questions regarding Opmanager, Vendor MIB before buy it
Hi, We are busy to test OpManager and we found a very good product. But, there is all the time a "but" :-), maybe my knowledge is not good, we have some questions regarding our product. - MIB SNMP You have some vendor-specific mibs. Nice but how can we integrate this kind of mib for other products?? ( Like Veritas Backup Exec, for example ?? ) - Trap SNMP Same question. We have some Cisco routers which are well discovered but some trap isn't recognize. Just basic TRAP. How can we integrate this easily
Windows service monitoring
I have figured out how to setup monitoring for a custom Windows service through the admin tab. I have been unable to connect monitoring this service to a specific device. I have tried devices both as both a server or desktop
WMI - CPU Utilization Graphs shows much higher than actual
Have a problem on a couple 2000 Exchange servers, with the reported CPU utilization being reported *much* higher than actual. - The graphs are displaying each of the 4, CPU's polling at 98% utilization. - The web interface snapshot is showing a current (and constant) dial display of 98% CPU utilization. - The java interface snapshot shows a correct 1% utilization on the snapshot, but the associated graphs, display an ongoing utilization of 98% for each CPU. - Watching Performance monitor on the server
Backup
Hi, want to install opmanager on a other computer. How can I keep my configuration, graphs, reports, etc. so I can use these files in the new installed opmanager??
How do I Add a Telnet Option
I would like to add a telnet option to the Actions menu on the snapshot page of a device. How can I add the telnet option? Thanks
map to business view
Hi, Where dowload a new background image for my business view. Thanks Bruno Seafrance
Managed Firewall Device Cannot be added to a business view
We have 3 managed firewall devices, which we can access in the OpManager Firewalls category. We cannot however add any of these devices to a business view, unless we change them from Firewall to Switch/Router category. We've done this in order to add them to a business view, but as soon as we change them back to a firewall category, they disapear from any applied Business Views. Is this a bug? It would be appropriate for our application here to see these firewall devices in their proper business
How to send parameter with notification
How to send parameter with notification ? In notifications does this product can send parameter such as HOSTNAME CPU percent usage ,IP Address , Service Name and How to do this ??
How do I change Icons for Predefined/Standard Device Images
I have too many router icons to fit into my business-view If I were able to use smaller icons, I believe they would all fit. I have created smaller versions of the PNG files I need, and can use them with new devices I add, but I cannot find any place to change the icon associated with any given OID.
Device not responding
I monitor numerous remote routers across the entire spectrum on bandwidths. All of my routers which are connected via a 56k or 64k connection are reporting "DOWN" or "NOT RESPONDING" many times a day. However, they are not actually down, I believe OPManager just thinks they are because they take too long to respond. Is OpManager just doing a PING? If so, can I somehow increase the response time allowed?
How do I?
I'm evaluating OpManager for a possible purchase. We have downloaded and installed the 30day professional version. As I'm setting up my networks I have a few questions that I have not seen answered in the manual. 1. I have DLink switches and they are not automatically being seen by OpManager. The whole create your own device section is a bit fuzzy to me. Any suggestions on how I can add these to the system? 2. I have enabled SNMP on my Windows 2003 server. I have ran rediscover many times and it
after adding a business view they are gone from router view
Routers that have been setup properly and viewed in the infrastructure router view I created a Business view and added those routers to it. Now the infrastructure router view stats I have 31 routers but it only shows 12 I can search to the IP and through the business view and get to the device and it is still in the router grouping. HELP!!
Server Availability
One of my server is shown as unavailable, but it isn't so! Device Response Time = 0ms CPU Utilization 1 % Memory Utilization 43 % ...
SMS notifier
Hi I want to have a SMS notifier for Opmanger. Does someone know where I can find information about this???
Event Logs
Hi, I want to monitor event logs on my windows 2003 small business server (where opmanger is also installed) but when I have a few options clicked and I want to test it I don't get a alarm of that option. I'm sure that my domain name, login name and password are good. What can be the problem???
Server 2003 Discovery
I was running the auto discovery and none of my MS Server 2003 machines were discovered as a server. They were placed int he desktops grouping. Is there some configuration I need to enable on the server to allow the autodiscovery to work correctly? Thanks
user and password
Dear folks, I just have downloaded the OpManager and run it on my PC ... I do not know the user/password to login the Web interface ? What is the default userID/password ? Thanks Tin
notification for printers
I noticed that snmp enabled printers can notice if the toner is low, out of paper, etc. How would I have a notification email sent if it is out of paper or toner?
OpManager Wish list
Hi, I have a couple of Sun machines with many, many partitions that I am finetuning and I have a lot of trouble checking the threshold that I have set every time that I need to make a change (I have to check all partitions and that means a lot of clicks!). May be a good idea is to have a report to show the monitoring configuration (thersholds, polling time, user accounts used to poll, etc.) for each machine and for an individual machine... Regards, Rodrigo.
Windows XP Pro Firewall
I have a number of laptop users who have XP Pro (SP2) installed on their machines. As they are mobile I need to have their Windows Firewall active so that they can use hotspots, etc whilst out of the office. With the firewall on (and set with defaults) OpManager doesn't appear to be able to see them. What port(s) need to be opened in order for OpManager (& other AdventNet software - ServiceDesk) to see these machines? Thanx
Feature Request
Could we set the url warnings to have a dependancy on the web server they are running on? I had to reboot my web server today and got paged because 30 sites were down.
