1.13). I have created monitors for these individual OIDs to be sure the data is available and correct results are returned. I would like to create the monitor and associate it with the Memory Utilization snapshot dial. I looked at the following KB
OpManager Notification Settings
Has anyone had an issues where the notification settings changing on their own? One day the team goes through and sets up the alerts in the notifications and the next day they have changed and some items are unchecked. My team swears that no one touch them but I find it hard to believe they can change on there own? Any ideas? Thank you,
OPmanager and Exchange 2010 support
When will you implement it? I need Exchange 2010 support in my monitoring software. I like Opmanager and want to buy it for our company, but we use Exchange 2010. I´m thinking of searching at other monitoring softwares if Exchange support in OPmanager implementation is too far away in the future.
How to optimize BBDD and server performance?
Hi all, We are running Opmanager and Netflow Analyser in a 4 quadcore and 4GB RAM server. We are experiencing bad performance (about 1000ms to charge the web pages) so we want to improve this performace. Any idea? Another question is that currently we have the BBDD installed at c:\ where there is few free space, so how can we change the BBDD to another disk with enough space? regards, Christian
Interface Alert
OpManager is showing various alerts some interfaces on the switch, why these alerts are appearing? Accessing the snapshot of the interface: Administrative Status - UP Operational Status - Down There are several interfaces that with this status are not generating alerts and wrong. Tiago Toledo - Bigode Blog: http://www.pastelariadigital.com.br
Openstack
Hi, I see that you have started building monitoring functions into Opmanager to cover EC2 and Azure cloud infrastructure. Are you going to be doing the same for the Openstack platform? This is already widely in use and would be most beneficial to include in Opmanager for our own (and I am sure many others) Infrastructure and add to the value we already get from your solution. Thanks Eugene
how can Opmanager alerts be sent to a GSM modem without serial port?
Hi there, It's a kind of Apollo13 rocket science we've seen in Hollywood. I want to connect a server with Opmanager Build 8812 to an existing SMS alarm system, named T, with GSM modem functionality but without COM port. T accepts only digital voltage input. Is there any work-around solution? B.
how change port for NCM NetFlow in opmanager
dear sir how can i change the plugins port in opmanager i use this C:\opmanager\bin>ChangeWebServerPort.bat but i encounter new error Error 102 (net::ERR_CONNECTION_REFUSED): The server refused the connection. the web page open but when try log in give me the error
Next Page