bandwidth threshold alert
My apologies if this has been asked before. I am currently evaluating opmanager. Is there a way when monitoring a switch to trap a threshold on a single port to send an alert? For example, port 6 on a switch has a threshold set of 10MB, if it hits 12MB can I set up opmanager to send me a page? How is this setup?
Deleted a network
I have deleted a network hoping to be able to re-add the same network to re-discover all the devices on this network once again. The problem that I�m having is that it will not let me add this network back as it says that it already exists but there are no devices in it any longer. Is there a way to make sure this network is deleted from the database so that I can re-discover it and all the devices as well. The devices are still present if you do an individual search on them so they have not been
Incorrect IP address/Duplicate devices listed
Hello, we have just changed the IP address of one of our switches, and now if I do a search, it shows me a device on either IP - although only the correct IP address is specified in both device properties. It's as if they are the same device. Also, when I click on custom reports and search for a device it shows me only one switch - Switch[wrong.ip.address.] Any ideas - thanks, Adrian.
IP Address error!!!!
When I try to discover my network, and type in my network address for the lan: 192.168.1.1, it brings back this error: "Please enter a valid Network Address " I have tried all different IP addresses and it won't accpet anything I type in. Ranges won't work either. Can someone please help?
Problem on monitoring the PIX Firewall and Netscreen 50
I have some problem on monitoring PIX and Netscreen on Opmanager. While add the device , the Opmanager can't identify what it is. And the SNMP mark now shown even SNMP already started in PIX and Netscreen. Then I select the device type by myself (why no Netscreen 50 to choice ??), and input the password of the device. But it still can't monitor the device status. It is Opmanager setting problem? or PIX and Netscreen SNMP setting problem ?? Thanks all support ~
servers coming up as desktop
Just added my six servers and 2 worked fine and came up under the server list, but then the other 4 came up as desktops, what can i do to get this to configure correctly
The Monitor do not respond
TotalBandwidthUtilization OID (.1.3.6.1.2.1.2.2.1.10+.1.3.6.1.2.1.2.2.1.16)*8*100/(.1.3.6.1.2.1.2.2.1.5*$DELTA_TIME) I have added the following cotume graph to my Cisco AS5300 and I am not getting any result from this I have tested the monitor and I get the message The Monitor do not respond. Why? I have other graphs assignd to this Cisco and all are working!
The Monitor do not respond
Monitor Name TotalBandwidthUtilization OID (.1.3.6.1.2.1.2.2.1.10+.1.3.6.1.2.1.2.2.1.16)*8*100/(.1.3.6.1.2.1.2.2.1.5*$DELTA_TIME) I have set a monitor to my Cisco AS5300 and I am not getting respond for this. can some one help? I have other graphs set for this cisco and all are working accept this one.
Question for MIB & Hardware Monitor
Sir, 1. Some MIB return value is a string not number. Example: SysLocation. I don't think it can use the "Custom Monitors". So...how to retrive and show it on the device snapshot page? 2. We have many server with SCSI RAID system. Like HP and IBM. If one HD fail, the system still up. It will not have an alarm. So...is it possible to monitor this kind of problem by OpManager? Sam.
Feature Enhancement Request - Trap Processor (save) page beh
I'm editing the 55th page of snmp trap processors (out of a total of well over 100 pages, 100 x 10 processors for page=too many to browse back to in a hurry). When I save a change, I'm returned back to the 1st page of trap processors. I would like instead by default to return to the current page I'm working on. An option to returning to the 1st page, could be offered with the presence of perhaps a seperate link or command button. Thank you much :)
Cisco PIX 515E 7.0(1) monitoring
We just purchased OpManager and I added our PIX 515E firewall to the list and get this message: AuthenticationFailure : .1.3.6.1.4.1.9.1.451 COMFWL243.gfsiinc.com Cisco Cisco PIX Security Appliance Version 7.0(1) Not sure what this means. I want to make sure I can monitor everything I can about this firewall. Thanks John
Cant see pix interfaces
Hi, I have enabled snmp on my pix 515 but I still can�t see its interfaces, memory, or cpu usage, even when I see it under firewalls, what is wrong ?