OpManager stops retrieving data
Hi. I have this issue. I have a Sun machine with about 25 partitions that I've being monitoring for several weeks. But with no apparent reason, OpManager stops getting disk utilization information on some partitions and shows NA on graph. If I click on the '30' button to see data for the last 30 days I see data until several days ago and after that, nothing. When trying to readd disk utilization monitor for all partitions I get Unable to configura graph error. Some of the partitions were succesfully
Error on setting up mail server
We are testing Opmanager at an external site and when I want to send a test message to an address outside of that domain, it gives this error: Invalid Addresses; nested exception is: class javax.mail.SendFailedException: 550 5.7.1 Unable to relay for (outside email address) If we use an email address that is inside that domain, it works perfectly.
Could I add a Infrastructure Views item ?
How could I add a Infrastructure View ? Why I add the device always didn't get the repond (http://172.30.0.241/topo/addNode.do) Thanks
Opmanager software for windows NT Operating system
Is there any version of Opmanager which supports Windows NT operating sytem?
Router with ip unnumbered
Hi, I have tried the method that you suggest with the script 'add-interface.sh' but unfortunately, it doesn't work..... I receive this error /AddInterface.sh xxx.xxx.xxx.xxx community 161 1 Exception in thread "main" java.lang.NoClassDefFoundError: com/adventnet/snmp/beans/SnmpTarget at AddInterfaceEntries.main(AddInterfaceEntries.java:25) If I change the device type to 'switch', I can see ALL interfaces ( also loopback, Ethernet which is not active, and so on....) When I come back to 'router', Opmanager
Java client
Sorry to bother you again but i've got another last question about this great product. I want to change the type of monitors using Manage engine in Java (resource monitors, traffic monitors, appilcation monitors, etc.) but i can't get set anything if i am using Java client. am i doing something wrong or isn't it possible to do it in Java client??? Thanks..
acces denied
Hi, i have added a windows 2003 server and i want to monitor disk utilization, free disk space, etc. but i get the message "access denied". My domain, login name and password are good for sure. I am using a WMI based monitor. What is the problem???
ping test
hi is there any way to check the time of the ping also is there any way to change the ping setting ?? thank you guy
Okidata Printers
i have 12 okidata 390 printers on my network this message i keep getting from one of them Varbinds on the alarm any idea what this is ??? Tim
snmptrapd.conf
does anyone know how to setup the snmptrapd.conf file? I would like to monitor hardware on my servers but I don't have anything to go on yet.
disk utilization on snapservers.
Hi, currently we have 3 snapservers which are basically nothing but NAS disk arrays. They run on linux, and I have snmp enabled on them. I notice that the disk utilization on the snapshot of the device will peg out at 100 percent, but if I do a diskspace usage report on them, that the devices still have plenty of diskspace. Does the disk utilization graph on the device snapshot show the access utilization or the size utilization?
How to change port number for opmanager 5.5
What are the port numbers opmanager 5.5 supports.If I want to change the port number what should I do
Security on log on
Ok, I was presenting this to some execs and a question came up on what is stopping someone from brute force attempts into the opmanager login webpage? Is there some security settings which stops a login after a few failed attempts?
Backup Exec services
Hi, I'm new to this toy so please bare with me. In Admin|Services i have added a new entry for Backup Exec Services with the relevant port number. I have created the following Windows Service Monitors using the option of restarting the service: Backup Exec Job Engine Backup Exec Remote Agent for Windows Servers Backup Exec Server Backup Exec Media and Device Service. I have created the Notification Profiles for Email and SMS. Criteria Options i have selected are the Backup Exec services. I have associated
Difficulties with SSH for Resource mon
Hi, Trying out the 30 days free Edition here and all in all it looks EXACTLY what we've been looking for, for our hosting solution. Right now Im running the OpManager on a win 2003 server, trying to set up non-smnp linux devices. Services etc are good, but now we want to check the resources, like memory, cpu and so on. So Ive done usual setup, checked the login prompt, password prompt and also the bash prompt. They're all default when logging on with ssh on that machine. So i checked /var/log/secure
delete network view
I accidently entered in a wrong network device and it created a new view for it. How can I delete an entire network view, but keep the rest!?
Bugs in OM - Monitoring Intervals & Web Interface View
Hi Have found a bug in sp3 onwards (i run 5004)... the new "firewall" and "url" views do not have a global option in either gui or web client to set monitoring interval the gui client lets you right click on the view and choose monitoring interval, but it does not have an option on the next screen. Also, in the web client, when you set your default view on firewalls to be "detail" and then do not have any firewalls that are reporting snmp data to the web client (its weird, the device shows snmp data
Wish List Item - Sort in Web Interface
Hi! I think a great feture would be to be able to sort by any column in ascending/descending order in the infrastructure views in the web client. This can be done in the gui clientbut not web, making it difficult to find a server quickly in a list of 100 in detail view in servers (as an example). It would be great to be able to sort by name, or by service monitor (eg have all IIS servers at the top of the list). Is it possible for this to be added to the roadmap? Thanks Dave
Don't refresh port status
Hi, I'm adding several switches to OpManager 5.5 build 5504 and at the firts time the port status appears correctly, but if I connect or disconnect one switch port the status don't changes never.I test it with web and java client.
Next Page