exchange
i have a exchange server on the opmanger server and when i want 2 acces the web interface it says that port :80 is already in use.
Monitor Opmanager
Can someone tell me what SNMP port Opmanager opens when it runs? I want to monitor my primary server by a secondary Opmanager just in case I loose the Primary.
non existant email support
Hi I have been trying to get support for OpManager for a month with no result. Have sent numerous emails to the support email address, with no response. Is this normal? It seems that everyone was responsive until our money was paid, but now its silence. Perhaps a support team member can look into this for me, and try to find out why nobody is responding? Thanks Dave
opmanager with mysql on different port
Hi Is it possible to run OpManager's mysql on a different port? The server in prod that it is being migrated to already runs mysql for another application.. Thanks
Device already present -- But I can't locate it
I was adding a server in which we were missing reverse DNS entry for. OpManager seemed to "hang" during the process of adding the device, and I couldn't tell if it completed. I had to refresh the page after a period of time, so I never received the confirmation notification that the device was added. Later, this server's NIC cards were "teamed" which brought into use, a new IP for the device. Additionally reverse name records for this new teamed IP were created. Originally I added the device with
Lotus Notes
I have set the port number for the two Lotus Notes Server to 1352 but OpManager is still not showing these servers as down. Is there something I'm missing here.
scripting
Hi, i have a few questions about opmanager 5.5. Is it possible to put in scripts like VBscript and batch files??? And is it possible with this program to look if my backup is successfully completed??? Kind Regards, Basj
Trouble-Ticketing and Asset management for OpManager Users
Hi, A lot of you have asked us for Asset Management, Software license tracking and trouble-ticketing functionality in these forums. Here's good news - We've just released a new Help Desk and Asset Management software - ManageEngine ServiceDesk plus Now you can have OpManager forward critical alarms as email notifications directly to the helpdesk email-ID and they get tracked as tickets in the ServiceDesk. You can also track your hardware / software inventory, manage software licenses and track purchase
Software Inventory
Using OpManager 5.5 is it possible to generate the Software Inventory report like # of Oracle and # of MS Office installed in the organization.
Starting JavaClient in Fedora
In Fedora Core 3 the Server starts without any error. The web browser work perfectly. However, when I try to run ./StartOpManagerClient.sh the following error occurs AFTER I put in my login name (admin) and password: locale init method : en_US LoginScreen Visible locale init method : en_US Exception in thread "AWT-EventQueue-0" java.lang.NullPointerException at javax.swing.plaf.synth.SynthContext.getPainter(Unknown Source) at javax.swing.plaf.synth.SynthPanelUI.update(Unknown Source) at javax.swing.JComponent.paintComponent(Unknown
Avaya IP Office phone system
Hi, Is there a trick to getting Opmanager to see an IP Office phone system ? I have set the IP Office to run SNMP on port 161 with a read key of public, but Opmanager does not see it as running SNMP. Any ideas ? Mark.
Custom Monitor not displaying graph
I'm monitoring a Cisco PIX 525 sucessfully using OpManager. The CPU and Memory monitoring is working a treat (I'm getting graphs). I've added a custom monitor which seems to be working correctly as the threshold I've set is displayed as normal but when I display the graph it just shows NA. The custom monitor I've configured is to monitor the current connections on the PIX. MRTG is able to understand and graph the values so I can only assume I'm doing something wrong! Here's the OID .1.3.6.1.4.1.9.9.147.1.2.2.2.1.5.40.6
OpManager: Managed Fedora Core 3 Server problem
I am running OpManager 5.5 on Window XP. I am having problem to manage Fedora Core 3 Server. The Fedora Server is running Net-SNMP 5.1.2 on it. On the OpManager I have a blue star on the Fedora Server, but I just can't pull any CPU, Memory, Disk Utilization info. I can't get Host resource from MIB Browser, but not all data are aviliable. Also, I have to use SNMPV1 or SNMPV2 to get MIB. If I use SNMPV3 to get MIB, it will fail. Please advise ASAP. Shaun
OpManager: Managed Fedora Core Server
Hi, We are team that implement the OpManager project for our school. However, we facing a problem to manage Fedora Core Server. We have installed the net-SNMP V2c package at the server and the agent is test running well by using the command SNMP-walk. But, when we add the device to the OpManager, it shown as non-SNMP nodes devices. Can anyone help us? This is very urgent case. FYI, we installed the OpManager at Window platform (Win XP prof.). The result from the SNMP-walk is attached in this discussion.