Unable to send SM alert
I have been unable to send an SMS alert. This is absolutely vital for our usage. If I set up an alert with a valid email address it works just fine, as soon as I change it to eg: "0427374220@sms.link.com.au" it just dissappears completely. To expand: I have enabled mail relay for the machine hosting Opmanger, I can send to the SMS address using BLAT at the command line or competitors product (I am evaluating both) GFI NSM and both work just fine when the address is changed. So there is no problem
Partition Utilization
Is it possible to monitor disk partition usage as a percentage of that partition? I've found that I can monitor partition free space and used space, but not percent used for that partition only. Thanks, TK
Devices not displaying by name - just IP
About ten percent of our devices don't resolve to name, they are just displayed with the IP address. I have deleted, re-added using the FQDN but it still displayed with just the IP address. Also, is there a way to create a custom report to find out how many of the servers are running mssql or another process? Thanks, Mark
CPU Utilization Mod to XLM file
I am trying to monitor the CPU Utilization of a Application Firewall using the private enterprise MIB. I added a new resource monitor section in the opmanager_graphInfo.xml file, stopped and started opmanager. I added the resource monitor to the application firewall but no data. I did a test of the new resource monitor and it appended a .0 to the end of the OID. Why did the application append this suffix. Monitor Name CPUUtilization Protocol SNMP OID .1.3.6.1.4.1.7118.3.1.25.1.1.2.18.47.99.108.117.115.116.101.114.47.99.105.115.108.97.98.110.99.52.0
Reducing the size of the active area
Hi, Is there a way to reduce the gab between the status indicator and the name of the device as displayed on the webclient. Can the colour of the text too be changed ? If possible how can these be acheived . Thankx . Fox
Sending GOOD messages
Hi, in the former product we used to monitor our network (devices) there was a possibility to create a so called GOOD message, which means that you receive (in our case) an email that tells you the device is working again. That's especially helpful if you only have short interruptions and the error condition 'disappeared' by itself. Is there a way to do so in Opmanager?? :?:
Error parsing MIB:CISCO-C2900-MIB.my
So this is the error I am getting. I am trying to load a MIB that will allow me to see the backplanes on Cisco 2950s. Error parsing MIB:CISCO-C2900-MIB.my ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Can't restart distant service, as Telnet for ex.
hello! i'm testing opmanager on 2 windows 2003, on a workgroup. i'm viewing for restart services when one is down. on the local server with console, there's no problem. service restart. but for the other server managed, the first with console reporting that service is down, but can't restart this one. the local administrator are the same, with same password. RPC is launched. thanks for your answer! Petrus
after DB restore notification profiles lost
hy everybody, i have restore the opmanager database with the restore bat file from opmanager home directory ,it works without a failure, but after the restore the notification profiles are lost. all other data, for example servermaps are exist. wy are the notification profiles lost after a database restore? who can i backup the notification profiles? thanks for help, chris
URL Monitor
Is it possible to use a different proxy server for each URL monitoring profile? The reason for that is we have two internet connections from two different ISP�s and each connection has its own proxy server. I would like to use URL monitoring to monitor the availability of the internet connection as sometimes the internet connection goes down while the router interface remains up. I guess the only way to overcome such a limitation is to configure two URL monitors one for each ISP but to do that I
Intel NetportExpress Print Servers
Hi Have have a number of NetportExpress(tm) 10 Single-port Print Server's on our network and was looking for advise on the following. I have added the device type but they are discovered as desktops. Is it possible to get these to be discovered as printers, and show the status simular to HP printServers? I have downloaded the mib files from intel, but if I try to load traps from MIB, it displays :- "Could not parse the file D:/Program Files/AdventNet/ME/OpManager/./mibs/NP11.MIB The error occured
Unable to access Nokia MIBs
I have a Nokia appliance running Checkpoint. I would like to retrieve information from the Nokia MIBs. I have followed the instructions to copy the MIBS to the ./mibs directory. I get the following error when I try to load the MIB from MIB Browser: Error parsing MIB:NOKIA-IPSO-LBCLUSTER-MIB.txt Is there an error log where I can find out the particular parsing error? I have attached the MIB file. Thanks, Jeff
Interface traffic chart reports wrong information
We are currenlty testing OpManager in our environment and we are seeing some errors. The issues we are seeing is on a interface on a Cisco 6509. OpManager is reporting the max Tx traffic to be 40,000 kbps or 40 Mbps. On another monitoring tool we have had in for awhile the same interface is showing 400 Mbps..... So that tells me that one of these is wrong, but I am set to believ OpManager might be the culprit since this is a 2.0 Gb uplink interface. Has anyone else experienced issues like this before.
AIX monitoring
Hello, I'm trying to monitor some AIX servers via SNMP, but I have some problem, for example, even if I'm able to browse the CPU utilization with the command : HOST-RESOURCES-MIB::hrProcessorLoad.1 = INTEGER: 0 HOST-RESOURCES-MIB::hrProcessorLoad.2 = INTEGER: 0 I tried to add the corresponding resource monitor (snmp, cpu utilization via HOST-RESOURCES) but OpManager complains about the monitor is not responding
Creating Auto-Login links for the webclient
Im trying to link op manager to an existing website that I have. The trick is that I want to link to op manager from the current site and not have to login. So basically I need to know what code I need to make this auto login take place. Let me know. Thanks!