Services Down
i have tried on three difrent computers 2 windows xp and one windows server 2003 EE ever 5 hours or around then all servers show all services as down except exchange most are internal one is external everything else is fine with the monitering to fix the problem i have to restart the service
Software Report
I am able to view the Installed software on the Desktop successfully through OP Manager 5.5. Is it possible for me to export the same to the report....
Cisco event
Hi, how I can transmit the event of the switch and router Cisco in opmanager. I use a syslog server. How can opmanger treat these events?
Customizing the Web pages
Is there any way to customize the web pages other than the personalize feature. We would like to integrate our corporate information and look into the web page banners and such. Any help would be appreciated!
Exception in event logs rules
Hi We use event logs rules but some software make some errors and warnings on the application logs.We use the Any Application failure and Any Application warning. Is it possible to made some exclusion in op manager for exclude this errors in the notification profile??? kind regards
Can Opmanager monitor the system processes ?
May I know Opmanager can montior the Linux/Unix system processes like , Java , inetd and tomcat ? Thanks ~~
Opmanager on Linux
I just installed Opmanager on SuSE 9.2. When I run the startup script it is saying it can't start the mysql daemon. MYSQL is installed and running. Any ideas?
How to buy your products from Russia?
How to buy your products from Russia? (via Web or Reseller or even any more...)
Discovery
We entered all of our networks during the install process but only five of the eleven networks showed up. We attempted to manually enter them but got the message that the entry was already in the database. This is the 30 day trial installation.
connect to the OpManager database
i have run the OpManager in the other machine in LAN. now I want to connect to the mySQL database of OpManager, what program will help me to do this. (my purpose is show the table of the OpManager's database. Thank for your help in advance.
Browsing page
Hello, I am trying to view OpManager through a firewall using internet explorer with port 8899. Eg http://myserver:8899 Are there any other ports that I need to open up on the firewall to allow access because at the moment I cant get it. I have 8899 opened both ways. I also have port 80. Can anyone help? Daniel
Co-existence of applications
Hi, Can I install OpManager, Netflow and AppManager on the same server? I have had OpManager and Netflow running on the same box, I just remember reading something about issues with AppManager and OpManger together, is this the case? Thanks Andrew
WIFIMANAGER AND OPMANAGER WILL ONLY RUN ON DRIVE C?
NEW ISSUE: (I'll cross post this is part WifiManager too, because I hope it's important) In addition to evaluating OpUtils; I was evaluating WifiManager and OpManager too. I spent 12 !! straight hours trying to get those applications services to start. I figured it must be something in-common with the computer system itself (Two different programs not running and no one else posting about this issue- "that can't be a coincidence"). I tried everything, every permutation I could think of, port hacks,
Grouping router by name
can Opmanager grouping IP based on Name Like Router : 1.Cisco 2500 : - 10.64.68.7 - 10.64.68.9 - etc 2. Cisco 3600 : - 10.64.68.2 - 10.64.68.10 etc 3. Cisco 7500 : - 10.64.68.12 - 10.64.68.15 Server : 1.Linux : - 10.64.68.20 - 10.64.68.25 - etc 2. Windows 2003 : - 10.64.68.28 3. Database : - MySql 1 - Exchange 2000 etc Thx for your support
OpManager: Managed Fedora Core 3 Server Problem
Hi, I am using OpManager 5.5 on Window XP. And I am having problem manage a Fedora Core 3 Server. The server is running Net-SNMP 5.1.2. I am able to use MIB Browser to get Host-Resource MIB from the server. But have to use either SNMPV1 or SNMPV2. It will fail if i use SNMPV3. The problem is I can pull data for CPU, Memory, Disk Utilization. And I have blue star on that Fedora Core 3 Server. Please adivse what should I do. Thank you Shaun
High CPU usage
Like the feel of this product but still getting problems with high CPU usage between 60% to 80% when the application is running. Task manager reports Java.exe is hogging the CPU when app launched. Is anyone else experiencing this problem currently running it on a Compaq DL380 with 1.4Ghz CPU 1.5 Gb memory. :cry:
OpManager: Managed Fedora Core Server Problem
Hi, We are team of school that implement network management using your OpManager 5.5 Free Edition. We facing the problem to manage the Fedora Core server. We already install the net-SNMP package on the server and the command SNMP-walk is sucessful get response from it. But, the server added to OpManager is shown as non-SNMP node. No blue star appeared. We need further guide on it and looking toward hearing from you asap. Thank You! FYI, we installed the OpManager at Windows Platform (XP Prof.).
Dell 2850, not recognized as SNMP enabled
I have a Dell PowerEdge 2850 with dual NIC interfaces. I have tried adding/deleting the server using both IP's. Neither one shows as being SNMP enabled. This server is running Windows 2003 Standard. I recently installed 3 brand new Dell PowerEdge 750's, and the 2850. I configured SNMP exactly the same on all 4 machines. The 3 750's detect SNMP just fine, the 2850 does not.
Alert notification sounds don't work
Hi, Having installed the free version of OpManager on a test machine, I found that I had to reinstall Java after installing OpManager to get the alert notification sounds to work - but now, installing it on the machine intended to be used as a network monitor, this doesn't seem to work! Should the sound function work right 'out of the box', or do I need to copy / run something before they will work? (Also, is there any way to get a sound to loop until the alert is cleared?)
CPU, Disk Space, Memory not polling
I'm not sure if the SNMP is not configured correctly or what, but these items are not being polled / data collected correctly. Also exchange monitor seems to appear as always sbeeing down but I know this is functional- any assistance would be great. Thanks, Tony
Problems monitoring servers with OpManager
I've enabled the SNMP on all servers but aside from one server, I cannot view the graph or whatever information regarding the servers. I'm currently using OpManager to monitor 4 windows 2000 server and two Solaris 8 servers. Although all the servers have SNMP enabled, OpManager doesnt show the blue star indicating it. One of the servers with a blue star indicating SNMP enabled doesn't even show the graphs for the Resource Monitors and I cannot generate the report for the server. Can anyone tell me
How to copy configuration in Windows to Linux(fedora core3)
Hi all, Can Opmanager copy that configuration which i create in Windows to Linux(fedora Core3)?? Regards Riko
OpManager 5, Linux (Fedora), cant access via WEB, Client ok.
New install of OpManager 5 free on Fedora 2. Had issues with 2 shared libs which I installed from RPM's which stopped the server and client running. However, while I can run the server and the client ok on the box, any connection to the WEB interface results in the logon screen where I login ok but the next page just shows the word "Error!" and a hard break (line). I have re-installed but get the same problem. Anyone know what the problem is and the fix please? I cant see anything similar on the
406 error in URL monitor
Recently i've seen an error in monitoring one of our websites. This is the error i get. 406: The resource identified by the request is only capable of generating response entities which have content characteristics not acceptable according to the accept headers sent in the request. "; It worked fine for a while, but i am not able to get this error cleared. I've deleted the object, recreated it, and i still get this error The website is functioning as normal. Any thoughts?
I can't find device to add to business view
Hello, I have discovered a new device by IP address. We have not created a forward or reverse DNS entry for security purposes. Opmanager shows the device as managed (blue start in upper right corner). The problem occurs when I try to add the device to a business view - right click, properties. The device does not show in the "All devices" list. How do I add the device to my business view? Thanks in advance.
Custom Graphs gets no data from objects with instance index
Hello, with the MIB Browser i get the following data (OID .iso.org.dod.internet.private.enterprises.emerson.liebertCorp.liebertUps.luExtensions.luCore.lcUpsOutput.lcUpsOutputTable.lcUpsOutputEntry.lcUpsOutputCurrent) lcUpsOutputCurrent.1:5 lcUpsOutputCurrent.2:4 lcUpsOutputCurrent.3:5 (OID .iso.org.dod.internet.private.enterprises.emerson.liebertCorp.liebertUps.luExtensions.luCore.lcUpsOutput.lcUpsOutputTable.lcUpsOutputEntry.lcUpsOutputCurrent.1) lcUpsOutputCurrent.1:5 If i create a Custom Monitor
Next Page