Cannot add Network to Discovery
I have just installed the demo of OpManager. When I try to add a network to the Discovery, it keeps telling me "Enter a valid network address". I have tried the following combinations: Network Address: 172.21.29.195 (my IP on my local network) Subnet: 255.255.0.0 (to include my other subnets of 172.21.29.*, 172.21.30.*, 172.21.31.*) I have also tried Subnet 255.255.255.0 I have also tried Network addresses 172.21.29.1, 172.21.29.255, etc... Nothing works! Please help! What am I missing? :oops:
MS Exchange 2000 / Upgrade Opmanager 5.0 to 5.6
Hi, I upgrade opmanager 5.0 to 5.6 following these procedure: 1.- Applied pack to 5.0 (build number 5004). Result opmanager 5.5. 2.- Applied pack to 5.5 (build number 5504). Result opmanager 5.6 After this procedure, in the snapshot for server (running exchange 2000), I tried to add application monitor for exchange 2000, and the menu display MS Exchange 5.5. The most importan chatracteristic to opmanager 5.6 is monitor exchange 2000/2003 but after upgrade don�t appears this option. Thank
Test of OpManager, support needed
Hi all! I'm testing OpManager with the intensions of replacing CA UniCenter. But I've got a few problems with HP-UX and Netware servers. Netware: The netware servers are running the hostmib.nlm (20040805) and I can use mib browser to see all required information. The CPU utilization monitor also work. This monitor are using the CPU Utilization based on HOSTRESOURCE MIB. But what should I do with disk and memory monitors? I know I could make custom monitors, but these things should work straight out
Email Notification
Hi, When I try to set up email proxy, and go to test message, I get the following error message: Unable to connect to the mail server. Please check if the Mail service is running on the specified port. The port I used was 25. The mail has to go through an Exchange server. Is there perhaps another port that must be used. Please help
HP-UX CPU Utilization
I'm trying to get the %CPU Utilization out of an HP-UX 900/300 via the "hp-unix" MIB. The following is the custom monitor: <CUSTOMGRAPH Name="HPUXCPUUtilization"> <YAXISTEXT>%</YAXISTEXT> <DISPLAYNAME>HP-UX % CPU Utilization</DISPLAYNAME> <name>HPUXCPUUtilization</name> <oid> (((.1.3.6.1.4.1.11.2.3.1.1.13)+(.1.3.6.1.4.1.11.2.3.1.1.14)) / ((.1.3.6.1.4.1.11.2.3.1.1.13)+(.1.3.6.1.4.1.11.2.3.1.1.14)+(.1.3.6.1.4.1.11.2.3.1.1.15))) * 100 </oid> <type>node</type> <timeAvg/> <interval>900</interval> <THRESHOLDENABLED>false</THRESHOLDENABLED>
How to get MS-SQL Server Stats
Hi, I have a Win2000 Server with Microsoft SQL Server 2000 installed. Windows is SNMP-enabled, and I have no trouble seeing it on my servers view. It also recognizes the MSSQL port. But, how do I configure my server and/or OpManager to view the information about the database statistics? I've seen it as a feature on the web site, but don't know how to enable it.... thanks!
2 Items
1) I see in another post that I am supposed to be able to setup Exchange 2000 monitoring items under applications. I only see Exchange 5.5. Where are the Exchange 2000 items? 2) None of the WMI items appear to work properly. I have removed the SNMP items that are setup by default, and replaced them with WMI for processor, memory and disk. If I go to test, I get a tests OK message, and the graphs get updated. No further updates take place, the last polled is blank, and the next polling time is set
CPU Utilization monitoring - buglet?
I noticed that CPU monitoring only checks UCD-SNMP-MIB::ssCpuUser.0 but neglects to figure in UCD-SNMP-MIB::ssCpuSystem.0 (or UCD-SNMP-MIB::ssCpuIdle.0 for that matter). A server that has very high system CPU overhead will be graphed incorrectly in this case.
SNMP Trap Processors not capturing Trap Description from MIB
In order to make the notifications for Traps received understandable, I would like the notifications to focus on the "Trap Description" I would like in fact, to use the "Trap Description" in the subject line and exclude the OIDs. Here's an example from Trap Tests sent from an IBM Blade Center Management Module (BLADESPPALT-MIB) From OpManager "Load Traps from MIB" displays trap from above mib as: Trap Name__________ Description ibmMMTrapSysLogS___"System Alert: System Log 75% full." ... Trap notification
Data storage pattern
Hi, In a similar vein to this: http://forums.manageengine.com/forumHome.do?forumGroupId=49000000002007&forumTopicId=49000002654223 ...what are the data storage patterns for OpManager? many thanks, alec
How To notify certain people about certain servers
That is basically it. We have a few managers that only care about certain servers, how do we get them notified about critical events on only those servers? Version 5.6. Thanks!
service monitoring problem on a server with two lancards
i face a problem to monitor a service on an windows machine (server) with two lancards. the monitored service communicates via the 2nd card, opmanager has discovered this server via lancard 1. The service is indicated as "down" in opmanager. is there anything i can do to handle this ? The service must communicate this way !
Add notes to any device please!!
Hi I would love to be able to add notes to any device in the same way you can add notes to an alarm. This would allow the system to be used for change management (any changes could be logged as a note) Also, I would really like to be able to attach external files (or at least hyperlinks) so that device configurations, contract documents etc can be readily accessed from the device within OpManger. It would be good to extend the integration with ServcieDesk so that any device can be linked to any asset
Next Page